Move GMMK Pro to allow for multiple revisions (#16423)

* Added GMMK PRO Rev2 WBG7 MCU compatibility. Added GMMK 2 WBG7 MCU compatibility.

* GMMK PRO MCU Updates only (removed other kbs)

* fix problems

* Optimize the code.

* Update form develop branch

* Update

* Updater from qmk/develop

* Update

* Update config.h

* Update config.h

* Remove gmmk pro rev2

* move moults31/keymap.c

* Update

* tidy up

Co-authored-by: Joy <chang.li@westberrytech.com>
Co-authored-by: zvecr <git@zvecr.com>

4 files changed, 0 insertions, 617 deletions

diff --git a/keyboards/gmmk/pro/ansi/keymaps/macos/config.h b/keyboards/gmmk/pro/ansi/keymaps/macos/config.h
deleted file mode 100644
index 799c5d9593..0000000000
--- a/keyboards/gmmk/pro/ansi/keymaps/macos/config.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Copyright 2021 zvuc <https://github.com/zvuc>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// At the time of this, there are 41 effects! That may be a bit too many to cycle through - keeping what I believe is the best.
-#ifdef RGB_MATRIX_ENABLE
-    #define RGB_DISABLE_TIMEOUT 1200000     // 20 minutes (20 * 60 * 1000ms)
-
-// #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
-
-// Below added per: https://beta.docs.qmk.fm/using-qmk/hardware-features/lighting/feature_rgb_matrix#suspended-state-id-suspended-state
-    #define RGB_DISABLE_WHEN_USB_SUSPENDED
-
-// Effects
-    #define RGB_MATRIX_FRAMEBUFFER_EFFECTS  // Heatmap, Rain
-    #define RGB_MATRIX_KEYPRESSES           // REACTIVE, SPLASH modes
-
-    // Disable effects you don't like.
-    // Soon, you'll have to explicitly enable effects you want: https://github.com/qmk/qmk_firmware/pull/13758
-    // #define DISABLE_RGB_MATRIX_SOLID_COLOR,             // Static single hue, no speed support
-    // #define DISABLE_RGB_MATRIX_ALPHAS_MODS,             // Static dual hue, speed is hue for secondary hue
-    // #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN,        // Static gradient top to bottom, speed controls how much gradient changes
-    // #define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT,     // Static gradient left to right, speed controls how much gradient changes
-    // #define DISABLE_RGB_MATRIX_BREATHING,               // Single hue brightness cycling animation
-    // #define DISABLE_RGB_MATRIX_BAND_SAT,                // Single hue band fading saturation scrolling left to right
-    // #define DISABLE_RGB_MATRIX_BAND_VAL,                // Single hue band fading brightness scrolling left to right
-    // #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT,       // Single hue 3 blade spinning pinwheel fades saturation
-    // #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL,       // Single hue 3 blade spinning pinwheel fades brightness
-    // #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT,         // Single hue spinning spiral fades saturation
-    // #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL,         // Single hue spinning spiral fades brightness
-    // #define DISABLE_RGB_MATRIX_CYCLE_ALL,               // Full keyboard solid hue cycling through full gradient
-    // #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT,        // Full gradient scrolling left to right
-    // #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN,           // Full gradient scrolling top to bottom
-    // #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN,            // Full gradient scrolling out to in
-    // #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL,       // Full dual gradients scrolling out to in
-    // #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON,  // Full gradent Chevron shapped scrolling left to right
-    // #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL,          // Full gradient spinning pinwheel around center of keyboard
