Remove core library and build files

51 files changed, 0 insertions, 8569 deletions

diff --git a/protocol/usb_hid/README b/protocol/usb_hid/README
deleted file mode 100644
index 0d2efc2aa2..0000000000
--- a/protocol/usb_hid/README
+++ /dev/null
@@ -1,47 +0,0 @@
-USB HID protocol
-================
-Host side of USB HID keyboard protocol implementation.
-Only standard HID Boot mode is supported at this time. This means most of normal keyboards are supported while proprietary >6KRO and NKRO is not.
-
-Third party Libraries
----------------------
-USB_Host_Shield_2.0
-    Circuits@Home repository is git-submoduled. Do git submodule init & update to get the content.
-    https://github.com/felis/USB_Host_Shield_2.0
-
-arduino-1.0.1
-    Arduino files copied from:
-    https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}
-
-
-Test build
-----------
-In test directory;
-    $ make
-    $ DEV=/dev/ttyACM0 make program
-
-You can see HID keyboard reports on debug output.
-
-
-Restriction and Bug
--------------------
-Not supported/confirmed yet.
-    Hub, suspend, keyboard LED
-
-Switching power on VBUS:
-    To power reset device.
-    http://www.circuitsathome.com/camera-control/simulating-cable-disconnect-on-usb-host-shield-2-0
-    This is needed for a device which are not initilized with 'USB Bus Reset'(long SE0)
-
-Can't bus-reset a keyboard which already attached on bus properly.
-    Slow start up of Leonardo's bootloader causes this?
-    Need to unplug/plug a keyboard after firmware starts up.
-    MAX3421E doesn't work SAMPLEBUS well to know whether device connected or not.
-
-Keyboard with other endpoints than boot keyboard may go wrong.
-    On my keyboard with mouse key the converter locks up when using mouse key function.
-
-Can't compile on Windows filesystem.
-    On Linux no problem.
-    Windows doesn't know difference between common/print.h and arduino/Print.h.
-    Change file name common/print.h to console.h ?
diff --git a/protocol/usb_hid/USB_Host_Shield_2.0 b/protocol/usb_hid/USB_Host_Shield_2.0
deleted file mode 160000
-Subproject 7c2e6c1bcdcc22cfdbd82edd9d8fc4c4276ead4
diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h
deleted file mode 100644
index 830c9952fb..0000000000
--- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Arduino.h
+++ /dev/null
@@ -1,215 +0,0 @@
-#ifndef Arduino_h
-#define Arduino_h
-
-#include <stdlib.h>
-#include <string.h>
-#include <math.h>
-
-#include <avr/pgmspace.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-
-#include "binary.h"
-
-#ifdef __cplusplus
-extern "C"{
-#endif
-
-#define HIGH 0x1
-#define LOW  0x0
-
-#define INPUT 0x0
-#define OUTPUT 0x1
-#define INPUT_PULLUP 0x2
-
-#define true 0x1
-#define false 0x0
-
-#define PI 3.1415926535897932384626433832795
-#define HALF_PI 1.5707963267948966192313216916398
-#define TWO_PI 6.283185307179586476925286766559
-#define DEG_TO_RAD 0.017453292519943295769236907684886
-#define RAD_TO_DEG 57.295779513082320876798154814105
-
-#define SERIAL  0x0
-#define DISPLAY 0x1
-
-#define LSBFIRST 0
-#define MSBFIRST 1
-
-#define CHANGE 1
-#define FALLING 2
-#define RISING 3
-
-#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)
-#define DEFAULT 0
-#define EXTERNAL 1
-#define INTERNAL 2
-#else  
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) 
-#define INTERNAL1V1 2
-#define INTERNAL2V56 3
-#else
-#define INTERNAL 3
-#endif
-#define DEFAULT 1
-#define EXTERNAL 0
-#endif
-
-// undefine stdlib's abs if encountered
-#ifdef abs
-#undef abs
-#endif
-
-#define min(a,b) ((a)<(b)?(a):(b))
-#define max(a,b) ((a)>(b)?(a):(b))
-#define abs(x) ((x)>0?(x):-(x))
-#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
-#define radians(deg) ((deg)*DEG_TO_RAD)
-#define degrees(rad) ((rad)*RAD_TO_DEG)
-#define sq(x) ((x)*(x))
-
-#define interrupts() sei()
-#define noInterrupts() cli()
-
-#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
-#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
