summaryrefslogtreecommitdiffstats
path: root/keyboards/helix/rev2
Commit message (Collapse)AuthorAgeFilesLines
* Reduce SPLIT_USB_TIMEOUT by 500ms (#7637)Joel Challis2020-02-041-4/+8
| | | | | | | | | | * Update SPLIT_USB_TIMEOUT -500ms * Align keyboard level SPLIT_USB_TIMEOUT defaults * Align keyboard level SPLIT_USB_TIMEOUT_POLL * Review fixes
* [Keyboard] Added workaround for serial.c/LTO issue for helix/rev2 and ↵Takeshi ISHII2019-12-071-0/+5
| | | | helix/pico. (#7558)
* Port SPLIT_USB_DETECT to helix/rev2 (#7385)Eric Bunton2019-12-072-25/+60
| | | | | | | | * Port SPLIT_USB_DETECT to helix/rev2 * Remove debug toggles. * Rename is_keyboard_master to has_usb in split_util
* Helix default keymap update (#7465)MakotoKurauchi2019-12-031-31/+58
| | | | | | | | | | | | * add RGBRST key into helix/pico:default keymap ADJUST layer * update helix/rev2:default keymap's OLED display contents * add RGBRST key to HELIX_ROWS == 4 ADJUST layer * add CAPS key to RAISE, LOWER layer * add layer status display on slave side oled * add RGB LED status display on both side oled * save stack memory size
* Remove keymap_config extern from default keymaps (#7399)Drashna Jaelre2019-11-201-1/+0
| | | | | | | | | | * Remove keymap_config extern from default keymaps * Revert unicode Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :( Co-Authored-By: fauxpark <fauxpark@gmail.com>
* [Keyboard] Cleanup helix rules options (#6952)MakotoKurauchi2019-10-1627-891/+356
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
* Remove old promicro_bootloader_jmp() declarations (#6444)fauxpark2019-08-211-4/+0
|
* Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997)Drashna Jaelre2019-06-061-1/+1
|
* [Keymap] Xulkal changes (#6075)XScorpion22019-06-052-0/+80
|
* Cleanup Default Keymaps (#5442)Drashna Jaelre2019-03-191-4/+1
| | | | | | | | * Cleanup Default Keymaps to conform to QMK Firmware standards * Minor fixes * Revert some changes
* Update edvorak keymap simplify (#5350)epaew2019-03-097-228/+87
| | | | | | | | * Update edvorakjp layouts * swap master hand * update tapping_term
* Update Helix 'led_test' keymapmtei2019-02-182-22/+1
| | | | Change to use keyboard_post_init_user() hook (#3113)
* Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154)fauxpark2019-02-173-12/+0
|
* Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152)fauxpark2019-02-161-4/+0
|
* Adds a default value for IS_COMMAND for COMMAND feature (#4301)Drashna Jaelre2019-01-261-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition
* Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)noroadsleft2019-01-046-24/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * Remove QUANTUM_DIR code blocks from keyboard rules This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect entire keyboards. * remove QUANTUM_DIR code blocks from rules for default keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect default keymaps. * remove QUANTUM_DIR code blocks from rules for user keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect "user" keymaps. (It's actually any keymap that isn't named `default`.) * remove QUANTUM_DIR code blocks from rules for community layouts This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for community layouts. * remove QUANTUM_DIR code blocks from rules for userspaces This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for userspaces.
* Keymap: Changed to use LAYOUT_kc() macro instead of LAYOUT() macro for easy ↵Takeshi ISHII2018-12-181-89/+83
| | | | maintenance. (#4676)
* Keymap: Fixed a problem with underglow with froggy keymap (#4580)MakotoKurauchi2018-12-091-5/+25
|
* Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319)Konstantin Đorđević2018-11-276-8/+8
|
* Fix Helix ws2812.c listed more than once warning. (#4499)Takeshi ISHII2018-11-271-1/+0
| | | | Remove `SRC += ws2812.c` from helix/rev2/rules.mk and helix/pico/rules.mk. Because it will be added in common_features.mk.