-    // #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL,            // Full gradient spinning spiral around center of keyboard
-    // #define DISABLE_RGB_MATRIX_DUAL_BEACON,             // Full gradient spinning around center of keyboard
-    // #define DISABLE_RGB_MATRIX_RAINBOW_BEACON,          // Full tighter gradient spinning around center of keyboard
-    // #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS,       // Full dual gradients spinning two halfs of keyboard
-    // #define DISABLE_RGB_MATRIX_RAINDROPS,               // Randomly changes a single key's hue
-    // #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS,     // Randomly changes a single key's hue and saturation
-    // #define DISABLE_RGB_MATRIX_HUE_BREATHING,           // Hue shifts up a slight ammount at the same time, then shifts back
-    // #define DISABLE_RGB_MATRIX_HUE_PENDULUM,            // Hue shifts up a slight ammount in a wave to the right, then back to the left
-    // #define DISABLE_RGB_MATRIX_HUE_WAVE,                // Hue shifts up a slight ammount and then back down in a wave to the right
-
-    // Framebuffer effects
-    // #define DISABLE_RGB_MATRIX_TYPING_HEATMAP,          // How hot is your WPM!
-    // #define DISABLE_RGB_MATRIX_DIGITAL_RAIN,            // That famous computer simulation
-
-    // Reactive effects
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE,      // Pulses keys hit to hue & value then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE,             // Static single hue, pulses keys hit to shifted hue then fades to current hue
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE         // Hue & value pulse near a single key hit then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE    // Hue & value pulse near multiple key hits then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS        // Hue & value pulse the same column and row of a single key hit then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS   // Hue & value pulse the same column and row of multiple key hits then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS        // Hue & value pulse away on the same column and row of a single key hit then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS   // Hue & value pulse away on the same column and row of multiple key hits then fades value out
-    // #define DISABLE_RGB_MATRIX_SPLASH,                     // Full gradient & value pulse away from a single key hit then fades value out
-    // #define DISABLE_RGB_MATRIX_MULTISPLASH,                // Full gradient & value pulse away from multiple key hits then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_SPLASH,               // Hue & value pulse away from a single key hit then fades value out
-    // #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH,          // Hue & value pulse away from multiple key hits then fades value out
-
-#endif
diff --git a/keyboards/gmmk/pro/ansi/keymaps/macos/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/macos/keymap.c
deleted file mode 100644
index 1f8c47306a..0000000000
--- a/keyboards/gmmk/pro/ansi/keymaps/macos/keymap.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/* Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>
-
-   GMMK Pro Standard keymap for macOS
-   by zvuc <https://github.com/zvuc>
-
-   with code snippets from
-   Andre Brait <andrebrait@gmail.com>, stickandgum
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-enum my_keycodes {
-  KC_MSCTRL = SAFE_RANGE,
-  KC_LNPD,
-  LED_TLDE,
-  LED_1,
-  LED_2,
-  LED_3,
-  LED_4,
-  LED_5,
-  LED_6,
-  LED_7,
-  LED_8,
-  LED_9,
-  LED_0,
-  LED_MINS,
-  LED_EQL
-};
-
-#ifdef RGB_MATRIX_ENABLE
-  #ifndef RGB_CONFIRMATION_BLINKING_TIME
-    #define RGB_CONFIRMATION_BLINKING_TIME 2000 // 2 seconds