-#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
-
-#define lowByte(w) ((uint8_t) ((w) & 0xff))
-#define highByte(w) ((uint8_t) ((w) >> 8))
-
-#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
-#define bitSet(value, bit) ((value) |= (1UL << (bit)))
-#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
-
-
-typedef unsigned int word;
-
-#define bit(b) (1UL << (b))
-
-typedef uint8_t boolean;
-typedef uint8_t byte;
-
-void init(void);
-
-void pinMode(uint8_t, uint8_t);
-void digitalWrite(uint8_t, uint8_t);
-int digitalRead(uint8_t);
-int analogRead(uint8_t);
-void analogReference(uint8_t mode);
-void analogWrite(uint8_t, int);
-
-unsigned long millis(void);
-unsigned long micros(void);
-void delay(unsigned long);
-void delayMicroseconds(unsigned int us);
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
-
-void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
-uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
-
-void attachInterrupt(uint8_t, void (*)(void), int mode);
-void detachInterrupt(uint8_t);
-
-void setup(void);
-void loop(void);
-
-// Get the bit location within the hardware port of the given virtual pin.
-// This comes from the pins_*.c file for the active board configuration.
-
-#define analogInPinToBit(P) (P)
-
-// On the ATmega1280, the addresses of some of the port registers are
-// greater than 255, so we can't store them in uint8_t's.
-extern const uint16_t PROGMEM port_to_mode_PGM[];
-extern const uint16_t PROGMEM port_to_input_PGM[];
-extern const uint16_t PROGMEM port_to_output_PGM[];
-
-extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
-// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
-
-// Get the bit location within the hardware port of the given virtual pin.
-// This comes from the pins_*.c file for the active board configuration.
-// 
-// These perform slightly better as macros compared to inline functions
-//
-#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
-#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
-#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
-#define analogInPinToBit(P) (P)
-#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
-#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
-#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
-
-#define NOT_A_PIN 0
-#define NOT_A_PORT 0
-
-#ifdef ARDUINO_MAIN
-#define PA 1
-#define PB 2
-#define PC 3
-#define PD 4
-#define PE 5
-#define PF 6
-#define PG 7
-#define PH 8
-#define PJ 10
-#define PK 11
-#define PL 12
-#endif
-
-#define NOT_ON_TIMER 0
-#define TIMER0A 1
-#define TIMER0B 2
-#define TIMER1A 3
-#define TIMER1B 4
-#define TIMER2  5
-#define TIMER2A 6
-#define TIMER2B 7
-
-#define TIMER3A 8
-#define TIMER3B 9
-#define TIMER3C 10
-#define TIMER4A 11
-#define TIMER4B 12
-#define TIMER4C 13
-#define TIMER4D 14	
-#define TIMER5A 15
-#define TIMER5B 16
-#define TIMER5C 17
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-#ifdef __cplusplus
-#include "WCharacter.h"
-#include "WString.h"
-#include "HardwareSerial.h"
-
-uint16_t makeWord(uint16_t w);
-uint16_t makeWord(byte h, byte l);
-
-#define word(...) makeWord(__VA_ARGS__)
-
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
-
-void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
-void noTone(uint8_t _pin);
-
-// WMath prototypes
-long random(long);
-long random(long, long);
-void randomSeed(unsigned int);
-long map(long, long, long, long, long);
-
-#endif
-
-#include "pins_arduino.h"
-
-#endif
diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp b/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp
deleted file mode 100644
index 1ee3a488a5..0000000000
--- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/CDC.cpp
+++ /dev/null
@@ -1,233 +0,0 @@
-
-
-/* Copyright (c) 2011, Peter Barrett  
-**  
-** Permission to use, copy, modify, and/or distribute this software for  
-** any purpose with or without fee is hereby granted, provided that the  
-** above copyright notice and this permission notice appear in all copies.  
