diff options
| -rw-r--r-- | keyboards/splitkb/zima/config.h | 93 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/info.json | 25 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/keymaps/default/keymap.c | 37 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/keymaps/default/readme.md | 7 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/readme.md | 17 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/rules.mk | 28 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/zima.c | 112 | ||||
| -rw-r--r-- | keyboards/splitkb/zima/zima.h | 29 |
8 files changed, 348 insertions, 0 deletions
diff --git a/keyboards/splitkb/zima/config.h b/keyboards/splitkb/zima/config.h new file mode 100644 index 0000000000..b39ef73082 --- /dev/null +++ b/keyboards/splitkb/zima/config.h @@ -0,0 +1,93 @@ +/* +Copyright 2019 Thomas Baart + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xF75B +#define DEVICE_VER 0x0001 +#define MANUFACTURER splitkb +#define PRODUCT Zima + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 3 + +/* + * Keyboard Matrix Assignments + */ +#define DIRECT_PINS { \ + { C6, D6, D5 }, \ + { C7, F7, D4 }, \ + { E6, F5, F6 }, \ + { F0, F1, F4 } \ +} + +#define UNUSED_PINS + +#define ENCODERS_PAD_A { B4 } +#define ENCODERS_PAD_B { D7 } + +// #define QMK_ESC_OUTPUT B7 +// #define QMK_ESC_INPUT C6 +// #define QMK_SPEAKER B6 + +#define B6_AUDIO +#define AUDIO_CLICKY +#define NO_MUSIC_MODE + +#define RGB_DI_PIN B5 +#define RGBLED_NUM 5 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_TWINKLE + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +// #define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +// #define LOCKING_RESYNC_ENABLE + +#define FB_ERM_LRA 0 +#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ + +/* Please refer to your datasheet for the optimal setting for your specific motor. */ +#define RATED_VOLTAGE 3 +#define V_PEAK 5 + +#define DRV_GREETING alert_750ms +#define DRV_MODE_DEFAULT buzz +// EC11K encoders have a different resolution than other EC11 encoders. +// When using the default resolution of 4, if you notice your encoder skipping +// every other tick, lower the resolution to 2. +#define ENCODER_RESOLUTION 2 diff --git a/keyboards/splitkb/zima/info.json b/keyboards/splitkb/zima/info.json new file mode 100644 index 0000000000..de1a909c30 --- /dev/null +++ b/keyboards/splitkb/zima/info.json @@ -0,0 +1,25 @@ +{ + "keyboard_name": "Zima", + "url": "splitkb.com", + "maintainer": "splitkb.com, drashna", + "width": 3, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x3": { + "layout": [ + {"label":"K00 (B0,B4)", "x":0, "y":1}, + {"label":"K01 (B0,B5)", "x":1, "y":1}, + {"label":"K02 (B0,B6)", "x":2, "y":1}, + {"label":"K10 (B1,B4)", "x":0, "y":2}, + {"label":"K11 (B1,B5)", "x":1, "y":2}, + {"label":"K12 (B1,B6)", "x":2, "y":2}, + {"label":"K20 (B2,B4)", "x":0, "y":3}, + {"label":"K21 (B2,B5)", "x":1, "y":3}, + {"label":"K22 (B2,B6)", "x":2, "y":3}, + {"label":"K30 (B3,B4)", "x":0, "y":4}, + {"label":"K31 (B3,B5)", "x":1, "y":4}, + {"label":"K32 (B3,B6)", "x":2, "y":4} + ] + } + } +} diff --git a/keyboards/splitkb/zima/keymaps/default/keymap.c b/keyboards/splitkb/zima/keymaps/default/keymap.c new file mode 100644 index 0000000000..33483c2938 --- /dev/null +++ b/keyboards/splitkb/zima/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_4x3( /* Base */ + KC_MUTE, TG(1), TG(2), + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, + KC_P1, KC_P2, KC_P3 + ), + [1] = LAYOUT_ortho_4x3( /* Layer 1 */ + RESET, _______, XXXXXXX, + AU_ON, AU_OFF, XXXXXXX, + CK_TOGG, XXXXXXX, CK_UP, + CK_RST, XXXXXXX, CK_DOWN + ), + [2] = LAYOUT_ortho_4x3( /* Layer 2*/ + RGB_TOG, RGB_MOD, _______, + RGB_HUI, RGB_SAI, RGB_VAI, + RGB_HUD, RGB_SAD, RGB_VAD, + HPT_TOG, HPT_FBK, HPT_CONT + ) +}; diff --git a/keyboards/splitkb/zima/keymaps/default/readme.md b/keyboards/splitkb/zima/keymaps/default/readme.md new file mode 100644 index 0000000000..0f78f4bf18 --- /dev/null +++ b/keyboards/splitkb/zima/keymaps/default/readme.md @@ -0,0 +1,7 @@ +# The default keymap for zima + +This includes support for the OLED and Encoder. However, the actual code is found in the `zima.c` file. This can be replaced by adding your own `oled_task_user(void)` and `encoder_update_user` functinons. These will replace what is in the keyboard, and allow you to customize these features. + +The reason that this is done this way, is so that this functionality will work on the [QMK Configurator](https://config.qmk.fm/#/splitkb/zima/LAYOUT_ortho_4x3) + +For