-  #endif
-#endif // RGB_MATRIX_ENABLE
-
-// clang-format off
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-//      ESC      F1       F2       F3       F4       F5       F6       F7       F8       F9       F10      F11      F12      Eject          Rotary(Mute)
-//      ~        1        2        3        4        5        6        7        8        9        0         -       (=)      BackSpc           Del
-//      Tab      Q        W        E        R        T        Y        U        I        O        P        [        ]        \                 PgUp
-//      Caps     A        S        D        F        G        H        J        K        L        ;        "                 Enter             PgDn
-//      Sh_L              Z        X        C        V        B        N        M        ,        .        ?                 Sh_R     Up       F13
-//      Ct_L     Opt_L    Cmd_L                               SPACE                               Cmd_R    Opt_R    FN       Left     Down     Right
-
-
-  // The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without
-  // this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB
-  // cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI
-  // if that's your preference.
-  //
-  // To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and
-  // it'll be back to normal when you plug it back in.
-  //
-  // This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO).
-  // Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience.
-  // Press Fn+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts.
-  [0] = LAYOUT(
-    KC_ESC,  KC_BRID, KC_BRIU, KC_MSCTRL,  KC_LNPD, RGB_VAD, RGB_VAI, KC_F7,   KC_F8,   KC_MRWD, KC_MPLY, KC_MFFD, KC_F12,  KC_EJCT,          KC_MUTE,
-    KC_GRV,  KC_1,    KC_2,    KC_3,       KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_DEL,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,       KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
-    KC_CAPS, KC_A,    KC_S,    KC_D,       KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGDN,
-    KC_LSFT,          KC_Z,    KC_X,       KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_UP,   KC_F13,
-    KC_LCTL, KC_LOPT, KC_LCMD,                               KC_SPC,                             KC_RCMD, KC_ROPT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
-  ),
-
-  [1] = LAYOUT(
-    _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12,  _______,           RGB_TOG,
-    LED_TLDE, LED_1,   LED_2,   LED_3,   LED_4,   LED_5,   LED_6,   LED_7,   LED_8,   LED_9,   LED_0,   LED_MINS, LED_EQL, _______,           KC_PSCR,
-    _______,  RGB_HUI, RGB_VAI, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______,  _______, RESET,             _______,
-    _______,  RGB_HUD, RGB_VAD, RGB_SAD, TG(2),   _______, _______, _______, _______, _______, _______, _______,           _______,           _______,
-    _______,           _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______,           _______, RGB_MOD,  RGB_TOG,
-    _______,  _______, _______,                            _______,                            _______, _______,  _______, RGB_SPD, RGB_RMOD, RGB_SPI
-  ),
-
-  // This is an alternative togglable layer to change default function row to standard F keys
-  [2] = LAYOUT(
-    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F24,           _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
-    _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,
-    _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
-  ),
-
-
-};
-// clang-format on
-
-#ifdef ENCODER_ENABLE
-  bool encoder_update_user(uint8_t index, bool clockwise) {
-    // https://beta.docs.qmk.fm/using-qmk/simple-keycodes/feature_advanced_keycodes#alt-escape-for-alt-tab-id-alt-escape-for-alt-tab
-    if (get_mods() & MOD_MASK_CTRL) { // If CTRL is held
