diff options
Diffstat (limited to 'keyboards')
23 files changed, 1077 insertions, 0 deletions
diff --git a/keyboards/frobiac/blackbowl/blackbowl.h b/keyboards/frobiac/blackbowl/blackbowl.h new file mode 100644 index 0000000000..21ebee897e --- /dev/null +++ b/keyboards/frobiac/blackbowl/blackbowl.h @@ -0,0 +1,32 @@ +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" +#include <stdint.h> +#include <stdbool.h> +#include "i2c_master.h" +#include "wait.h" + +extern uint8_t expander_status; +extern uint8_t expander_input_pin_mask; +extern bool i2c_initialized; + +void init_blackbowl(void); +void init_expander(void); + +// clang-format off +#define I2C_TIMEOUT 100 +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define GPPUA 0x0C // GPIO pull-up resistor register +#define GPPUB 0x0D +#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) +#define GPIOB 0x13 +#define OLATA 0x14 // output latch register +#define OLATB 0x15 + +#define xxx KC_NO + +// clang-format on diff --git a/keyboards/frobiac/blackbowl/config.h b/keyboards/frobiac/blackbowl/config.h new file mode 100644 index 0000000000..cb13e69423 --- /dev/null +++ b/keyboards/frobiac/blackbowl/config.h @@ -0,0 +1,56 @@ +// Copyright 2012 Jun Wako <wakojun@gmail.com> +// Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +// Copyright 2017 Erin Call <hello@erincall.com> +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define MATRIX_ROWS 10 +#define MATRIX_COLS 4 +#define EXPANDER_COL_REGISTER GPIOA +#define EXPANDER_ROW_REGISTER GPIOB + +#ifdef PS2_MOUSE_ENABLE +# define PS2_MOUSE_USE_REMOTE_MODE +# define PS2_MOUSE_INIT_DELAY 1000 +#endif + +// clang-format off +#ifdef PS2_DRIVER_USART + +# define PS2_CLOCK_PIN D5 +# define PS2_DATA_PIN D2 + + /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ + /* set DDR of CLOCK as input to be slave */ + #define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR1C = ((1 << UMSEL10) | \ + (3 << UPM10) | \ + (0 << USBS1) | \ + (3 << UCSZ10) | \ + (0 << UCPOL1)); \ + UCSR1A = 0; \ + UBRR1H = 0; \ + UBRR1L = 0; \ + } while (0) + #define PS2_USART_RX_INT_ON() do { \ + UCSR1B = ((1 << RXCIE1) | \ + (1 << RXEN1)); \ + } while (0) + #define PS2_USART_RX_POLL_ON() do { \ + UCSR1B = (1 << RXEN1); \ + } while (0) + #define PS2_USART_OFF() do { \ + UCSR1C = 0; \ + UCSR1B &= ~((1 << RXEN1) | \ + (1 << TXEN1)); \ + } while (0) + #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) + #define PS2_USART_RX_DATA UDR1 + #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) + #define PS2_USART_RX_VECT USART1_RX_vect +#endif + diff --git a/keyboards/frobiac/blackbowl/info.json b/keyboards/frobiac/blackbowl/info.json new file mode 100644 index 0000000000..9c66e8655d --- /dev/null +++ b/keyboards/frobiac/blackbowl/info.json @@ -0,0 +1,85 @@ +{ + "manufacturer": "frobiac", + "keyboard_name": "blackbowl", + "url": "https://www.github.com/frobiac/adnw", + "maintainer": "frobiac", + "bootloader": "halfkay", + "processor": "atmega32u4", + "diode_direction": "ROW2COL", + "features": { + "audio": false, + "backlight": false, + "bootmagic": false, + "command": false, + "console": false, + "dynamic_macro": true, + "extrakey": true, + "mousekey": true, + "nkro": false, + "unicode": false, + "rgblight": false + }, + "build": { + "lto": true + }, + "usb": { + "device_version": "1.0.0", + "pid": "0x1D50", + "vid": "0x6033" + }, + "matrix_pins": { + "cols": [ null, null, null, null ], + "rows": [ null, null, null, null, null, null, null, null, null, null ] + }, + "layouts": { + "LAYOUT": { + "layout": [ + {"matrix": [5, 3], "label":"K", "x":0, "y":1.00}, + {"matrix": [6, 3], "label":"U", "x":1, "y":0.50}, + {"matrix": [7, 3], "label":"Q", "x":2, "y":0.00}, + {"matrix": [8, 3], "label":".", "x":3, "y":0.00}, + {"matrix": [9, 3], "label":"J", "x":4, "y":0.00}, + + {"matrix": [0, 3], "label":"P", "x":6, "y":0.00}, + {"matrix": [1, 3], "label":"C", "x":7, "y":0.00}, + {"matrix": [2, 3], "label":"L", "x":8, "y":0.00}, + {"matrix": [3, 3], "label":"M", "x":9, "y":0.50}, + {"matrix": [4, 3], "label":"F", "x":10, "y":1.00}, + + {"matrix": [5, 2], "label":"H", "x":0, "y":2.00}, + {"matrix": [6, 2], "label":"I", "x":1, "y":1.50}, + {"matrix": [7, 2], "label":"E", "x":2, "y":1.00}, + {"matrix": [8, 2], "label":"A", "x":3, "y":1.00}, + {"matrix": [9, 2], "label":"O", "x":4, "y":1.00}, + + {"matrix": [0, 2], "label":"D", "x":6, "y":1.00}, + {"matrix": [1, 2], "label":"T", "x":7, "y":1.00}, + {"matrix": [2, 2], "label":"R", "x":8, "y":1.00}, + {"matrix": [3, 2], "label":"N", "x":9, "y":1.50}, + {"matrix": [4, 2], "label":"S", "x":10, "y":2.00}, + + {"matrix": [5, 1], "label":"X", "x":0, "y":3.00}, + {"matrix": [6, 1], "label":"Y", "x":1, "y":2.50}, + {"matrix": [7, 1], "label":"-", "x":2, "y":2.00}, + {"matrix": [8, 1], "label":",", "x":3, "y":2.00}, + {"matrix": [9, 1], "label":"/", "x":4, "y":2.00}, + + {"matrix": [0, 1], "label":"B", "x":6, "y":2.00}, + {"matrix": [1, 1], "label":"G", "x":7, "y":2.00}, + {"matrix": [2, 1], "label":"W", "x":8, "y":2.00}, + {"matrix": [3, 1], "label":"V", "x":9, "y":2.50}, + {"matrix": [4, 1], "label":"Z", "x":10, "y":3.00}, + + {"matrix": [5, 0], "label":" ", "x":0, "y":0.00}, + {"matrix": [7, 0], "label":"Gui", "x":2, "y":3.00}, + {"matrix": [8, 0], "label":"tab", "x":3, "y":3.00}, + {"matrix": [9, 0], "label":"spc", "x":4, "y":3.00}, + + {"matrix": [0, 0], "label":"L2", "x":6, "y":3.00}, + {"matrix": [1, 0], "label":"Sh", "x":7, "y":3.00}, + {"matrix": [2, 0], "label":"L3", "x":8, "y":3.00}, + {"matrix": [4, 0], "label":"Fx", "x":10, "y":0.00} + ] + } + } +} diff --git a/keyboards/frobiac/blackbowl/keymaps/default/keymap.c b/keyboards/frobiac/blackbowl/keymaps/default/keymap.c new file mode 100644 index 0000000000..d85215ea04 --- /dev/null +++ b/keyboards/frobiac/blackbowl/keymaps/default/keymap.c @@ -0,0 +1,85 @@ +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +#include "keymap_german.h" + +enum layer_number { + _ADNW = 0, + _QWERTZ, + _NAVNUM, + _SYMBOL, + _FUNC, + _MOUSE, +}; + +#define CTL_TAB LCTL_T(KC_TAB) +#define ALT_SPC LALT_T(KC_SPC) +#define NAV_ESC LT(_NAVNUM, KC_ESC) +#define