-** 
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL  
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED  
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR  
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES  
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,  
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS  
-** SOFTWARE.  
-*/
-
-#include "Platform.h"
-#include "USBAPI.h"
-#include <avr/wdt.h>
-
-#if defined(USBCON)
-#ifdef CDC_ENABLED
-
-#if (RAMEND < 1000)
-#define SERIAL_BUFFER_SIZE 16
-#else
-#define SERIAL_BUFFER_SIZE 64
-#endif
-
-struct ring_buffer
-{
-	unsigned char buffer[SERIAL_BUFFER_SIZE];
-	volatile int head;
-	volatile int tail;
-};
-
-ring_buffer cdc_rx_buffer = { { 0 }, 0, 0};
-
-typedef struct
-{
-	u32	dwDTERate;
-	u8	bCharFormat;
-	u8 	bParityType;
-	u8 	bDataBits;
-	u8	lineState;
-} LineInfo;
-
-static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
-
-#define WEAK __attribute__ ((weak))
-
-extern const CDCDescriptor _cdcInterface PROGMEM;
-const CDCDescriptor _cdcInterface =
-{
-	D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
-
-	//	CDC communication interface
-	D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
-	D_CDCCS(CDC_HEADER,0x10,0x01),								// Header (1.10 bcd)
-	D_CDCCS(CDC_CALL_MANAGEMENT,1,1),							// Device handles call management (not)
-	D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6),				// SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
-	D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE),	// Communication interface is master, data interface is slave 0
-	D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
-
-	//	CDC data interface
-	D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
-	D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
-	D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
-};
-
-int WEAK CDC_GetInterface(u8* interfaceNum)
-{
-	interfaceNum[0] += 2;	// uses 2
-	return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface));
-}
-
-bool WEAK CDC_Setup(Setup& setup)
-{
-	u8 r = setup.bRequest;
-	u8 requestType = setup.bmRequestType;
-
-	if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
-	{
-		if (CDC_GET_LINE_CODING == r)
-		{
-			USB_SendControl(0,(void*)&_usbLineInfo,7);
-			return true;
-		}
-	}
-
-	if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
-	{
-		if (CDC_SET_LINE_CODING == r)
-		{
-			USB_RecvControl((void*)&_usbLineInfo,7);
-			return true;
-		}
-
-		if (CDC_SET_CONTROL_LINE_STATE == r)
-		{
-			_usbLineInfo.lineState = setup.wValueL;
-
-			// auto-reset into the bootloader is triggered when the port, already 
-			// open at 1200 bps, is closed.  this is the signal to start the watchdog
-			// with a relatively long period so it can finish housekeeping tasks
-			// like servicing endpoints before the sketch ends
-			if (1200 == _usbLineInfo.dwDTERate) {
-				// We check DTR state to determine if host port is open (bit 0 of lineState).
-				if ((_usbLineInfo.lineState & 0x01) == 0) {
-					*(uint16_t *)0x0800 = 0x7777;
-					wdt_enable(WDTO_120MS);
-				} else {
-					// Most OSs do some intermediate steps when configuring ports and DTR can
-					// twiggle more than once before stabilizing.
-					// To avoid spurious resets we set the watchdog to 250ms and eventually
-					// cancel if DTR goes back high.
-	
-					wdt_disable();
-					wdt_reset();
-					*(uint16_t *)0x0800 = 0x0;
-				}
-			}
-			return true;
-		}
-	}
-	return false;
-}
-
-
-int _serialPeek = -1;
-void Serial_::begin(uint16_t baud_count)
-{
-}
-
-void Serial_::end(void)
-{
-}
-
-void Serial_::accept(void) 
-{
-	ring_buffer *buffer = &cdc_rx_buffer;
-	int c = USB_Recv(CDC_RX); 
-	int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
-	
-	// if we should be storing the received character into the location
-	// just before the tail (meaning that the head would advance to the
-	// current location of the tail), we're about to overflow the buffer
-	// and so we don't write the character or advance the head.