-      uint8_t mod_state = get_mods(); // Store all  modifiers that are held
-      unregister_mods(MOD_MASK_CTRL); // Immediately unregister the CRTL key (don't send CTRL-PgDn) - del_mods doesn't work here (not immediate)
-      if (clockwise) {
-        rgblight_increase_hue();
-      } else {
-        rgblight_decrease_hue();
-      }
-      set_mods(mod_state); // Add back in the CTRL key - so ctrl-key will work if ctrl was never released after paging.
-    } else if (get_mods() & MOD_MASK_ALT) {
-      uint8_t mod_state = get_mods();
-      unregister_mods(MOD_MASK_ALT);
-      if (clockwise) {
-        rgblight_increase_sat();
-      } else {
-        rgblight_decrease_sat();
-      }
-      set_mods(mod_state);
-    } else if (get_mods() & MOD_MASK_GUI) {
-      uint8_t mod_state = get_mods();
-      unregister_mods(MOD_MASK_GUI);
-      if (clockwise) {
-        rgblight_increase_val();
-      } else {
-        rgblight_decrease_val();
-      }
-      set_mods(mod_state);
-    } else if (get_mods() & MOD_MASK_SHIFT) {
-      uint8_t mod_state = get_mods();
-      unregister_mods(MOD_MASK_SHIFT);
-      if (clockwise) {
-        rgblight_increase_speed();
-      } else {
-        rgblight_decrease_speed();
-      }
-      set_mods(mod_state);
-    } else if (clockwise) { // All else volume.
-      tap_code(KC_VOLU);
-    } else {
-      tap_code(KC_VOLD);
-    }
-    return true;
-  }
-#endif //ENCODER_ENABLE
-
-#ifdef RGB_MATRIX_ENABLE
-
-  // Called on powerup and is the last _init that is run.
-  void keyboard_post_init_user(void) {
-
-     int mods[35] = {0,2,3,4,5,11,17,33,49,55,65,95,97,79,94,85,93,96,90,69,92,67,76,80,91,75,86,68,77,81,92,28,34,39,44};
-     int j;
-
-     /* output each array element's value */
-     for (j = 0; j < 35; j++ ) {
-        g_led_config.flags[mods[j]] = LED_FLAG_MODIFIER;
-     }
-
-    if (!rgb_matrix_is_enabled()) {
-        rgb_matrix_enable();
-        #ifdef CONSOLE_ENABLE
-          uprintf("ERROR! RGB Matrix Enabled and wrote to EEPROM! -How was the RGB Matrix Disabled?");
-        #endif
-    }
-  }
-
-  /* Renaming those to make the purpose on this keymap clearer */
-  #define LED_FLAG_CAPS LED_FLAG_NONE
-  #define LED_FLAG_EFFECTS LED_FLAG_INDICATOR
-
-  static void set_rgb_caps_leds(void);
-
-  #if RGB_CONFIRMATION_BLINKING_TIME > 0
-    static uint16_t effect_started_time = 0;
-    static uint8_t r_effect = 0x0, g_effect = 0x0, b_effect = 0x0;
-    static void start_effects(void);
-
-    /* The higher this is, the slower the blinking will be */
-    #ifndef TIME_SELECTED_BIT
-      #define TIME_SELECTED_BIT 8
-    #endif
-    #if TIME_SELECTED_BIT < 0 || TIME_SELECTED_BIT >= 16
-      #error "TIME_SELECTED_BIT must be a positive integer smaller than 16"
-    #endif
-    #define effect_red() r_effect = 0xFF, g_effect = 0x0, b_effect = 0x0
-    #define effect_green() r_effect = 0x0, g_effect = 0xFF, b_effect = 0x0
-  #endif // RGB_CONFIRMATION_BLINKING_TIME > 0
-
-  bool led_update_user(led_t led_state) {
-    if (led_state.caps_lock) {
-      if (!rgb_matrix_is_enabled()) {
-        /* Turn ON the RGB Matrix for CAPS LOCK */
-        rgb_matrix_set_flags(LED_FLAG_CAPS);
-        rgb_matrix_enable();
-      }
-    } else if (rgb_matrix_get_flags() == LED_FLAG_CAPS) {
-      /* RGB Matrix was only ON because of CAPS LOCK. Turn it OFF. */
-      rgb_matrix_set_flags(LED_FLAG_ALL);
-      rgb_matrix_disable();
-    }
-    return true;
-  }
-
-  bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    switch (keycode) {
-      // https://github.com/qmk/qmk_firmware/issues/10111
-      case KC_MSCTRL:
-        if (record->event.pressed) {
-          host_consumer_send(0x29F);
-        } else {
-          host_consumer_send(0);
-        }
-        return false; /* Skip all further processing of this key */
-