SFT_BSP LSFT_T(KC_BSPC) +#define SYM_ENT LT(_SYMBOL, KC_ENT) +#define MOUSE_X LT(_MOUSE, KC_X) +#define MOUSE_Y LT(_MOUSE, KC_Y) + +/* + * ┌───┐ ┌───┬───┬───┐ ┌───┬───┬───┐ ┌───┐ + * │MOU├───┤ Q │ . │ J │ │ P │ C │ L ├───┤Fx │ + * ├───┤ U ├───┼───┼───┤ ├─[TP]──┼───┤ M ├───┤ + * │ K ├───┤ E │ A │ O │ │ D │ T │ R ├───R F │ + * ├───┤ I ├───┼───┼───┤ ├───┼───┼───┤ N ├───┤ + * │ H ├───┤ - │ ; │ / │ │ D │ G │ W ├───┤ S │ + * ├───┤ Y ├───┼───┼───┤ ├───┼───┼───┤ V ├───┤ + * │ X ├───┤ │Tab│Spc│ │Esc│Bsp│Ret├───┤ Z │ + * └───┘ └───┴───┴───┘ └───┴───┴───┘ └───┘ + * + */ + +// clang-format off + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_ADNW] = LAYOUT( + KC_K, KC_U, KC_Q, KC_DOT, KC_J, KC_P, KC_C, KC_L, KC_M, KC_F, + KC_H, KC_I, KC_E, KC_A, KC_O, KC_D, KC_T, KC_R, KC_N, KC_S, + MOUSE_X, DE_Y, DE_MINS, KC_COMM, DE_SLSH, KC_B, KC_G, KC_W, KC_V, RSFT_T(DE_Z), + XXXXXXX, KC_LGUI, CTL_TAB, ALT_SPC, NAV_ESC, SFT_BSP, SYM_ENT, MO(_FUNC) + ), + + [_QWERTZ] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + MOUSE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), + XXXXXXX, KC_LGUI, CTL_TAB, ALT_SPC, NAV_ESC, SFT_BSP, SYM_ENT, MO(_FUNC) + ), + + [_SYMBOL] = LAYOUT( + DE_AT, DE_DEG, DE_LBRC, DE_RBRC, DE_HASH, DE_EXLM, DE_LABK, DE_RABK, DE_EQL, DE_AMPR, + DE_BSLS, DE_EURO, DE_LCBR, DE_RCBR, DE_ASTR, DE_QUES, DE_LPRN, DE_RPRN, DE_PLUS, KC_ENT, + XXXXXXX, DE_DLR, DE_PIPE, DE_TILD, DE_GRV, DE_CIRC, DE_PERC, DE_DQUO, DE_QUOT, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_NAVNUM] = LAYOUT( + KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, DE_SS, KC_7, KC_8, KC_9, DE_ADIA, + KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_DOT, KC_4, KC_5, KC_6, DE_ODIA, + XXXXXXX, XXXXXXX, KC_INS, XXXXXXX, XXXXXXX, KC_0, KC_1, KC_2, KC_3, DE_UDIA, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_FUNC] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, DF(_QWERTZ),DF(_ADNW), XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F10, + DM_REC1, DM_RSTP, DM_PLY1, XXXXXXX, QK_RBT, XXXXXXX, KC_F4, KC_F5, KC_F6, KC_F11, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_MOUSE] = LAYOUT( + KC_WH_L, XXXXXXX, KC_MS_U, XXXXXXX, XXXXXXX, KC_ACL0, XXXXXXX, KC_BTN3, XXXXXXX, KC_BTN5, + KC_WH_R, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, KC_ACL1, XXXXXXX, KC_BTN1, KC_BTN2, KC_BTN4, + MOUSE_X, KC_BTN1, KC_BTN3, KC_BTN2, KC_WH_D, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; + +// clang-format on diff --git a/keyboards/frobiac/blackbowl/matrix.c b/keyboards/frobiac/blackbowl/matrix.c new file mode 100644 index 0000000000..727e26ddc1 --- /dev/null +++ b/keyboards/frobiac/blackbowl/matrix.c @@ -0,0 +1,115 @@ +// Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +// Copyright 2017 Erin Call <hello@erincall.com> +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +// This implements a matrix scan (lite) for the BlackBowl keyboard. +// Each side has a dedicated MCP23018 I2C expander. + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include "wait.h" +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "blackbowl.h" +#include "i2c_master.h" +#include "timer.h" + +#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2) +#define ROW_SHIFTER ((matrix_row_t)1) + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); + +static uint8_t expander_reset_loop; +uint8_t expander_status; +const uint8_t expander_input_mask = ((1 << MATRIX_ROWS_PER_SIDE) - 1); // No special mapping, 5 bits [0..4] per side +bool i2c_initialized = false; + +static const uint8_t I2C_ADDR_RIGHT = 0x4E; +static const uint8_t I2C_ADDR_LEFT = 0x46; +static const uint8_t i2c_addr[] = {I2C_ADDR_RIGHT, I2C_ADDR_LEFT}; + +void matrix_init_custom(void) { + if (!i2c_initialized) { + i2c_init(); + wait_ms(1000); + } + + // Pin direction and pull-up depends on diode direction and column register: + // ROW2COL, GPIOA => input, output + uint8_t direction[2] = {0, expander_input_mask}; + uint8_t pullup[2] = {0, expander_input_mask}; + + for (uint8_t i = 0; i < 2; ++i) { + expander_status = i2c_writeReg(i2c_addr[i], IODIRA, direction, 2, I2C_TIMEOUT); + if (expander_status) return; + + expander_status = i2c_writeReg(i2c_addr[i], GPPUA, pullup, 2, I2C_TIMEOUT); + } +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool matrix_has_changed = false; + + if (expander_status) { // if there was an error + ++expander_reset_loop; + if (++expander_reset_loop == 0) { + // since expander_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + matrix_init_custom(); + } + } + + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + matrix_has_changed |= read_rows_on_col(current_matrix, current_col); + } + + return matrix_has_changed; +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + uint8_t port = 0xFF & ~(1 << current_col); + uint8_t column_state[] = {0, 0}; + + // On both expanders: select col and read rows + for (size_t i = 0; i < 2; ++i) { + if (!expander_status) { + expander_status = i2c_writeReg(i2c_addr[i], EXPANDER_COL_REGISTER, &port, 1, I2C_TIMEOUT); + } + wait_us(30); + + if (expander_status) { + return false; + } + + expander_status = i2c_readReg(i2c_addr[i], EXPANDER_ROW_REGISTER, &column_state[i], 1, I2C_TIMEOUT); + column_state[i] = (~column_state[i]) & ((1 << MATRIX_ROWS_PER_SIDE) - 1); + } + + // now map rows 0..4 on each side to cumulative to 0..9 + uint16_t col_state = column_state[0] | ((column_state[1] << MATRIX_ROWS_PER_SIDE) /*& 0x3e0*/); + + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + if (col_state & (1 << current_row)) { + // key closed; set state bit in matrix + current_matrix[current_row] |= (ROW_SHIFTER << current_col); + } else { + // key open; clear state bit in matrix + current_matrix[current_row] &= ~(ROW_SHIFTER << current_col); + } + + // Determine whether the matrix changed state + if ((last_row_value != current_matrix[current_row]) && !