diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis/3x5/keymaps/drashna')
5 files changed, 131 insertions, 103 deletions
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h index ad549a5e22..514a153623 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h @@ -18,87 +18,90 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#undef PRODUCT -#define PRODUCT "Charybdis Nano (Blackpill)" - -#undef MATRIX_ROW_PINS -#define MATRIX_ROW_PINS \ - { B12, B13, B14, B15 } -#undef MATRIX_COL_PINS -#define MATRIX_COL_PINS \ - { A15, B3, B4, B5, B6 } - - -#undef MATRIX_ROW_PINS_RIGHT -#define MATRIX_ROW_PINS_RIGHT \ - { B12, B13, B14, B15 } -#undef MATRIX_COL_PINS_RIGHT -#define MATRIX_COL_PINS_RIGHT \ - { A15, B3, B4, B5, B6 } - -#define USB_VBUS_PIN B10 -#define SPLIT_HAND_PIN C14 // high = left, low = right +#ifdef KEYBOARD_bastardkb_charybdis_3x5_blackpill + +# undef MATRIX_ROW_PINS +# define MATRIX_ROW_PINS \ + { B12, B13, B14, B15 } +# undef MATRIX_COL_PINS +# define MATRIX_COL_PINS \ + { A15, B3, B4, B5, B6 } + +# undef MATRIX_ROW_PINS_RIGHT +# define MATRIX_ROW_PINS_RIGHT \ + { B12, B13, B14, B15 } +# undef MATRIX_COL_PINS_RIGHT +# define MATRIX_COL_PINS_RIGHT \ + { A15, B3, B4, B5, B6 } + +# define USB_VBUS_PIN B10 +# undef SPLIT_HAND_PIN +# define SPLIT_HAND_PIN C14 // high = left, low = right // WS2812 RGB LED strip input and number of LEDs -#undef RGB_DI_PIN -#define RGB_DI_PIN A1 -#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 -#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 -#define WS2812_PWM_CHANNEL 2 // default: 2 -#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 -#define WS2812_EXTERNAL_PULLUP +# undef RGB_DI_PIN +# define RGB_DI_PIN A1 +# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 +# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +# define WS2812_PWM_CHANNEL 2 // default: 2 +# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_EXTERNAL_PULLUP //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). -#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_PWM_TARGET_PERIOD 800000 +# undef WS2812_DMA_STREAM +# define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_PWM_TARGET_PERIOD 800000 -#define DEBUG_LED_PIN C13 +# define DEBUG_LED_PIN C13 /* Audio config */ -#define AUDIO_PIN B1 -#define AUDIO_PWM_DRIVER PWMD3 -#define AUDIO_PWM_CHANNEL 4 -#define AUDIO_PWM_PAL_MODE 2 +# define AUDIO_PIN B1 +# define AUDIO_PWM_DRIVER PWMD3 +# define AUDIO_PWM_CHANNEL 4 +# define AUDIO_PWM_PAL_MODE 2 /* serial.c configuration for split keyboard */ -#undef SOFT_SERIAL_PIN -#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. -#define SERIAL_USART_TX_PIN A2 -#define SERIAL_USART_RX_PIN A3 -#define SERIAL_USART_DRIVER SD2 -#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 -#define SERIAL_USART_SPEED 921600 +# undef SOFT_SERIAL_PIN +# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +# undef SERIAL_USART_TX_PIN +# define SERIAL_USART_TX_PIN A2 +# undef SERIAL_USART_RX_PIN +# define SERIAL_USART_RX_PIN A3 +# define SERIAL_USART_DRIVER SD2 +# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 +# define SERIAL_USART_SPEED 921600 // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master // To use the highest possible baudrate (3.75Mbit/s) uncomment the following // line, this can result in dropped communications so lower the speed if there // are many timeouts. // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4) -#define CRC8_USE_TABLE -#define CRC8_OPTIMIZE_SPEED +# define CRC8_USE_TABLE +# define CRC8_OPTIMIZE_SPEED /* spi config for eeprom and pmw3360 sensor */ -#define SPI_DRIVER SPID1 -#define SPI_SCK_PIN A5 -#define SPI_SCK_PAL_MODE 5 -#define SPI_MOSI_PIN A7 -#define SPI_MOSI_PAL_MODE 5 -#define SPI_MISO_PIN A6 -#define SPI_MISO_PAL_MODE 5 +# define SPI_DRIVER SPID1 +# define SPI_SCK_PIN A5 +# define SPI_SCK_PAL_MODE 5 +# define SPI_MOSI_PIN A7 +# define SPI_MOSI_PAL_MODE 5 +# define SPI_MISO_PIN A6 +# define SPI_MISO_PAL_MODE 5 /* eeprom config */ -#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 -#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 +# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 +# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 // #define EXTERNAL_EEPROM_PAGE_SIZE 32 // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 /* pmw3360 config */ -#undef PMW33XX_CS_PIN -#define PMW33XX_CS_PIN B0 +# undef PMW33XX_CS_PIN +# define PMW33XX_CS_PIN B0 +#endif #define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 #define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h index bc07c10527..3b254172b4 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/halconf.h @@ -15,11 +15,13 @@ */ #pragma once -#define HAL_USE_PWM TRUE -#define HAL_USE_SERIAL TRUE -#define HAL_USE_I2C TRUE -#define HAL_USE_SPI TRUE -#define SPI_USE_WAIT TRUE -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill) +# define HAL_USE_PWM TRUE +# define HAL_USE_SERIAL TRUE +# define HAL_USE_I2C TRUE +# define HAL_USE_SPI TRUE +# define SPI_USE_WAIT TRUE +# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif #include_next <halconf.h> diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c index a923a80b40..02cb89fe65 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c @@ -83,24 +83,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -void matrix_init_keyemap(void) { setPinInputHigh(A0); } +#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill) +void keyboard_pre_init_keymap(void) { + setPinInputHigh(A0); +} -void matrix_scan_keymap(void) { +void housekeeping_task_keymap(void) { if (!readPin(A0)) { reset_keyboard(); } } -#ifdef USB_VBUS_PIN +# ifdef USB_VBUS_PIN bool usb_vbus_state(void) { setPinInputLow(USB_VBUS_PIN); wait_us(5); return readPin(USB_VBUS_PIN); } -#endif +# endif void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { for (int32_t i = 0; i < 40; i++) { __asm__ volatile("nop" ::: "memory"); } } +#endif diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h index fd71b54b77..9c40967015 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/mcuconf.h @@ -18,25 +18,27 @@ #include_next "mcuconf.h" -#undef STM32_I2C_USE_I2C1 -#define STM32_I2C_USE_I2C1 TRUE +#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill) +# undef STM32_I2C_USE_I2C1 +# define STM32_I2C_USE_I2C1 TRUE // #undef STM32_I2C_I2C1_RX_DMA_STREAM // #define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#undef STM32_I2C_I2C1_TX_DMA_STREAM -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +# undef STM32_I2C_I2C1_TX_DMA_STREAM +# define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#undef STM32_PWM_USE_TIM2 -#define STM32_PWM_USE_TIM2 TRUE +# undef STM32_PWM_USE_TIM2 +# define STM32_PWM_USE_TIM2 TRUE -#undef STM32_PWM_USE_TIM3 -#define STM32_PWM_USE_TIM3 TRUE +# undef STM32_PWM_USE_TIM3 +# define STM32_PWM_USE_TIM3 TRUE -#undef STM32_SPI_USE_SPI1 -#define STM32_SPI_USE_SPI1 TRUE +# undef STM32_SPI_USE_SPI1 +# define STM32_SPI_USE_SPI1 TRUE -#undef STM32_SERIAL_USE_USART2 -#define STM32_SERIAL_USE_USART2 TRUE +# undef STM32_SERIAL_USE_USART2 +# define STM32_SERIAL_USE_USART2 TRUE -#undef STM32_ST_USE_TIMER -#define STM32_ST_USE_TIMER 5 +# undef STM32_ST_USE_TIMER +# define STM32_ST_USE_TIMER 5 +#endif diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk index dc0395c800..ff4ede45ca 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/rules.mk @@ -1,28 +1,45 @@ -# MCU name -MCU = STM32F411 -BOARD = BLACKPILL_STM32_F411 +RGB_MATRIX_ENABLE = no +CUSTOM_UNICODE_ENABLE = no +CUSTOM_POINTING_DEVICE = no +CUSTOM_SPLIT_TRANSPORT_SYNC = no -# Bootloader selection -# BOOTLOADER = stm32-dfu -BOOTLOADER := tinyuf2 -LTO_ENABLE := no +ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/blackpill) + # Bootloader selection + BOOTLOADER := tinyuf2 -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -KEYBOARD_SHARED_EP = yes -MOUSE_SHARED_EP = yes + LTO_ENABLE := no -EEPROM_DRIVER = spi -WS2812_DRIVER = pwm -SERIAL_DRIVER = usart -AUDIO_DRIVER = pwm_hardware + AUDIO_SUPPORTED = yes + AUDIO_ENABLE = yes + AUDIO_DRIVER = pwm_hardware -AUDIO_SUPPORTED = yes -AUDIO_ENABLE = yes -MOUSEKEY_ENABLE = yes -NKRO_ENABLE = yes -CONSOLE_ENABLE = yes + OVERLOAD_FEATURES = yes +endif -AUTOCORRECT_ENABLE = yes +ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/v2/stemcell) + OVERLOAD_FEATURES = yes +endif +ifeq ($(strip $(KEYBOARD)), bastardkb/charybdis/3x5/v2/splinky) + OVERLOAD_FEATURES = yes +endif -DEBOUNCE_TYPE = asym_eager_defer_pk + +ifeq ($(strip $(OVERLOAD_FEATURES)), yes) + BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite + KEYBOARD_SHARED_EP = yes + MOUSE_SHARED_EP = yes + + MOUSEKEY_ENABLE = yes + NKRO_ENABLE = yes + CONSOLE_ENABLE = yes + RGB_MATRIX_ENABLE = yes + + AUTOCORRECT_ENABLE = yes + + CUSTOM_UNICODE_ENABLE = yes + CUSTOM_POINTING_DEVICE = yes + CUSTOM_SPLIT_TRANSPORT_SYNC = yes + + DEBOUNCE_TYPE = asym_eager_defer_pk +endif |