-      case KC_LNPD:
-        if (record->event.pressed) {
-          host_consumer_send(0x2A0);
-        } else {
-          host_consumer_send(0);
-        }
-        return false; /* Skip all further processing of this key */
-
-      #ifdef NKRO_ENABLE
-        #if RGB_CONFIRMATION_BLINKING_TIME > 0
-          case NK_TOGG:
-            if (record->event.pressed) {
-              if (keymap_config.nkro) {
-                /* Turning NKRO OFF */
-                effect_red();
-              } else {
-                /* Turning NKRO ON */
-                effect_green();
-              }
-              start_effects();
-            }
-            break;
-        #endif // RGB_CONFIRMATION_BLINKING_TIME > 0
-      #endif // NKRO_ENABLE
-
-      #if RGB_CONFIRMATION_BLINKING_TIME > 0
-        case TG(2):
-          if (record->event.pressed) {
-            if (IS_LAYER_OFF(2)) {
-              effect_red();
-            } else {
-              effect_green();
-            }
-            start_effects();
-          }
-          break;
-      #endif // RGB_CONFIRMATION_BLINKING_TIME > 0
-
-      /* LED quick preset keys assignments */
-      case LED_TLDE:
-        rgb_matrix_mode(RGB_MATRIX_SOLID_COLOR);          // Can use RGB_M_P built-in keycode instead.
-        break;
-      case LED_1:
-        rgb_matrix_mode(RGB_MATRIX_ALPHAS_MODS);
-        break;
-      case LED_2:
-        rgb_matrix_mode(RGB_MATRIX_GRADIENT_UP_DOWN);
-        break;
-      case LED_3:
-        rgb_matrix_mode(RGB_MATRIX_JELLYBEAN_RAINDROPS);
-        break;
-      case LED_4:
-        rgb_matrix_mode(RGB_MATRIX_BAND_SAT);
-        break;
-      case LED_5:
-        rgb_matrix_mode(RGB_MATRIX_BAND_VAL);
-        break;
-      case LED_6:
-        rgb_matrix_mode(RGB_MATRIX_BAND_SPIRAL_VAL);
-        break;
-      case LED_7:
-        rgb_matrix_mode(RGB_MATRIX_CYCLE_LEFT_RIGHT);    // Can use RGB_M_R built-in keycode instead.
-        break;
-      case LED_8:
-        rgb_matrix_mode(RGB_MATRIX_CYCLE_PINWHEEL);      // Can use RGB_M_SW built-in keycode instead.
-        break;
-      case LED_9:
-         rgb_matrix_mode(RGB_MATRIX_BREATHING);          // Can use RGB_M_B built-in keycode instead.
-        break;
-
-      #ifdef RGB_MATRIX_KEYPRESSES                         // Reactive effects require RGB_MATRIX_KEYPRESSES in config.h
-        case LED_0:
-          rgb_matrix_mode(RGB_MATRIX_SOLID_REACTIVE_WIDE);
-          break;
-      #endif //RGB_MATRIX_KEYPRESSES
-
-      #ifdef RGB_MATRIX_FRAMEBUFFER_EFFECTS               // Heatmap and Rain require #define RGB_MATRIX_FRAMEBUFFER_EFFECTS in config.h
-        case LED_MINS:
-          rgb_matrix_mode(RGB_MATRIX_DIGITAL_RAIN);
-          break;
-        case LED_EQL:
-          rgb_matrix_mode(RGB_MATRIX_TYPING_HEATMAP);
-          break;
-      #endif //RGB_MATRIX_FRAMEBUFFER_EFFECTS
-
-
-      // case RGB_MOD:
-      // case RGB_RMOD:
-      // case RGB_HUI:
-      // case RGB_HUD:
-      // case RGB_SAI:
-      // case RGB_SAD:
-      // case RGB_VAI:
-      // case RGB_VAD:
-      // case RGB_SPI:
-      case RGB_SPD:
-        if (record->event.pressed) {
-          if (rgb_matrix_get_flags() != LED_FLAG_ALL) {
-            /* Ignore changes to RGB settings while only it's supposed to be OFF */
-            return false;
-          }
-        }
-        break;
-
-      case RGB_TOG:
-        // if (record->event.pressed) {
-        //     if (rgb_matrix_get_flags() == LED_FLAG_ALL) {
-        //         rgb_matrix_set_flags(LED_FLAG_NONE);
-        //         rgb_matrix_set_color_all(0, 0, 0);
-        //     } else {
-        //         rgb_matrix_set_flags(LED_FLAG_ALL);
-        //     }
-        // }
-        // return false;
-        if (record->event.pressed) {
-          if (rgb_matrix_is_enabled()) {
-            switch (rgb_matrix_get_flags()) {