(matrix_changed)) { + matrix_changed = true; + } + } + return matrix_changed; +} diff --git a/keyboards/frobiac/blackbowl/readme.md b/keyboards/frobiac/blackbowl/readme.md new file mode 100644 index 0000000000..3150ca2046 --- /dev/null +++ b/keyboards/frobiac/blackbowl/readme.md @@ -0,0 +1,36 @@ +# frobiac/blackbowl + + + +Custom 3D-printed and handwired 36-key split-keyboard with trackpoint developed in 2016. + +* Keyboard Maintainer: [frobiac](https://github.com/frobiac) +* Hardware Supported: Teensy-2.0, IBM Trackpoint, one MCP23018 per side, one RGB-LED +* Development History: [deskthority.net](https://deskthority.net/viewtopic.php?p=344785#p344785) +* Layout [Alpha KLE](http://www.keyboard-layout-editor.com/#/gists/6a6ec84d59fc346effbe894af159eabd) (same as BlackBowl) +* [Original Firmware](https://github.com/frobiac/adnw) + +Make example for this keyboard (after setting up your build environment): + + make frobiac/blackbowl + +Flashing example for this keyboard: + + make frobiac/blackbowl:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +The I2C code is based on the code from 'handwired/dactyl', +but reduced to ROW2COL and EXPANDER_COL_REGISTER=GPIOA define choices. +Adjustments were made for the two I2C addresses, one per side. + + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the Teensy by inserting a small pin in the small hole in the switch plate +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available + + diff --git a/keyboards/frobiac/blackbowl/rules.mk b/keyboards/frobiac/blackbowl/rules.mk new file mode 100644 index 0000000000..6004c37f9e --- /dev/null +++ b/keyboards/frobiac/blackbowl/rules.mk @@ -0,0 +1,9 @@ +CUSTOM_MATRIX = lite + +# project specific files +QUANTUM_LIB_SRC += i2c_master.c +SRC += matrix.c + +PS2_MOUSE_ENABLE = yes +PS2_ENABLE = yes +PS2_DRIVER = usart diff --git a/keyboards/frobiac/blackflat/config.h b/keyboards/frobiac/blackflat/config.h new file mode 100644 index 0000000000..20801757dc --- /dev/null +++ b/keyboards/frobiac/blackflat/config.h @@ -0,0 +1,12 @@ +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#ifdef PS2_MOUSE_ENABLE +# define PS2_DATA_PIN D4 +# define PS2_CLOCK_PIN B3 + +# define PS2_MOUSE_USE_REMOTE_MODE +# define PS2_MOUSE_INIT_DELAY 1000 +#endif diff --git a/keyboards/frobiac/blackflat/info.json b/keyboards/frobiac/blackflat/info.json new file mode 100644 index 0000000000..0d99816582 --- /dev/null +++ b/keyboards/frobiac/blackflat/info.json @@ -0,0 +1,85 @@ +{ + "manufacturer": "frobiac", + "keyboard_name": "blackflat", + "url": "https://www.github.com/frobiac/adnw", + "maintainer": "frobiac", + "bootloader": "halfkay", + "processor": "atmega32u4", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": false, + "bootmagic": false, + "command": false, + "console": false, + "dynamic_macro": true, + "extrakey": true, + "mousekey": true, + "nkro": false, + "unicode": false, + "rgblight": false + }, + "build": { + "lto": true + }, + "matrix_pins": { + "cols": ["F0", "F1", "F4", "F5", "F6"], + "rows": ["B6", "B5", "B4", "F7", "D2", "C6", "C7", "D5"] + }, + "usb": { + "device_version": "1.0.0", + "pid": "0x1D50", + "vid": "0x6033" + }, + "layouts": { + "LAYOUT": { + "layout": [ + {"matrix": [0, 0], "label":"K", "x":0, "y":1.00}, + {"matrix": [0, 