fixes s60_x keyboard

5 files changed, 0 insertions, 88 deletions

diff --git a/keyboards/s60-x/rgb/Makefile b/keyboards/s60-x/rgb/Makefile
deleted file mode 100644
index bd09e5885d..0000000000
--- a/keyboards/s60-x/rgb/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-ifndef MAKEFILE_INCLUDED
-	include ../../../Makefile
-endif
diff --git a/keyboards/s60-x/rgb/config.h b/keyboards/s60-x/rgb/config.h
deleted file mode 100644
index fbc143487e..0000000000
--- a/keyboards/s60-x/rgb/config.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef RBG_CONFIG_H
-#define RBG_CONFIG_H
-
-#include "../config.h"
-
-#define PRODUCT         S60-X-RGB
-#define DESCRIPTION     q.m.k. keyboard firmware for S60-X RGB
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 }
-#define UNUSED_PINS
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN B7
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-#define RGB_DI_PIN F6
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 10
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/rgb/rgb.c b/keyboards/s60-x/rgb/rgb.c
deleted file mode 100644
index 0117e14ae5..0000000000
--- a/keyboards/s60-x/rgb/rgb.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "rgb.h"
diff --git a/keyboards/s60-x/rgb/rgb.h b/keyboards/s60-x/rgb/rgb.h
deleted file mode 100644
index cb7a5f567f..0000000000
--- a/keyboards/s60-x/rgb/rgb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef S60XRGB_H
-#define S60XRGB_H
-
-#include "quantum.h"
-
-#define KEYMAP( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \
-	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314 }, \
-	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  KC_NO }  \
-}
-
-/*This special definition is used for S60-X keymaps that were ported from TMK
- * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
- */
-#define LEGACY_KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
-    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
-) { \
-  { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
-  { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO  }, \
-  { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO  }, \
-  { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
-  { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO  }  \
-}
-
-#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/rgb/rules.mk b/keyboards/s60-x/rgb/rules.mk
deleted file mode 100644
index 6953cc6d6d..0000000000
--- a/keyboards/s60-x/rgb/rules.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes     # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes      # Enable RGB light
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
\ No newline at end of file