summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired/rs60/readme.md
blob: 07c967e276b2bc6a51a548cf54903f4010f8b465 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
# rs60: Handwired Slim Preonic Clone

I wanted a preonic layout but with a very low profile. As Jack is still working on the Preonic PCB for Kailh Choc switches, I figured I could try to handwire one myself. It's my first custom keyboard, so I had a lot to learn.

First I designed the case in fusion 360. I wanted to build it using acrylic, constrained myself to standard acrylic sheet thickness.

![](https://imgur.com/NscS7Rd.jpg)

You can download the model [here](https://a360.co/2OqiKLm).

To test my design I 3D printed the parts.

![](https://imgur.com/MSF7zLS.jpg)

The result was encouraging, so I decided to build a prototype out of the printed plates using Kailh Choc brown switches. I tried to make the handwiring job as flat as possible so it can fit in my design.

![](https://i.imgur.com/67yZx0V.jpg)
![](https://i.imgur.com/ft72Cgj.jpg)

I designed switch plate and the middle plates so that they would be glued together. The middle plate has inserts to attach the bottom plate using m8 screws.

![](https://i.imgur.com/GstTohI.jpg)

The end result is not too bad, but there is a few things I would do differently. Gluing 3D printed plates wasn't a good idea. The switch layer is so thin, that it bends when all the switches are slotted. As a result, the keyboard is not entirely flat. I will replace the bottom plate by a metal one so I get more weight and rigidity.

Even with acrylic, I think I will have the same issue. I might switch to screws + bolts that go all the way through.