1], "label":"U", "x":1, "y":0.50}, + {"matrix": [0, 2], "label":"Q", "x":2, "y":0.00}, + {"matrix": [0, 3], "label":".", "x":3, "y":0.00}, + {"matrix": [0, 4], "label":"J", "x":4, "y":0.00}, + + {"matrix": [4, 0], "label":"P", "x":6, "y":0.00}, + {"matrix": [4, 1], "label":"C", "x":7, "y":0.00}, + {"matrix": [4, 2], "label":"L", "x":8, "y":0.00}, + {"matrix": [4, 3], "label":"M", "x":9, "y":0.50}, + {"matrix": [4, 4], "label":"F", "x":10, "y":1.00}, + + {"matrix": [1, 0], "label":"H", "x":0, "y":2.00}, + {"matrix": [1, 1], "label":"I", "x":1, "y":1.50}, + {"matrix": [1, 2], "label":"E", "x":2, "y":1.00}, + {"matrix": [1, 3], "label":"A", "x":3, "y":1.00}, + {"matrix": [1, 4], "label":"O", "x":4, "y":1.00}, + + {"matrix": [5, 0], "label":"D", "x":6, "y":1.00}, + {"matrix": [5, 1], "label":"T", "x":7, "y":1.00}, + {"matrix": [5, 2], "label":"R", "x":8, "y":1.00}, + {"matrix": [5, 3], "label":"N", "x":9, "y":1.50}, + {"matrix": [5, 4], "label":"S", "x":10, "y":2.00}, + + {"matrix": [2, 0], "label":"X", "x":0, "y":3.00}, + {"matrix": [2, 1], "label":"Y", "x":1, "y":2.50}, + {"matrix": [2, 2], "label":"-", "x":2, "y":2.00}, + {"matrix": [2, 3], "label":",", "x":3, "y":2.00}, + {"matrix": [2, 4], "label":"/", "x":4, "y":2.00}, + + {"matrix": [6, 0], "label":"B", "x":6, "y":2.00}, + {"matrix": [6, 1], "label":"G", "x":7, "y":2.00}, + {"matrix": [6, 2], "label":"W", "x":8, "y":2.00}, + {"matrix": [6, 3], "label":"V", "x":9, "y":2.50}, + {"matrix": [6, 4], "label":"Z", "x":10, "y":3.00}, + + {"matrix": [3, 0], "label":"", "x":0, "y":0.00}, + {"matrix": [3, 2], "label":"Gui", "x":2, "y":3.00}, + {"matrix": [3, 3], "label":"Tab", "x":3, "y":3.00}, + {"matrix": [3, 4], "label":"Spc", "x":4, "y":3.00}, + + {"matrix": [7, 0], "label":"L2", "x":6, "y":3.00}, + {"matrix": [7, 1], "label":"Sh", "x":7, "y":3.00}, + {"matrix": [7, 2], "label":"L3", "x":8, "y":3.00}, + {"matrix": [7, 4], "label":"Fx", "x":10, "y":0.00} + ] + } + } +} diff --git a/keyboards/frobiac/blackflat/keymaps/default/keymap.c b/keyboards/frobiac/blackflat/keymaps/default/keymap.c new file mode 100644 index 0000000000..8cf73b9316 --- /dev/null +++ b/keyboards/frobiac/blackflat/keymaps/default/keymap.c @@ -0,0 +1,85 @@ +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +#include "keymap_german.h" + +enum layer_number { + _ADNW = 0, + _QWERTZ, + _NAVNUM, + _SYMBOL, + _FUNC, + _MOUSE, +}; + +#define CTL_TAB LCTL_T(KC_TAB) +#define ALT_SPC LALT_T(KC_SPC) +#define NAV_ESC LT(_NAVNUM, KC_ESC) +#define SFT_BSP LSFT_T(KC_BSPC) +#define SYM_ENT LT(_SYMBOL, KC_ENT) +#define MOUSE_X LT(_MOUSE, KC_X) +#define MOUSE_Y LT(_MOUSE, KC_Y) + +/* + * ┌───┐ ┌───┬───┬───┐ ┌───┬───┬───┐RST┌───┐ + * │MOU├───┤ Q │ . │ J │ │ P │ C │ L ├───┤Fx │ + * ├───┤ U ├───┼───┼───┤ ├─[TP]──┼───┤ M ├───┤ + * │ K ├───┤ E │ A │ O │ │ D │ T │ R ├───┤ F │ + * ├───┤ I ├───┼───┼───┤ ├───┼───┼───┤ N ├───┤ + * │ H ├───┤ - │ ; │ / │ │ D │ G │ W ├───┤ S │ + * ├───┤ Y ├───┼───┼───┤ ├───┼───┼───┤ V ├───┤ + * │ X ├───┤ │Tab│Spc│ │Esc│Bsp│Ret├───┤ Z │ + * └───┘ └───┴───┴───┘ └───┴───┴───┘ └───┘ + * + */ + +// clang-format off + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_ADNW] = LAYOUT( + KC_K, KC_U, KC_Q, KC_DOT, KC_J, KC_P, KC_C, KC_L, KC_M, KC_F, + KC_H, KC_I, KC_E, KC_A, KC_O, KC_D, KC_T, KC_R, KC_N, KC_S, + MOUSE_X, DE_Y, DE_MINS, KC_COMM, DE_SLSH, KC_B, KC_G, KC_W, KC_V, RSFT_T(DE_Z), + XXXXXXX, KC_LGUI, CTL_TAB, ALT_SPC, NAV_ESC, SFT_BSP, SYM_ENT, MO(_FUNC) + ), + + [_QWERTZ] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + MOUSE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), + XXXXXXX, KC_LGUI, CTL_TAB, ALT_SPC, NAV_ESC, SFT_BSP, SYM_ENT, MO(_FUNC) + ), + + [_SYMBOL] = LAYOUT( + DE_AT, DE_DEG, DE_LBRC, DE_RBRC, DE_HASH, DE_EXLM, DE_LABK, DE_RABK, DE_EQL, DE_AMPR, + DE_BSLS, DE_EURO, DE_LCBR, DE_RCBR, DE_ASTR, DE_QUES, DE_LPRN, DE_RPRN, DE_PLUS, KC_ENT, + XXXXXXX, DE_DLR, DE_PIPE, DE_TILD, DE_GRV, DE_CIRC, DE_PERC, DE_DQUO, DE_QUOT, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_NAVNUM] = LAYOUT( + KC_PGUP, KC_BSPC, KC_UP, KC_DEL, KC_PGDN, DE_SS, KC_7, KC_8, KC_9, DE_ADIA, + KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_DOT, KC_4, KC_5, KC_6, DE_ODIA, + XXXXXXX, XXXXXXX, KC_INS, XXXXXXX, XXXXXXX, KC_0, KC_1, KC_2, KC_3, DE_UDIA, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_FUNC] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, DF(_QWERTZ),DF(_ADNW), XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F10, + DM_REC1, DM_RSTP, DM_PLY1, XXXXXXX, QK_RBT, XXXXXXX, KC_F4, KC_F5, KC_F6, KC_F11, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_MOUSE] = LAYOUT( + KC_WH_L, XXXXXXX, KC_MS_U, XXXXXXX, XXXXXXX, KC_ACL0, XXXXXXX, KC_BTN3, XXXXXXX, KC_BTN5, + KC_WH_R, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, KC_ACL1, XXXXXXX, KC_BTN1, KC_BTN2, KC_BTN4, + MOUSE_X, KC_BTN1, KC_BTN3, KC_BTN2, KC_WH_D, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; + +// clang-format on diff --git a/keyboards/frobiac/blackflat/readme.md b/keyboards/frobiac/blackflat/readme.md new file mode 100644 index 0000000000..1bfba962f1 --- /dev/null +++ b/keyboards/frobiac/blackflat/readme.md @@ -0,0 +1,31 @@ +# frobiac/blackflat + + + +Custom 3D-printed and handwired 36-key split-keyboard with trackpoint developed in 2016. + +* Keyboard Maintainer: [frobiac](https://github.com/frobiac) +* Hardware Supported: Teensy-2.0, IBM Trackpoint +* Development History: [deskthority.net](https://deskthority.net/viewtopic.php?p=339638#p339638) +* Layout [Alpha KLE](http://www.keyboard-layout-editor.com/#/gists/6a6ec84d59fc346effbe894af159eabd) (same as BlackBowl) +* [Original Firmware](https://github.com/frobiac/adnw) + +Make example for this keyboard (after setting up your build environment): + + make frobiac/blackflat + +Flashing example for this keyboard: + + make frobiac/blackflat:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button between left-hand topmost ringfinger key and USB socket +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available + + + diff --git a/keyboards/frobiac/blackflat/rules.mk