-              #if RGB_CONFIRMATION_BLINKING_TIME > 0
-              case LED_FLAG_EFFECTS:
-              #endif
-              case LED_FLAG_CAPS:
-                /* Turned ON because of EFFECTS or CAPS, is actually OFF */
-                /* Change to LED_FLAG_ALL to signal it's really ON */
-                rgb_matrix_set_flags(LED_FLAG_ALL);
-                /* Will be re-enabled by the processing of the toggle */
-                rgb_matrix_disable_noeeprom();
-                break;
-              case LED_FLAG_ALL:
-                /* Is actually ON */
-                #if RGB_CONFIRMATION_BLINKING_TIME > 0
-                if (effect_started_time > 0) {
-                  /* Signal EFFECTS */
-                  rgb_matrix_set_flags(LED_FLAG_EFFECTS);
-                  /* Will be re-enabled by the processing of the toggle */
-                  rgb_matrix_disable_noeeprom();
-                } else
-                #endif
-                if (host_keyboard_led_state().caps_lock) {
-                  /* Signal CAPS */
-                  rgb_matrix_set_flags(LED_FLAG_CAPS);
-                  /* Will be re-enabled by the processing of the toggle */
-                  rgb_matrix_disable_noeeprom();
-                }
-                break;
-            }
-          }
-        }
-        break;
-
-    }
-    return true;
-  }
-
-
-  void rgb_matrix_indicators_user() {
-    #if RGB_CONFIRMATION_BLINKING_TIME > 0
-    if (effect_started_time > 0) {
-      /* Render blinking EFFECTS */
-      uint16_t deltaTime = sync_timer_elapsed(effect_started_time);
-      if (deltaTime <= RGB_CONFIRMATION_BLINKING_TIME) {
-        uint8_t led_state = ((~deltaTime) >> TIME_SELECTED_BIT) & 0x01;
-        uint8_t val_r = led_state * r_effect;
-        uint8_t val_g = led_state * g_effect;
-        uint8_t val_b = led_state * b_effect;
-        rgb_matrix_set_color_all(val_r, val_g, val_b);
-        if (host_keyboard_led_state().caps_lock) {
-          set_rgb_caps_leds();
-        }
-        return;
-      } else {
-        /* EFFECTS duration is finished */
-        effect_started_time = 0;
-        if (rgb_matrix_get_flags() == LED_FLAG_EFFECTS) {
-          /* It was turned ON because of EFFECTS */
-          if (host_keyboard_led_state().caps_lock) {
-            /* CAPS is still ON. Demote to CAPS */
-            rgb_matrix_set_flags(LED_FLAG_CAPS);
-          } else {
-            /* There is nothing else keeping RGB enabled. Reset flags and turn if off. */
-            rgb_matrix_set_flags(LED_FLAG_ALL);
-            rgb_matrix_disable_noeeprom();
-          }
-        }
-      }
-    }
-    #endif // RGB_CONFIRMATION_BLINKING_TIME > 0
-    if (rgb_matrix_get_flags() == LED_FLAG_CAPS) {
-      rgb_matrix_set_color_all(0x0, 0x0, 0x0);
-    }
-    if (host_keyboard_led_state().caps_lock) {
-      set_rgb_caps_leds();
-    }
-  }
-
-  #if RGB_CONFIRMATION_BLINKING_TIME > 0
-  static void start_effects() {
-    effect_started_time = sync_timer_read();
-    if (!rgb_matrix_is_enabled()) {
-      /* Turn it ON, signal the cause (EFFECTS) */
-      rgb_matrix_set_flags(LED_FLAG_EFFECTS);
-      rgb_matrix_enable_noeeprom();
-    } else if (rgb_matrix_get_flags() == LED_FLAG_CAPS) {
-      /* It's already ON, promote the cause from CAPS to EFFECTS */
-      rgb_matrix_set_flags(LED_FLAG_EFFECTS);
-    }
-  }
-  #endif // RGB_CONFIRMATION_BLINKING_TIME > 0
-
-  static void set_rgb_caps_leds() {
-    rgb_matrix_set_color(67, 0xFF, 0x0, 0x0); // Left side LED 1
-    rgb_matrix_set_color(68, 0xFF, 0x0, 0x0); // Right side LED 1
-    rgb_matrix_set_color(70, 0xFF, 0x0, 0x0); // Left side LED 2
-    rgb_matrix_set_color(71, 0xFF, 0x0, 0x0); // Right side LED 2
-    rgb_matrix_set_color(73, 0xFF, 0x0, 0x0); // Left side LED 3
-    rgb_matrix_set_color(74, 0xFF, 0x0, 0x0); // Right side LED 3