-	if (i != buffer->tail) {
-		buffer->buffer[buffer->head] = c;
-		buffer->head = i;
-	}
-}
-
-int Serial_::available(void)
-{
-	ring_buffer *buffer = &cdc_rx_buffer;
-	return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE;
-}
-
-int Serial_::peek(void)
-{
-	ring_buffer *buffer = &cdc_rx_buffer;
-	if (buffer->head == buffer->tail) {
-		return -1;
-	} else {
-		return buffer->buffer[buffer->tail];
-	}
-}
-
-int Serial_::read(void)
-{
-	ring_buffer *buffer = &cdc_rx_buffer;
-	// if the head isn't ahead of the tail, we don't have any characters
-	if (buffer->head == buffer->tail) {
-		return -1;
-	} else {
-		unsigned char c = buffer->buffer[buffer->tail];
-		buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE;
-		return c;
-	}	
-}
-
-void Serial_::flush(void)
-{
-	USB_Flush(CDC_TX);
-}
-
-size_t Serial_::write(uint8_t c)
-{
-	/* only try to send bytes if the high-level CDC connection itself 
-	 is open (not just the pipe) - the OS should set lineState when the port
-	 is opened and clear lineState when the port is closed.
-	 bytes sent before the user opens the connection or after
-	 the connection is closed are lost - just like with a UART. */
-	
-	// TODO - ZE - check behavior on different OSes and test what happens if an
-	// open connection isn't broken cleanly (cable is yanked out, host dies
-	// or locks up, or host virtual serial port hangs)
-	if (_usbLineInfo.lineState > 0)	{
-		int r = USB_Send(CDC_TX,&c,1);
-		if (r > 0) {
-			return r;
-		} else {
-			setWriteError();
-			return 0;
-		}
-	}
-	setWriteError();
-	return 0;
-}
-
-// This operator is a convenient way for a sketch to check whether the
-// port has actually been configured and opened by the host (as opposed
-// to just being connected to the host).  It can be used, for example, in 
-// setup() before printing to ensure that an application on the host is
-// actually ready to receive and display the data.
-// We add a short delay before returning to fix a bug observed by Federico
-// where the port is configured (lineState != 0) but not quite opened.
-Serial_::operator bool() {
-	bool result = false;
-	if (_usbLineInfo.lineState > 0) 
-		result = true;
-	delay(10);
-	return result;
-}
-
-Serial_ Serial;
-
-#endif
-#endif /* if defined(USBCON) */
diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h b/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h
deleted file mode 100644
index ea134838a2..0000000000
--- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/Client.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef client_h
-#define client_h
-#include "Print.h"
-#include "Stream.h"
-#include "IPAddress.h"
-
-class Client : public Stream {
-
-public:
-  virtual int connect(IPAddress ip, uint16_t port) =0;
-  virtual int connect(const char *host, uint16_t port) =0;
-  virtual size_t write(uint8_t) =0;
-  virtual size_t write(const uint8_t *buf, size_t size) =0;
-  virtual int available() = 0;
-  virtual int read() = 0;
-  virtual int read(uint8_t *buf, size_t size) = 0;
-  virtual int peek() = 0;
-  virtual void flush() = 0;
-  virtual void stop() = 0;
-  virtual uint8_t connected() = 0;
-  virtual operator bool() = 0;
-protected:
-  uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
-};
-
-#endif
diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp b/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp
deleted file mode 100644
index ac63608449..0000000000
--- a/protocol/usb_hid/arduino-1.0.1/cores/arduino/HID.cpp
+++ /dev/null
@@ -1,520 +0,0 @@
-
-
-/* Copyright (c) 2011, Peter Barrett  
-**  
-** Permission to use, copy, modify, and/or distribute this software for  
-** any purpose with or without fee is hereby granted, provided that the  
-** above copyright notice and this permission notice appear in all copies.  
-** 
-** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL  
-** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED  
-** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR  
-** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES  
-** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,  
-** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
-** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS  
-** SOFTWARE.  