b/keyboards/frobiac/blackflat/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/frobiac/blackflat/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/frobiac/hypernano/config.h b/keyboards/frobiac/hypernano/config.h new file mode 100644 index 0000000000..843ad6f55b --- /dev/null +++ b/keyboards/frobiac/hypernano/config.h @@ -0,0 +1,17 @@ +// Copyright 2023 @frobiac +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#ifdef PS2_MOUSE_ENABLE +# define PS2_RESET_PIN B0 +# define PS2_DATA_PIN B1 +# define PS2_CLOCK_PIN B2 + +# define PS2_MOUSE_INVERT_X +# define PS2_MOUSE_INVERT_Y + +# define PS2_MOUSE_USE_REMOTE_MODE +# define PS2_MOUSE_INIT_DELAY 1000 +#endif + diff --git a/keyboards/frobiac/hypernano/info.json b/keyboards/frobiac/hypernano/info.json new file mode 100644 index 0000000000..30113e182e --- /dev/null +++ b/keyboards/frobiac/hypernano/info.json @@ -0,0 +1,84 @@ +{ + "manufacturer": "frobiac", + "keyboard_name": "hypernano", + "url": "https://www.github.com/frobiac/adnw", + "maintainer": "frobiac", + "bootloader": "halfkay", + "processor": "atmega32u4", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": false, + "bootmagic": false, + "command": false, + "console": false, + "dynamic_macro": true, + "extrakey": true, + "mousekey": true, + "nkro": false, + "unicode": false, + "rgblight": false + }, + "build": { + "lto": true + }, + "matrix_pins": { + "cols": ["F6", "F5", "F4", "F1", "F0", "F7"], + "rows": ["D7", "D6", "D5", "D4", "D3", "D2", "D1", "D0"] + }, + "usb": { + "device_version": "1.0.0", + "pid": "0x1D50", + "vid": "0x6033" + }, + "layouts": { + "LAYOUT": { + "layout": [ + { "matrix": [0, 0], "label":"K", "x":0, "y":0, "w":1.5}, + { "matrix": [0, 1], "label":"U", "x":1.5, "y":0}, + { "matrix": [0, 2], "label":"Q", "x":2.5, "y":0}, + { "matrix": [0, 3], "label":".", "x":3.5, "y":0}, + { "matrix": [0, 4], "label":"J", "x":4.5, "y":0}, + { "matrix": [1, 1], "label":"P", "x":7.5, "y":0}, + { "matrix": [1, 2], "label":"C", "x":8.5, "y":0}, + { "matrix": [1, 3], "label":"L", "x":9.5, "y":0}, + { "matrix": [1, 4], "label":"M", "x":10.5, "y":0}, + { "matrix": [1, 5], "label":"F", "x":11.5, "y":0, "w":1.5}, + { "matrix": [2, 0], "label":"H", "x":0, "y":1, "w":1.25}, + { "matrix": [2, 1], "label":"I", "x":1.25, "y":1}, + { "matrix": [2, 2], "label":"E", "x":2.25, "y":1}, + { "matrix": [2, 3], "label":"A", "x":3.25, "y":1}, + { "matrix": [2, 4], "label":"O", "x":4.25, "y":1}, + { "matrix": [3, 1], "label":"D", "x":7.75, "y":1}, + { "matrix": [3, 2], "label":"T", "x":8.75, "y":1}, + { "matrix": [3, 3], "label":"R", "x":9.75, "y":1}, + { "matrix": [3, 4], "label":"N", "x":10.75, "y":1}, + { "matrix": [3, 5], "label":"S", "x":11.75, "y":1, "w":1.25}, + { "matrix": [4, 0], "label":"X", "x":0, "y":2}, + { "matrix": [4, 1], "label":"Y", "x":1, "y":2}, + { "matrix": [4, 2], "label":"-", "x":2, "y":2}, + { "matrix": [4, 3], "label":",", "x":3, "y":2}, + { "matrix": [4, 4], "label":"/", "x":4, "y":2}, + { "matrix": [4, 5], "label":"", "x":5, "y":2}, + { "matrix": [5, 0], "label":"", "x":7, "y":2}, + { "matrix": [5, 1], "label":"B", "x":8, "y":2},< |