reference, the code used for the oled and encoder defaults is in [zima.c](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/zima/zima.c). diff --git a/keyboards/splitkb/zima/readme.md b/keyboards/splitkb/zima/readme.md new file mode 100644 index 0000000000..d974500306 --- /dev/null +++ b/keyboards/splitkb/zima/readme.md @@ -0,0 +1,17 @@ +# Zima + + + +A feature-packed twelve key macropad the size of a creditcard. + +* Keyboard Maintainer: [Thomas Baart](https://github.com/splitkb) +* Hardware Supported: Onboard ATmega32u4 with speaker, encoder, RGB underglow, OLED and haptic support, with a Type C connector +* Hardware Availability: [splitkb.com](https://splitkb.com/collections/keyboard-kits/products/zima) + +Make example for this keyboard (after setting up your build environment): + + make splitkb/zima:default + +Keyboard can be put into bootloader mode by pressing the button to the right of the USB port on the underside of the PCB. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/splitkb/zima/rules.mk b/keyboards/splitkb/zima/rules.mk new file mode 100644 index 0000000000..71c9dc6e8c --- /dev/null +++ b/keyboards/splitkb/zima/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = yes # Audio output + +ENCODER_ENABLE = yes # ENables the use of one or more encoders +OLED_DRIVER_ENABLE = yes # Enables the use of OLED displays +HAPTIC_ENABLE += DRV2605L # Supported but not included by defaut + +LTO_ENABLE = yes diff --git a/keyboards/splitkb/zima/zima.c b/keyboards/splitkb/zima/zima.c new file mode 100644 index 0000000000..3989ebeb29 --- /dev/null +++ b/keyboards/splitkb/zima/zima.c @@ -0,0 +1,112 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "zima.h" +#include <stdio.h> + +#ifdef HAPTIC_ENABLE +# include "haptic.h" +extern haptic_config_t haptic_config; +#endif + +#ifdef OLED_DRIVER_ENABLE +static bool is_asleep = false; +static uint32_t oled_timer; + +void suspend_power_down_kb(void) { + is_asleep = true; + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) { + is_asleep = false; + suspend_wakeup_init_user(); +} + +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } + +__attribute__((weak)) void oled_task_user(void) { + if (is_asleep) { + oled_off(); + return; + } + + if (timer_elapsed32(oled_timer) < 30000) { + oled_on(); + oled_scroll_off(); + oled_write_P(PSTR("SplitKB's Zima"), false); + char layer[2] = {0}; + snprintf(layer, sizeof(layer), "%d", get_highest_layer(layer_state)); + oled_write_P(PSTR(" L:"), false); + oled_write_ln(layer, false); + oled_write_ln_P(PSTR("--------------"), false); + if (rgblight_is_enabled()) { + oled_write_P(PSTR("HSV: "), false); + char rgbs[14]; + snprintf(rgbs, sizeof(rgbs), "%3d, %3d, %3d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); + oled_write_ln(rgbs, false); + } else { + oled_write_ln_P(PSTR("RGB LIGHT DISABLED"), false); + } +# ifdef AUDIO_ENABLE + oled_write_P(PSTR("Audio:"), false); + is_audio_on() ? oled_write_P(PSTR(" on"), false) : oled_write_P(PSTR("off"), false); +# ifdef AUDIO_CLICKY + oled_write_P(PSTR(" Clicky:"), false); + (is_clicky_on() && is_audio_on()) ? oled_write_P(PSTR(" on"), false) : oled_write_P(PSTR("off"), false); +# endif +# endif + } else { + if (timer_elapsed32(oled_timer) < 120000) { + oled_on(); + // clang-format off + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + // clang-format on + oled_write_ln_P(qmk_logo, false); + oled_scroll_right(); + } else { + oled_off(); + } + } +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) { + oled_timer = timer_read32(); + + return process_record_user(keycode, record); +} +#endif + +#ifdef ENCODER_ENABLE +__attribute__((weak)) void encoder_update_user(uint8_t index, bool clockwise) { + if (clockwise) { + tap_code16(KC_VOLU); + } else { + tap_code16(KC_VOLD); + } +# ifdef OLED_DRIVER_ENABLE + oled_timer = timer_read32(); +# endif +# if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY) + if (is_audio_on() && is_clicky_on()) clicky_play(); +# endif +# ifdef HAPTIC_ENABLE + if (haptic_config.enable) haptic_play(); +# endif +} +#endif diff --git a/keyboards/splitkb/zima/zima.h b/keyboards/splitkb/zima/zima.h new file mode 100644 index 0000000000..dc492ef107 --- /dev/null +++ b/keyboards/splitkb/zima/zima.h @@ -0,0 +1,29 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_4x3( \ + k00, k01, k02, \ + k03, k04, k05, \ + k06, k07, k08, \ + k09, k10, k11 \ + ) { \ + {k00, k01, k02}, \ + {k03, k04, k05}, \ + {k06, k07, k08}, \ + {k09, k10, k11} } |