diff options
Diffstat (limited to 'protocol/usb_hid')
51 files changed, 0 insertions, 8569 deletions
diff --git a/protocol/usb_hid/README b/protocol/usb_hid/README deleted file mode 100644 index 0d2efc2aa2..0000000000 --- a/protocol/usb_hid/README +++ /dev/null @@ -1,47 +0,0 @@ -USB HID protocol -================ -Host side of USB HID keyboard protocol implementation. -Only standard HID Boot mode is supported at this time. This means most of normal keyboards are supported while proprietary >6KRO and NKRO is not. - -Third party Libraries ---------------------- -USB_Host_Shield_2.0 - Circuits@Home repository is git-submoduled. Do git submodule init & update to get the content. - https://github.com/felis/USB_Host_Shield_2.0 - -arduino-1.0.1 - Arduino files copied from: - https://github.com/arduino/Arduino/hardware/arduino/{cores,variants} - - -Test build ----------- -In test directory; - $ make - $ DEV=/dev/ttyACM0 make program - -You can see HID keyboard reports on debug output. - - -Restriction and Bug -------------------- -Not supported/confirmed yet. - Hub, suspend, keyboard LED - -Switching power on VBUS: - To power reset device. - http://www.circuitsathome.com/camera-control/simulating-cable-disconnect-on-usb-host-shield-2-0 - This is needed for a device which are not initilized with 'USB Bus Reset'(long SE0) - -Can't bus-reset a keyboard which already attached on bus properly. - Slow start up of Leonardo's bootloader causes this? - Need to unplug/plug a keyboard after firmware starts up. - MAX3421E doesn't work SAMPLEBUS well to know whether device connected or not. - -Keyboard with other endpoints than boot keyboard may go wrong. - On my keyboard with mouse key the converter locks up when using mouse key function. - -Can't compile on Windows filesystem. - On Linux no problem. - Windows doesn't know difference between common/print.h and arduino/Print.h. - Change file name common/print.h to console.h ? diff --git a/protocol/usb_hid/USB_Host_Shield_2.0 b/protocol/usb_hid/USB_Host_Shield_2.0 deleted file mode 160000 -Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4 diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h deleted file mode 100644 index 830c9952fb..0000000000 --- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h +++ /dev/null @@ -1,215 +0,0 @@ -#ifndef Arduino_h -#define Arduino_h - -#include <stdlib.h> -#include <string.h> -#include <math.h> - -#include <avr/pgmspace.h> -#include <avr/io.h> -#include <avr/interrupt.h> - -#include "binary.h" - -#ifdef __cplusplus -extern "C"{ -#endif - -#define HIGH 0x1 -#define LOW 0x0 - -#define INPUT 0x0 -#define OUTPUT 0x1 -#define INPUT_PULLUP 0x2 - -#define true 0x1 -#define false 0x0 - -#define PI 3.1415926535897932384626433832795 -#define HALF_PI 1.5707963267948966192313216916398 -#define TWO_PI 6.283185307179586476925286766559 -#define DEG_TO_RAD 0.017453292519943295769236907684886 -#define RAD_TO_DEG 57.295779513082320876798154814105 - -#define SERIAL 0x0 -#define DISPLAY 0x1 - -#define LSBFIRST 0 -#define MSBFIRST 1 - -#define CHANGE 1 -#define FALLING 2 -#define RISING 3 - -#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) -#define DEFAULT 0 -#define EXTERNAL 1 -#define INTERNAL 2 -#else -#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) -#define INTERNAL1V1 2 -#define INTERNAL2V56 3 -#else -#define INTERNAL 3 -#endif -#define DEFAULT 1 -#define EXTERNAL 0 -#endif - -// undefine stdlib's abs if encountered -#ifdef abs -#undef abs -#endif - -#define min(a,b) ((a)<(b)?(a):(b)) -#define max(a,b) ((a)>(b)?(a):(b)) -#define abs(x) ((x)>0?(x):-(x)) -#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) -#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) -#define radians(deg) ((deg)*DEG_TO_RAD) -#define degrees(rad) ((rad)*RAD_TO_DEG) -#define sq(x) ((x)*(x)) - -#define interrupts() sei() -#define noInterrupts() cli() - -#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) -#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) -#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) - -#define lowByte(w) ((uint8_t) ((w) & 0xff)) -#define highByte(w) ((uint8_t) ((w) >> 8)) - -#define bitRead(value, bit) (((value) >> (bit)) & 0x01) -#define bitSet(value, bit) ((value) |= (1UL << (bit))) -#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) -#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) - - -typedef unsigned int word; - -#define bit(b) (1UL << (b)) - -typedef uint8_t boolean; -typedef uint8_t byte; - -void init(void); - -void pinMode(uint8_t, uint8_t); -void digitalWrite(uint8_t, uint8_t); -int digitalRead(uint8_t); -int analogRead(uint8_t); -void analogReference(uint8_t mode); -void analogWrite(uint8_t, int); - -unsigned long millis(void); -unsigned long micros(void); -void delay(unsigned long); -void delayMicroseconds(unsigned int us); -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); - -void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); -uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); - -void attachInterrupt(uint8_t, void (*)(void), int mode); -void detachInterrupt(uint8_t); - -void setup(void); -void loop(void); - -// Get the bit location within the hardware port of the given virtual pin. -// This comes from the pins_*.c file for the active board configuration. - -#define analogInPinToBit(P) (P) - -// On the ATmega1280, the addresses of some of the port registers are -// greater than 255, so we can't store them in uint8_t's. -extern const uint16_t PROGMEM port_to_mode_PGM[]; -extern const uint16_t PROGMEM port_to_input_PGM[]; -extern const uint16_t PROGMEM port_to_output_PGM[]; - -extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; -// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; -extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; -extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; - -// Get the bit location within the hardware port of the given virtual pin. -// This comes from the pins_*.c file for the active board configuration. -// -// These perform slightly better as macros compared to inline functions -// -#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) -#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) -#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) -#define analogInPinToBit(P) (P) -#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) -#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) -#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) - -#define NOT_A_PIN 0 -#define NOT_A_PORT 0 - -#ifdef ARDUINO_MAIN -#define PA 1 -#define PB 2 -#define PC 3 -#define PD 4 -#define PE 5 -#define PF 6 -#define PG 7 -#define PH 8 -#define PJ 10 -#define PK 11 -#define PL 12 -#endif - -#define NOT_ON_TIMER 0 -#define TIMER0A 1 -#define TIMER0B 2 -#define TIMER1A 3 -#define TIMER1B 4 -#define TIMER2 5 -#define TIMER2A 6 -#define TIMER2B 7 - -#define TIMER3A 8 -#define TIMER3B 9 -#define TIMER3C 10 -#define TIMER4A 11 -#define TIMER4B 12 -#define TIMER4C 13 -#define TIMER4D 14 -#define TIMER5A 15 -#define TIMER5B 16 -#define TIMER5C 17 - -#ifdef __cplusplus -} // extern "C" -#endif - -#ifdef __cplusplus -#include "WCharacter.h" -#include "WString.h" -#include "HardwareSerial.h" - -uint16_t makeWord(uint16_t w); -uint16_t makeWord(byte h, byte l); - -#define word(...) makeWord(__VA_ARGS__) - -unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); - -void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); -void noTone(uint8_t _pin); - -// WMath prototypes -long random(long); -long random(long, long); -void randomSeed(unsigned int); -long map(long, long, long, long, long); - -#endif - -#include "pins_arduino.h" - -#endif diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp b/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp deleted file mode 100644 index 1ee3a488a5..0000000000 --- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp +++ /dev/null @@ -1,233 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" -#include "USBAPI.h" -#include <avr/wdt.h> - -#if defined(USBCON) -#ifdef CDC_ENABLED - -#if (RAMEND < 1000) -#define SERIAL_BUFFER_SIZE 16 -#else -#define SERIAL_BUFFER_SIZE 64 -#endif - -struct ring_buffer -{ - unsigned char buffer[SERIAL_BUFFER_SIZE]; - volatile int head; - volatile int tail; -}; - -ring_buffer cdc_rx_buffer = { { 0 }, 0, 0}; - -typedef struct -{ - u32 dwDTERate; - u8 bCharFormat; - u8 bParityType; - u8 bDataBits; - u8 lineState; -} LineInfo; - -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; - -#define WEAK __attribute__ ((weak)) - -extern const CDCDescriptor _cdcInterface PROGMEM; -const CDCDescriptor _cdcInterface = -{ - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) -}; - -int WEAK CDC_GetInterface(u8* interfaceNum) -{ - interfaceNum[0] += 2; // uses 2 - return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); -} - -bool WEAK CDC_Setup(Setup& setup) -{ - u8 r = setup.bRequest; - u8 requestType = setup.bmRequestType; - - if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) - { - if (CDC_GET_LINE_CODING == r) - { - USB_SendControl(0,(void*)&_usbLineInfo,7); - return true; - } - } - - if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) - { - if (CDC_SET_LINE_CODING == r) - { - USB_RecvControl((void*)&_usbLineInfo,7); - return true; - } - - if (CDC_SET_CONTROL_LINE_STATE == r) - { - _usbLineInfo.lineState = setup.wValueL; - - // auto-reset into the bootloader is triggered when the port, already - // open at 1200 bps, is closed. this is the signal to start the watchdog - // with a relatively long period so it can finish housekeeping tasks - // like servicing endpoints before the sketch ends - if (1200 == _usbLineInfo.dwDTERate) { - // We check DTR state to determine if host port is open (bit 0 of lineState). - if ((_usbLineInfo.lineState & 0x01) == 0) { - *(uint16_t *)0x0800 = 0x7777; - wdt_enable(WDTO_120MS); - } else { - // Most OSs do some intermediate steps when configuring ports and DTR can - // twiggle more than once before stabilizing. - // To avoid spurious resets we set the watchdog to 250ms and eventually - // cancel if DTR goes back high. - - wdt_disable(); - wdt_reset(); - *(uint16_t *)0x0800 = 0x0; - } - } - return true; - } - } - return false; -} - - -int _serialPeek = -1; -void Serial_::begin(uint16_t baud_count) -{ -} - -void Serial_::end(void) -{ -} - -void Serial_::accept(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - int c = USB_Recv(CDC_RX); - int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE; - - // if we should be storing the received character into the location - // just before the tail (meaning that the head would advance to the - // current location of the tail), we're about to overflow the buffer - // and so we don't write the character or advance the head. - if (i != buffer->tail) { - buffer->buffer[buffer->head] = c; - buffer->head = i; - } -} - -int Serial_::available(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE; -} - -int Serial_::peek(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - if (buffer->head == buffer->tail) { - return -1; - } else { - return buffer->buffer[buffer->tail]; - } -} - -int Serial_::read(void) -{ - ring_buffer *buffer = &cdc_rx_buffer; - // if the head isn't ahead of the tail, we don't have any characters - if (buffer->head == buffer->tail) { - return -1; - } else { - unsigned char c = buffer->buffer[buffer->tail]; - buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE; - return c; - } -} - -void Serial_::flush(void) -{ - USB_Flush(CDC_TX); -} - -size_t Serial_::write(uint8_t c) -{ - /* only try to send bytes if the high-level CDC connection itself - is open (not just the pipe) - the OS should set lineState when the port - is opened and clear lineState when the port is closed. - bytes sent before the user opens the connection or after - the connection is closed are lost - just like with a UART. */ - - // TODO - ZE - check behavior on different OSes and test what happens if an - // open connection isn't broken cleanly (cable is yanked out, host dies - // or locks up, or host virtual serial port hangs) - if (_usbLineInfo.lineState > 0) { - int r = USB_Send(CDC_TX,&c,1); - if (r > 0) { - return r; - } else { - setWriteError(); - return 0; - } - } - setWriteError(); - return 0; -} - -// This operator is a convenient way for a sketch to check whether the -// port has actually been configured and opened by the host (as opposed -// to just being connected to the host). It can be used, for example, in -// setup() before printing to ensure that an application on the host is -// actually ready to receive and display the data. -// We add a short delay before returning to fix a bug observed by Federico -// where the port is configured (lineState != 0) but not quite opened. -Serial_::operator bool() { - bool result = false; - if (_usbLineInfo.lineState > 0) - result = true; - delay(10); - return result; -} - -Serial_ Serial; - -#endif -#endif /* if defined(USBCON) */ diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h deleted file mode 100644 index ea134838a2..0000000000 --- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef client_h -#define client_h -#include "Print.h" -#include "Stream.h" -#include "IPAddress.h" - -class Client : public Stream { - -public: - virtual int connect(IPAddress ip, uint16_t port) =0; - virtual int connect(const char *host, uint16_t port) =0; - virtual size_t write(uint8_t) =0; - virtual size_t write(const uint8_t *buf, size_t size) =0; - virtual int available() = 0; - virtual int read() = 0; - virtual int read(uint8_t *buf, size_t size) = 0; - virtual int peek() = 0; - virtual void flush() = 0; - virtual void stop() = 0; - virtual uint8_t connected() = 0; - virtual operator bool() = 0; -protected: - uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); }; -}; - -#endif diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp b/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp deleted file mode 100644 index ac63608449..0000000000 --- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp +++ /dev/null @@ -1,520 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" -#include "USBAPI.h" -#include "USBDesc.h" - -#if defined(USBCON) -#ifdef HID_ENABLED - -//#define RAWHID_ENABLED - -// Singletons for mouse and keyboard - -Mouse_ Mouse; -Keyboard_ Keyboard; - -//================================================================================ -//================================================================================ - -// HID report descriptor - -#define LSB(_x) ((_x) & 0xFF) -#define MSB(_x) ((_x) >> 8) - -#define RAWHID_USAGE_PAGE 0xFFC0 -#define RAWHID_USAGE 0x0C00 -#define RAWHID_TX_SIZE 64 -#define RAWHID_RX_SIZE 64 - -extern const u8 _hidReportDescriptor[] PROGMEM; -const u8 _hidReportDescriptor[] = { - - // Mouse - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 54 - 0x09, 0x02, // USAGE (Mouse) - 0xa1, 0x01, // COLLECTION (Application) - 0x09, 0x01, // USAGE (Pointer) - 0xa1, 0x00, // COLLECTION (Physical) - 0x85, 0x01, // REPORT_ID (1) - 0x05, 0x09, // USAGE_PAGE (Button) - 0x19, 0x01, // USAGE_MINIMUM (Button 1) - 0x29, 0x03, // USAGE_MAXIMUM (Button 3) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x01, // LOGICAL_MAXIMUM (1) - 0x95, 0x03, // REPORT_COUNT (3) - 0x75, 0x01, // REPORT_SIZE (1) - 0x81, 0x02, // INPUT (Data,Var,Abs) - 0x95, 0x01, // REPORT_COUNT (1) - 0x75, 0x05, // REPORT_SIZE (5) - 0x81, 0x03, // INPUT (Cnst,Var,Abs) - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) - 0x09, 0x30, // USAGE (X) - 0x09, 0x31, // USAGE (Y) - 0x09, 0x38, // USAGE (Wheel) - 0x15, 0x81, // LOGICAL_MINIMUM (-127) - 0x25, 0x7f, // LOGICAL_MAXIMUM (127) - 0x75, 0x08, // REPORT_SIZE (8) - 0x95, 0x03, // REPORT_COUNT (3) - 0x81, 0x06, // INPUT (Data,Var,Rel) - 0xc0, // END_COLLECTION - 0xc0, // END_COLLECTION - - // Keyboard - 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 47 - 0x09, 0x06, // USAGE (Keyboard) - 0xa1, 0x01, // COLLECTION (Application) - 0x85, 0x02, // REPORT_ID (2) - 0x05, 0x07, // USAGE_PAGE (Keyboard) - - 0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl) - 0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x01, // LOGICAL_MAXIMUM (1) - 0x75, 0x01, // REPORT_SIZE (1) - - 0x95, 0x08, // REPORT_COUNT (8) - 0x81, 0x02, // INPUT (Data,Var,Abs) - 0x95, 0x01, // REPORT_COUNT (1) - 0x75, 0x08, // REPORT_SIZE (8) - 0x81, 0x03, // INPUT (Cnst,Var,Abs) - - 0x95, 0x06, // REPORT_COUNT (6) - 0x75, 0x08, // REPORT_SIZE (8) - 0x15, 0x00, // LOGICAL_MINIMUM (0) - 0x25, 0x65, // LOGICAL_MAXIMUM (101) - 0x05, 0x07, // USAGE_PAGE (Keyboard) - - 0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated)) - 0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application) - 0x81, 0x00, // INPUT (Data,Ary,Abs) - 0xc0, // END_COLLECTION - -#if RAWHID_ENABLED - // RAW HID - 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 - 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), - - 0xA1, 0x01, // Collection 0x01 - 0x85, 0x03, // REPORT_ID (3) - 0x75, 0x08, // report size = 8 bits - 0x15, 0x00, // logical minimum = 0 - 0x26, 0xFF, 0x00, // logical maximum = 255 - - 0x95, 64, // report count TX - 0x09, 0x01, // usage - 0x81, 0x02, // Input (array) |