diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h')
| -rw-r--r-- | keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h | 119 |
1 files changed, 61 insertions, 58 deletions
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h index ad549a5e22..514a153623 100644 --- a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h @@ -18,87 +18,90 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#undef PRODUCT -#define PRODUCT "Charybdis Nano (Blackpill)" - -#undef MATRIX_ROW_PINS -#define MATRIX_ROW_PINS \ - { B12, B13, B14, B15 } -#undef MATRIX_COL_PINS -#define MATRIX_COL_PINS \ - { A15, B3, B4, B5, B6 } - - -#undef MATRIX_ROW_PINS_RIGHT -#define MATRIX_ROW_PINS_RIGHT \ - { B12, B13, B14, B15 } -#undef MATRIX_COL_PINS_RIGHT -#define MATRIX_COL_PINS_RIGHT \ - { A15, B3, B4, B5, B6 } - -#define USB_VBUS_PIN B10 -#define SPLIT_HAND_PIN C14 // high = left, low = right +#ifdef KEYBOARD_bastardkb_charybdis_3x5_blackpill + +# undef MATRIX_ROW_PINS +# define MATRIX_ROW_PINS \ + { B12, B13, B14, B15 } +# undef MATRIX_COL_PINS +# define MATRIX_COL_PINS \ + { A15, B3, B4, B5, B6 } + +# undef MATRIX_ROW_PINS_RIGHT +# define MATRIX_ROW_PINS_RIGHT \ + { B12, B13, B14, B15 } +# undef MATRIX_COL_PINS_RIGHT +# define MATRIX_COL_PINS_RIGHT \ + { A15, B3, B4, B5, B6 } + +# define USB_VBUS_PIN B10 +# undef SPLIT_HAND_PIN +# define SPLIT_HAND_PIN C14 // high = left, low = right // WS2812 RGB LED strip input and number of LEDs -#undef RGB_DI_PIN -#define RGB_DI_PIN A1 -#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 -#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 -#define WS2812_PWM_CHANNEL 2 // default: 2 -#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 -#define WS2812_EXTERNAL_PULLUP +# undef RGB_DI_PIN +# define RGB_DI_PIN A1 +# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 +# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +# define WS2812_PWM_CHANNEL 2 // default: 2 +# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_EXTERNAL_PULLUP //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). -#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_PWM_TARGET_PERIOD 800000 +# undef WS2812_DMA_STREAM +# define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_PWM_TARGET_PERIOD 800000 -#define DEBUG_LED_PIN C13 +# define DEBUG_LED_PIN C13 /* Audio config */ -#define AUDIO_PIN B1 -#define AUDIO_PWM_DRIVER PWMD3 -#define AUDIO_PWM_CHANNEL 4 -#define AUDIO_PWM_PAL_MODE 2 +# define AUDIO_PIN B1 +# define AUDIO_PWM_DRIVER PWMD3 +# define AUDIO_PWM_CHANNEL 4 +# define AUDIO_PWM_PAL_MODE 2 /* serial.c configuration for split keyboard */ -#undef SOFT_SERIAL_PIN -#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. -#define SERIAL_USART_TX_PIN A2 -#define SERIAL_USART_RX_PIN A3 -#define SERIAL_USART_DRIVER SD2 -#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 -#define SERIAL_USART_SPEED 921600 +# undef SOFT_SERIAL_PIN +# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +# undef SERIAL_USART_TX_PIN +# define SERIAL_USART_TX_PIN A2 +# undef SERIAL_USART_RX_PIN +# define SERIAL_USART_RX_PIN A3 +# define SERIAL_USART_DRIVER SD2 +# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 +# define SERIAL_USART_SPEED 921600 // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master // To use the highest possible baudrate (3.75Mbit/s) uncomment the following // line, this can result in dropped communications so lower the speed if there // are many timeouts. // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4) -#define CRC8_USE_TABLE -#define CRC8_OPTIMIZE_SPEED +# define CRC8_USE_TABLE +# define CRC8_OPTIMIZE_SPEED /* spi config for eeprom and pmw3360 sensor */ -#define SPI_DRIVER SPID1 -#define SPI_SCK_PIN A5 -#define SPI_SCK_PAL_MODE 5 -#define SPI_MOSI_PIN A7 -#define SPI_MOSI_PAL_MODE 5 -#define SPI_MISO_PIN A6 -#define SPI_MISO_PAL_MODE 5 +# define SPI_DRIVER SPID1 +# define SPI_SCK_PIN A5 +# define SPI_SCK_PAL_MODE 5 +# define SPI_MOSI_PIN A7 +# define SPI_MOSI_PAL_MODE 5 +# define SPI_MISO_PIN A6 +# define SPI_MISO_PAL_MODE 5 /* eeprom config */ -#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 -#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 +# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 +# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 // #define EXTERNAL_EEPROM_PAGE_SIZE 32 // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 /* pmw3360 config */ -#undef PMW33XX_CS_PIN -#define PMW33XX_CS_PIN B0 +# undef PMW33XX_CS_PIN +# define PMW33XX_CS_PIN B0 +#endif #define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 #define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 |