-    rgb_matrix_set_color(76, 0xFF, 0x0, 0x0); // Left side LED 4
-    rgb_matrix_set_color(77, 0xFF, 0x0, 0x0); // Right side LED 4
-    rgb_matrix_set_color(80, 0xFF, 0x0, 0x0); // Left side LED 5
-    rgb_matrix_set_color(81, 0xFF, 0x0, 0x0); // Right side LED 5
-    rgb_matrix_set_color(83, 0xFF, 0x0, 0x0); // Left side LED 6
-    rgb_matrix_set_color(84, 0xFF, 0x0, 0x0); // Right side LED 6
-    rgb_matrix_set_color(87, 0xFF, 0x0, 0x0); // Left side LED 7
-    rgb_matrix_set_color(88, 0xFF, 0x0, 0x0); // Right side LED 7
-    rgb_matrix_set_color(91, 0xFF, 0x0, 0x0); // Left side LED 8
-    rgb_matrix_set_color(92, 0xFF, 0x0, 0x0); // Right side LED 8
-    rgb_matrix_set_color(3, 0xFF, 0x0, 0x0); // CAPS LED
-  }
-
-#endif // RGB_MATRIX_ENABLE
diff --git a/keyboards/gmmk/pro/ansi/keymaps/macos/readme.md b/keyboards/gmmk/pro/ansi/keymaps/macos/readme.md
deleted file mode 100644
index 8024e77cc1..0000000000
--- a/keyboards/gmmk/pro/ansi/keymaps/macos/readme.md
+++ /dev/null
@@ -1,85 +0,0 @@
-# GMMK Pro Standard Layout for macOS by zvuc
-
-As you may know, Glorious does not (yet) provide their Glorious Core software for macOS; so with stock firmware, there aren't any ways to customize layouts on the hardware level unless you turn to software-based override solutions such as [Karabiner Elements](https://karabiner-elements.pqrs.org/). This is my attempt to try to create the most macOS-like experience on the GMMK Pro, taking close notes from Apple's Magic Keyboard, also referencing code from other community keymaps.
-
-## Keymap
-Layer 0
-<img width="1092" alt="Layer0" src="https://user-images.githubusercontent.com/2870726/132235505-64ac1c89-ecf9-49b5-a030-1d94389fc66d.png">
-
-Layer 1 (Hold <kbd>Fn</kbd>)
-<img width="1088" alt="Layer1" src="https://user-images.githubusercontent.com/2870726/133090831-5e84fb69-a8bf-463e-a8f6-f1f38a5901d6.png">
-
-Layer 2 (Togglable alternative function row layout by pressing <kbd>Fn</kbd>+<kbd>F</kbd>)
-<img width="1094" alt="Layer2" src="https://user-images.githubusercontent.com/2870726/133090841-0c6a8b16-bf46-4e6c-b8fa-79f213f95765.png">
-
-
-## Notable differences from stock key layout for Windows:
-- <kbd>Delete</kbd> key placed right next to backspace (under rotary encoder)
-- <kbd>F13</kbd> key for the bottommost row (Assign it to a shortcut you like in macOS preferences! [For example: "Emoji & Symbols" to bring up the emoji input popup instantly](https://user-images.githubusercontent.com/2870726/132237211-7e13c156-96a8-4a91-b215-28d310228feb.png))
-- <kbd>Eject</kbd> key for the last key in function row: Needed for macOS native global "Sleep" hotkey (<kbd>⌘</kbd><kbd>⌥</kbd><kbd>Eject</kbd>)
-
-## Notable Features
-- VIA support
-- Rotary Encoder support (Defaults to stock behavior Volume Up/Down)
-- Standard order for macOS modifier keys: 
-    * Left: <kbd>⌃ Control</kbd><kbd>⌥ Option</kbd><kbd>⌘ Command</kbd> 
-    * Right: <kbd>⌘ Command</kbd><kbd>⌥ Option</kbd><kbd>Fn</kbd>
-- Apple Magic Keyboard-like Function Row Mode (Toggle with <kbd>Fn</kbd>+<kbd>F</kbd>)
-    * <kbd>F1</kbd>: Decrease display brightness
-    * <kbd>F2</kbd>: Increase display brightness
-    * <kbd>F3</kbd>: Mission Control
-    * <kbd>F4</kbd>: Launchpad
-    * <kbd>F5</kbd>: Decrease keyboard backlight brightness
-    * <kbd>F6</kbd>: Increase keyboard backlight brightness
-    * <kbd>F7</kbd>: (none)
-    * <kbd>F8</kbd>: (none)
-    * <kbd>F9</kbd>: Media Rewind 
-    * <kbd>F10</kbd>: Media Play/Pause
-    * <kbd>F11</kbd>: Media Fast Forward
-    * <kbd>F12</kbd>: (none)
-
-> #### NOTE
-> - Media key mappings follow Apple Magic Keyboard except <kbd>F8</kbd> thru <kbd>F12</kbd>, where keys have been shifted by one to the right. It's because I wanted to get over the awkward gap between <kbd>F8</kbd> and <kbd>F9</kbd> that the GMMK Pro has—and also because we don't need dedicated keys for volume control when we have the more convenient rotary knob.
