summaryrefslogtreecommitdiffstats
path: root/keyboards/gmmk/pro/rev2/iso/readme.md
blob: 7d46370e3a8794f7a62068aa217546625107e967 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
# GMMK PRO (ISO)

A tenkeyless 75% keyboard made and sold by Glorious LLC. Equipped with the WestBerry G7 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info at Glorious](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-iso-black-slate)

* Keyboard Maintainer: [GloriousThrall](https://github.com/GloriousThrall)
* Hardware Supported: GMMK Pro
* Hardware Availability: [GloriousPCGaming.com](https://www.pcgamingrace.com/products/glorious-gmmk-pro-75-barebone-iso-black-slate)

Make example for this keyboard (after setting up your build environment):

    make gmmk/pro/rev2/iso:default

Flashing example for this keyboard:

    make gmmk/pro/rev2/iso:default:flash

To reset the board into bootloader mode, do one of the following:

* Hold the Reset switch mounted on the bottom side of the PCB while connecting the USB cable
* Hold the Escape key while connecting the USB cable (also erases persistent settings)
* Fn+Backspace will reset the board to bootloader mode if you have flashed the default QMK keymap

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Case Screw Replacements

Many users report stripped case screws when disassembling the board.

The stock case screws are:
* Thread: M2
* Thread length: ~5 mm
* Head diameter: ~3.8 mm
* Head counterbore diameter: ~4.0 mm
* Head counterbore depth: ~1.9 mm

Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).