blob: dc7f6f2d30b21e9dda1169955e812b99ff733453 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
# Charybdis (3x5) `via` keymap
The Charydbis (3x5) `via` keymap is based on a QWERTY layout with [home row mods](https://precondition.github.io/home-row-mods) and [Miryoku-inspired layers](https://github.com/manna-harbour/miryoku), and some features and changes specific to the Charybdis.
This layout supports RGB matrix. However, due to space constraints on the MCU, only a limited number of effect can be enabled at once. Look at the `config.h` file and enable your favorite effect.
This layout also supports VIA.
## Customizing the keymap
### Dynamic DPI scaling
Use the following keycodes to change the default DPI:
- `POINTER_DEFAULT_DPI_FORWARD`: increases the DPI; decreases when shifted;
- `POINTER_DEFAULT_DPI_REVERSE`: decreases the DPI; increases when shifted.
There's a maximum of 16 possible values for the sniping mode DPI. See the [Charybdis documentation](../../README.md) for more information.
Use the following keycodes to change the sniping mode DPI:
- `POINTER_SNIPING_DPI_FORWARD`: increases the DPI; decreases when shifted;
- `POINTER_SNIPING_DPI_REVERSE`: decreases the DPI; increases when shifted.
There's a maximum of 4 possible values for the sniping mode DPI. See the [Charybdis documentation](../../README.md) for more information.
### Drag-scroll
Use the `DRAGSCROLL_MODE` keycode to enable drag-scroll on hold. Use the `DRAGSCROLL_TOGGLE` keycode to enable/disable drag-scroll on key press.
### Sniping
Use the `SNIPING_MODE` keycode to enable sniping mode on hold. Use the `SNIPING_TOGGLE` keycode to enable/disable sniping mode on key press.
Change the value of `CHARYBDIS_AUTO_SNIPING_ON_LAYER` to automatically enable sniping mode on layer change. By default, sniping mode is enabled on the pointer layer:
```c
#define CHARYBDIS_AUTO_SNIPING_ON_LAYER LAYER_POINTER
```
### Auto pointer layer
The pointer layer can be automatically enabled when moving the trackball. To enable or disable this behavior, add or remove the following define:
```c
#define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
```
By default, the layer is turned off 1 second after the last registered trackball movement:
```c
#define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
```
The trigger sensibility can also be tuned. The lower the value, the more sensible the trigger:
```c
#define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
```
## Layout
|