* Keymap: Refactor edvorakjp user library (#4480)epaew2018-11-265-13/+9
| | | | | | | | | | | | * Refactor edvorakjp user library * add tap dance support * update keymaps * edvorakjp: add SWAP_SCLN option * fix behavior of SWAP_SCLN
* Fix up screen off timer of helix (#4347)comaid2018-11-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | * Fix up screen off timer of helix * Fix Up ScreenOffInterval exceeded uint16_t * Fix Up never waking up once screen off if in case of matrix are not dirty * Changing referenIng incorrect constant name * OLED_ENABLED => SSD1306OLED * Improve internal processing of process_record_kb() * Use the return value of process_record_gfx() * Move a include statement into #ifdef block Move #include "ssd1306.h` statement into #ifdef block * Move process_record_kbI() Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c * Move process_record_kb()
* Helix serial.c re-adjust compiler depend value of delay (#4269)Takeshi ISHII2018-10-281-3/+0
| | | | | | | | | | | | * Helix serial.c add debug code * re-adjust READ_WRITE_WIDTH_ADJUST values * re-adjust READ_WRITE_START_ADJUST values * re-adjust TID_SEND_ADJUST value * Helix serial.c: remove debug code
* Remove all of the deprecated RGB definesDrashna Jaelre2018-10-221-3/+1
| | | | Fixes #3641
* Replace outdated RGB/Audio informationDrashna Jaelre2018-10-227-7/+7
|
* Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)Takeshi ISHII2018-10-223-28/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * helix/serial.c add support PD1,PD3,PE6 and configuration simplify * Add comment about ATmega32U4 I2C * Add compile time check for ATmega32U4 I2C * change TAB code to 8 SPACE code * Helix serial.c PORTD,PD0 test. OK OK PD0 - PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD1 test. OK OK PD0 OK PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD3 test. OK OK PD0 OK PD1 OK PD2 OK PD3 - PE6 * Helix serial.c PORTE,PD6 test. OK OK PD0 OK PD1 OK PD2 OK PD3 OK PE6 * Helix serial.c: PD0,PD1,PD3,PE6 all test end * Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN * Helix serial.c add debug code * Helix serial.c: add transaction ID range check * Helix serial.c debug code update * Helix serial.c debug code update * Helix serial.c: Strict checking of the value of tid. * adjust the delay of serial.c * Helix serial.c: remove debug code * remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk tmk_core/common.mk has >ifeq ($(strip $(CONSOLE_ENABLE)), yes) > TMK_COMMON_DEFS += -DCONSOLE_ENABLE * Fix error handling in split_scomm.c * add some comment to serial.c * add some comment about SELECT_SOFT_SERIAL_SPEED
* Keymaps: Helix rgblight mode update (#4091)MakotoKurauchi2018-10-1014-28/+91
| | | | | | | | | | | | | | | | | | * Helix each keymap's using rgblight mode symbol instead magic number No change in build result. * Helix pico keymaps: make rgblight modes selectable. No change in build result. * Helix rev2 keymaps: make rgblight modes selectable. No change in build result. * fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT) * Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
* Keyboard: Helix five_rows keymap reduced size (#4082)Takeshi ISHII2018-10-055-44/+112
| | | | | | | | | | | | | | | | * add PERMISSIVE_HOLD in helix:five_rows/config.h * add Eucalyn char layout into helix:five_rows * Helix five_rows keymap: make rgblight modes selectable. No change in build result. * fix keymap.c map comment, add console compile option No change in build result. * Helix five_rows keymap: reduced the size.
* Helix led_test keymap reduce size (#4023)Takeshi ISHII2018-09-293-6/+16
| | | | | | | | | | * Helix: make rgblight modes selectable. No change in build result. * edit the comment of helix/rev2/keymaps/default/keymap.c * Helix led_test keymap: reduced the size.
* Keymap: Fixed a possible of buffer overflow. (#4016)marksard2018-09-291-11/+13
| | | | Update inline funnction to static inline function. Fixed error of if enabe ADJUST_MACRO_ENABLE.
* Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson2018-09-171-1/+0
| | | | | | | | | | * Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* Keymap: remove unnecessary readme from my helix keymap (#3860)Yasuhiro Shimizu2018-09-091-25/+0
|
* Keymap: add yshrsmz keymaps (#3770)Yasuhiro Shimizu2018-09-014-0/+727
| | | | | | | | | | | | | | | * add ergo42 keymap * add helix keymap * add keymap for lets_split * Add keymap for nyquist * update keymaps to address review comments - remove unneeded include - use `#pragma once`
* Keymap: Helix : Update froggy keymap (#3652)MakotoKurauchi2018-08-151-21/+101
| | | | | | * led ripple effect * fix key name
* Keyboard: Helix serial improvements (#3608)MakotoKurauchi2018-08-1013-30/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add change_reciver2sender()/change_sender2reciver() This is a change to improve readability. * txled, rxled off in matrix_init() * add serial_send_packet() / serial_recive_packet() This is a change to reduce object size. * add serial_low() at ISR() top * add __attribute__((always_inline)) to some functions * modify serial_send_packet()/serial_recive_packet() A little, object size reduction. A little, speedup. * add debug code to helix/serial.c * Adjust sampling timing of serial signal being received * add split_scomm.c/split_scomm.h and change serial.c/serial.h serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. * add split_scomm.c/split_scomm.h into helix/rev1 * reduce object size helix/rev2/matrix.c * remove checksum check, add parity check * force occur parity error for test * parity test ok. remove test code * change some comment & add skip code when buffer_size == 0 * serial.c: multiple types of transaction support Add 4 bits transaction-type field at packet top. Select Transaction Descriptor Table entry by transaction-type. * helix serial master-slave transaction optimize Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized. * add debug code for retry * add comment into each config.h * fix ISR status drop * add a debug macro 'debug_retry_chg()' * reduce led_test size * remove debug code from helix/serial.c and etc. * helix:five_rows change TAPPING_TERM value 140 * Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement. - The difference with the original let's split's serial.c - It's high-speed about 4 times. - Stable bi-directional data transfer. (Helix need master to slave transfer) - serial.h was divided 2 files, serial_config.h and sereial.h - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API) - USE OLD Simple APIs (compatible with let's split serial.c) - files : - serial_config.h -- hardware configuration (need include by config.h) - serial.c/serial.h -- serial communication - USE NEW flexible APIs. (Support multi-type transaction function.) serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. - files - split_scomm.c -- communication buffer is defined in here. call by matrix.c. - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c - serial_config.h -- hardware configuration (need include by config.h) To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION - serial.c/serial.h -- serial communication lower layer - NEW APIs for serial.c / serial.h (The lower layer) // Soft Serial Transaction Descriptor typedef struct _SSTD_t { uint8_t *status; uint8_t initiator2target_buffer_size; uint8_t *initiator2target_buffer; uint8_t target2initiator_buffer_size; uint8_t *target2initiator_buffer; } SSTD_t; // initiator is transaction start side void soft_serial_initiator_init(SSTD_t *sstd_table); // target is interrupt accept side void soft_serial_target_init(SSTD_t *sstd_table); int soft_serial_transaction(int sstd_index); int soft_serial_get_and_clean_target_status(int sstd_index); - NEW APIs for split_scomm.c / split_scomm.h (The upper layer) move from old serial.c the following buffer and functions serial_slave_buffer[] serial_master_buffer[] void serial_master_init(void) void serial_slave_init(void) int serial_update_buffers(void) define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
* Keymap: refactoring and modifief to helix five rows jis (#3552)marksard2018-08-021-189/+95
| | | | | | * display of LED mode * refactoring * modified a keymap * use extra jp header
* Keyboard: fixed build break (size overflow) HelixPico with Backlight or ↵Takeshi ISHII2018-08-026-0/+30
| | | | | | | | | | | | Underglow (#3546) * build break fix for HelixPico * add customize variable 'Link_Time_Optimization' into rev2 and pico keymaps rules.mk * "CFLAGS += -flto" change to "EXTRAFLAGS += -flto" * add USE_Link_Time_Optimization macro
* Keymap: Refactor helix keymap based on changes to default keymap (#3469)marksard2018-07-233-113/+19
|
* Keymap: Modified of 'Helix five rows JIS" keymap (#3425)marksard2018-07-164-152/+167
| | | | | | * Change key layout in raise-layer. * Improvement update cycle to mouse key changes. * Update the readme.md
* Helix config refine (#3374)MakotoKurauchi2018-07-1210-19/+16
| | | | | | * helix config.h refine
* Add edvorakjp keymap for the Helix (rev2) keyboard (#3340)epaew2018-07-089-0/+544
| | | | | | | | | | | | | | | | * add readme.md * add extern declaration of edvorakjp_config to edvorakjp.h * add oled.c * add layout definitions * add keymap.c * add rules.mk * fix rgblight issue: rgblight_setrgb() ignore RGBLIGHT_LIMIT_VAL
* Helix: Move definition of LAYOUT_kc to each revision. (#3333)epaew2018-07-071-34/+65
|
* defaulted to 5 rows when HELIX_ROWS is not defined (#3312)MakotoKurauchi2018-07-041-3/+1
|
* Update Helix 'led_test' keymap (#3292)Takeshi ISHII2018-07-036-1547/+30
| | | | | | | | * now helix led_test local rgblight.[ch] not use. remove. * greatly simplify keyboards/helix/rev2/keymaps/led_test/keymap.c Helix keymap 'led_test' use modified default/keymap.c
* Helix five rows jis (#3274)marksard2018-07-015-0/+1111
| | | | | | | * Added keymap for Helix like Japanese JIS keyboard. * * Refactored * Supported to display of exchange layer
* Helix fix configrator problem (#3270)MakotoKurauchi2018-06-302-12/+10
| | | | | | * Fix problem with configrator * Edit keyboard info
* Helix shrink config (#3268)MakotoKurauchi2018-06-307-371/+207
| | | | | | | | | | | | | | | | | | | | | | | | |