-*/
-
-#include "Platform.h"
-#include "USBAPI.h"
-#include "USBDesc.h"
-
-#if defined(USBCON)
-#ifdef HID_ENABLED
-
-//#define RAWHID_ENABLED
-
-//	Singletons for mouse and keyboard
-
-Mouse_ Mouse;
-Keyboard_ Keyboard;
-
-//================================================================================
-//================================================================================
-
-//	HID report descriptor
-
-#define LSB(_x) ((_x) & 0xFF)
-#define MSB(_x) ((_x) >> 8)
-
-#define RAWHID_USAGE_PAGE	0xFFC0
-#define RAWHID_USAGE		0x0C00
-#define RAWHID_TX_SIZE 64
-#define RAWHID_RX_SIZE 64
-
-extern const u8 _hidReportDescriptor[] PROGMEM;
-const u8 _hidReportDescriptor[] = {
-	
-	//	Mouse
-    0x05, 0x01,                    // USAGE_PAGE (Generic Desktop)	// 54
-    0x09, 0x02,                    // USAGE (Mouse)
-    0xa1, 0x01,                    // COLLECTION (Application)
-    0x09, 0x01,                    //   USAGE (Pointer)
-    0xa1, 0x00,                    //   COLLECTION (Physical)
-    0x85, 0x01,                    //     REPORT_ID (1)
-    0x05, 0x09,                    //     USAGE_PAGE (Button)
-    0x19, 0x01,                    //     USAGE_MINIMUM (Button 1)
-    0x29, 0x03,                    //     USAGE_MAXIMUM (Button 3)
-    0x15, 0x00,                    //     LOGICAL_MINIMUM (0)
-    0x25, 0x01,                    //     LOGICAL_MAXIMUM (1)
-    0x95, 0x03,                    //     REPORT_COUNT (3)
-    0x75, 0x01,                    //     REPORT_SIZE (1)
-    0x81, 0x02,                    //     INPUT (Data,Var,Abs)
-    0x95, 0x01,                    //     REPORT_COUNT (1)
-    0x75, 0x05,                    //     REPORT_SIZE (5)
-    0x81, 0x03,                    //     INPUT (Cnst,Var,Abs)
-    0x05, 0x01,                    //     USAGE_PAGE (Generic Desktop)
-    0x09, 0x30,                    //     USAGE (X)
-    0x09, 0x31,                    //     USAGE (Y)
-    0x09, 0x38,                    //     USAGE (Wheel)
-    0x15, 0x81,                    //     LOGICAL_MINIMUM (-127)
-    0x25, 0x7f,                    //     LOGICAL_MAXIMUM (127)
-    0x75, 0x08,                    //     REPORT_SIZE (8)
-    0x95, 0x03,                    //     REPORT_COUNT (3)
-    0x81, 0x06,                    //     INPUT (Data,Var,Rel)
-    0xc0,                          //   END_COLLECTION
-    0xc0,                          // END_COLLECTION
-
-	//	Keyboard
-    0x05, 0x01,                    // USAGE_PAGE (Generic Desktop)	// 47
-    0x09, 0x06,                    // USAGE (Keyboard)
-    0xa1, 0x01,                    // COLLECTION (Application)
-    0x85, 0x02,                    //   REPORT_ID (2)
-    0x05, 0x07,                    //   USAGE_PAGE (Keyboard)
-   
-	0x19, 0xe0,                    //   USAGE_MINIMUM (Keyboard LeftControl)
-    0x29, 0xe7,                    //   USAGE_MAXIMUM (Keyboard Right GUI)
-    0x15, 0x00,                    //   LOGICAL_MINIMUM (0)
-    0x25, 0x01,                    //   LOGICAL_MAXIMUM (1)
-    0x75, 0x01,                    //   REPORT_SIZE (1)
-    
-	0x95, 0x08,                    //   REPORT_COUNT (8)
-    0x81, 0x02,                    //   INPUT (Data,Var,Abs)
-    0x95, 0x01,                    //   REPORT_COUNT (1)
-    0x75, 0x08,                    //   REPORT_SIZE (8)
-    0x81, 0x03,                    //   INPUT (Cnst,Var,Abs)
-    
-	0x95, 0x06,                    //   REPORT_COUNT (6)
-    0x75, 0x08,                    //   REPORT_SIZE (8)
-    0x15, 0x00,                    //   LOGICAL_MINIMUM (0)
-    0x25,