diff options
Diffstat (limited to 'keyboards/frobiac/blackbowl/readme.md')
| -rw-r--r-- | keyboards/frobiac/blackbowl/readme.md | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/keyboards/frobiac/blackbowl/readme.md b/keyboards/frobiac/blackbowl/readme.md new file mode 100644 index 0000000000..3150ca2046 --- /dev/null +++ b/keyboards/frobiac/blackbowl/readme.md @@ -0,0 +1,36 @@ +# frobiac/blackbowl + + + +Custom 3D-printed and handwired 36-key split-keyboard with trackpoint developed in 2016. + +* Keyboard Maintainer: [frobiac](https://github.com/frobiac) +* Hardware Supported: Teensy-2.0, IBM Trackpoint, one MCP23018 per side, one RGB-LED +* Development History: [deskthority.net](https://deskthority.net/viewtopic.php?p=344785#p344785) +* Layout [Alpha KLE](http://www.keyboard-layout-editor.com/#/gists/6a6ec84d59fc346effbe894af159eabd) (same as BlackBowl) +* [Original Firmware](https://github.com/frobiac/adnw) + +Make example for this keyboard (after setting up your build environment): + + make frobiac/blackbowl + +Flashing example for this keyboard: + + make frobiac/blackbowl:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +The I2C code is based on the code from 'handwired/dactyl', +but reduced to ROW2COL and EXPANDER_COL_REGISTER=GPIOA define choices. +Adjustments were made for the two I2C addresses, one per side. + + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the Teensy by inserting a small pin in the small hole in the switch plate +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available + + |