[Keyboard] SplitKB's Zima (#11577)

Co-authored-by: Thomas Baart <thomas@splitkb.com>
Co-authored-by: Joel Challis <git@zvecr.com>

1 files changed, 93 insertions, 0 deletions

diff --git a/keyboards/splitkb/zima/config.h b/keyboards/splitkb/zima/config.h
new file mode 100644
index 0000000000..b39ef73082
--- /dev/null
+++ b/keyboards/splitkb/zima/config.h
@@ -0,0 +1,93 @@
+/*
+Copyright 2019 Thomas Baart
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xF75B
+#define DEVICE_VER 0x0001
+#define MANUFACTURER splitkb
+#define PRODUCT Zima
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ */
+#define DIRECT_PINS { \
+    { C6, D6, D5 }, \
+    { C7, F7, D4 }, \
+    { E6, F5, F6 }, \
+    { F0, F1, F4 } \
+}
+
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { B4 }
+#define ENCODERS_PAD_B { D7 }
+
+// #define QMK_ESC_OUTPUT B7
+// #define QMK_ESC_INPUT C6
+// #define QMK_SPEAKER B6
+
+#define B6_AUDIO
+#define AUDIO_CLICKY
+#define NO_MUSIC_MODE
+
+#define RGB_DI_PIN B5
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_TWINKLE
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+#define FB_ERM_LRA 0
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1    /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* Please refer to your datasheet for the optimal setting for your specific motor. */
+#define RATED_VOLTAGE 3
+#define V_PEAK 5
+
+#define DRV_GREETING alert_750ms
+#define DRV_MODE_DEFAULT buzz
+// EC11K encoders have a different resolution than other EC11 encoders.
+// When using the default resolution of 4, if you notice your encoder skipping
+// every other tick, lower the resolution to 2.
+#define ENCODER_RESOLUTION 2