-> - To access standard <kbd>F1</kbd> - <kbd>F12</kbd> keys, press the Function keys while holding <kbd>Fn</kbd>.
-> - If you're planning to use Karabiner Elements, use the standard Function row mode (<kbd>F1</kbd> - <kbd>F12</kbd>) because Karabiner Elements always overrides function keys even if you want to just use simple or complex modifications, and it doesn't catch custom keys like Mission Control, Launchpad or <kbd>Eject</kbd>. (<kbd>Eject</kbd> is mapped as <kbd>F24</kbd> so you can replace it with 'Eject' within Karabiner.)
-
-## RGB Lighting
-- Retains Glorious stock firmware key mappings for control
-    * <kbd>Fn</kbd><kbd>Up</kbd> / <kbd>Fn</kbd><kbd>Down</kbd>: Cycle presets
-    * <kbd>Fn</kbd><kbd>Left</kbd> / <kbd>Fn</kbd><kbd>Right</kbd>: Adjust speed
-    * <kbd>Fn</kbd><kbd>W</kbd> / <kbd>Fn</kbd><kbd>S</kbd>: Adjust brightness
-- Quickly switch to popular presets:
-    * <kbd>Fn</kbd><kbd>`</kbd> : Solid color (no animation)
-    * <kbd>Fn</kbd><kbd>1</kbd> : Solid duotone (no animation) - <kbd>Shift</kbd><kbd>Knob</kbd> to change secondary color.
-    * <kbd>Fn</kbd><kbd>2</kbd> : Vertical gradient - <kbd>Shift</kbd><kbd>Knob</kbd> to change secondary color.
-    * <kbd>Fn</kbd><kbd>3</kbd> : "Jellybean Raindrops"
-    * <kbd>Fn</kbd><kbd>4</kbd> : Horizontal wipe with white backlight
-    * <kbd>Fn</kbd><kbd>5</kbd> : Horizontal wipe
-    * <kbd>Fn</kbd><kbd>6</kbd> : Single color pinwheel
-    * <kbd>Fn</kbd><kbd>7</kbd> : Horizontal rainbow
-    * <kbd>Fn</kbd><kbd>8</kbd> : Rainbow pinwheel
-    * <kbd>Fn</kbd><kbd>9</kbd> : Breathing
-    * <kbd>Fn</kbd><kbd>0</kbd> : Reactive (light up on keypress)
-    * <kbd>Fn</kbd><kbd>-</kbd> : "Digital Rain"
-    * <kbd>Fn</kbd><kbd>=</kbd> : "Heatmap"
-- RGB turns off after 20 minutes of inactivity
-- RGB turns off when USB is suspended / enters sleep
-- <kbd>Caps Lock</kbd> toggle indicator (<kbd>Caps Lock</kbd> key and side lights will turn red)
-- Easy RGB control using Rotary Encoder
-    - <kbd>Control</kbd>+<kbd>Rotate Knob</kbd>: Adjust hue
-    - <kbd>Option</kbd>+<kbd>Rotate Knob</kbd>: Adjust saturation
-    - <kbd>Command</kbd>+<kbd>Rotate Knob</kbd>: Adjust brightness
-
-> All latest QMK effects [(41 as of now)](https://beta.docs.qmk.fm/using-qmk/hardware-features/lighting/feature_rgb_matrix#rgb-matrix-effects-id-rgb-matrix-effects) are enabled by default and will apply in order when cycling through using <kbd>Fn</kbd><kbd>Up</kbd> / <kbd>Fn</kbd><kbd>Down</kbd>. You can disable specific effects by uncommenting (remove the `//` at the beginning of line) respective lines (ex: `#define DISABLE_RGB_MATRIX_BREATHING`) in `qmk_firmware/keyboards/gmmk/pro/ansi/keymaps/zvuc/config.h` then recompiling the firmware.
-
-## Other Features
-- 1000hz polling rate
-- Short DEBOUNCE time (5 ms)
-- Per-key debounce algorithm (`sym_defer_pk`)
-- NKRO toggle (<kbd>Fn</kbd>+<kbd>N</kbd>)
-
-## Warning regarding VIA support
-When observing this keyboard firmware in VIA, some custom-implemented keys such as Mission Control/Launchpad and RGB preset shortcuts appear as keycodes such as `0x5d62`. **These must not be modified!** There is no way to get their default functionality back unless you re-flash the firmware through QMK Toolbox.
-
-## Download pre-compiled firmware binary file
-[Download BIN file from here](https://github.com/zvuc/qmk_firmware/releases/tag/zvuc-1.0.1)
diff --git a/keyboards/gmmk/pro/ansi/keymaps/macos/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/macos/rules.mk
deleted file mode 100644
index e9073d44a0..0000000000
--- a/keyboards/gmmk/pro/ansi/keymaps/macos/rules.mk
+++ /dev/null
@@ -1,4 +0,0 @@
-# Enable additional features.
-
-DEBOUNCE_TYPE = sym_defer_pk
-VIA_ENABLE = yes