diff options
Diffstat (limited to 'tmk_core/protocol/pjrc')
-rw-r--r-- | tmk_core/protocol/pjrc/MEMO.txt | 25 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/main.c | 72 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/pjrc.c | 76 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/pjrc.h | 26 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb.c | 1002 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb.h | 137 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_debug.c | 102 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_debug.h | 42 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_extra.c | 70 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_extra.h | 46 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_keyboard.c | 110 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_keyboard.h | 40 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_mouse.c | 81 | ||||
-rw-r--r-- | tmk_core/protocol/pjrc/usb_mouse.h | 50 |
14 files changed, 1879 insertions, 0 deletions
diff --git a/tmk_core/protocol/pjrc/MEMO.txt b/tmk_core/protocol/pjrc/MEMO.txt new file mode 100644 index 0000000000..b0f0598313 --- /dev/null +++ b/tmk_core/protocol/pjrc/MEMO.txt @@ -0,0 +1,25 @@ +Endpoint configuration +---------------------- +0 Control endpoint +1 keyboard +2 mouse +3 debug +4 extra key(consumer/system) +5 nkro keyboard(supported only on ATmega32U4/16U4 and AT90USB64/128) + + +ATmega32U4/16U4, AT90USB64/128 +• Endpoint 0:programmable size FIFO up to 64 bytes, default control endpoint +• Endpoints 1 programmable size FIFO up to 256 bytes in ping-pong mode. +• Endpoints 2 to 6: programmable size FIFO up to 64 bytes in ping-pong mode. + +AT90USB82/162, ATmega8U2/16U2/32U2 +• Endpoint 0:programmable size FIFO up to 64 bytes, default control endpoint +• Endpoints 1 and 2: programmable size FIFO up to 64 bytes. +• Endpoints 3 and 4: programmable size FIFO up to 64 bytes with ping-pong mode. + +ping-pong mode means double buffer feature. + + +NOTE: ATmega8U2/16U2/32U2 is not supported with PJRC stack at this time. +TODO: Macro definition for ATmega8U2/16U2/32U2 in usb.h diff --git a/tmk_core/protocol/pjrc/main.c b/tmk_core/protocol/pjrc/main.c new file mode 100644 index 0000000000..e7bdcc059a --- /dev/null +++ b/tmk_core/protocol/pjrc/main.c @@ -0,0 +1,72 @@ +/* Keyboard example with debug channel, for Teensy USB Development Board + * http://www.pjrc.com/teensy/usb_keyboard.html + * Copyright (c) 2008 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <avr/wdt.h> +#include <util/delay.h> +#include "keyboard.h" +#include "usb.h" +#include "matrix.h" +#include "print.h" +#include "debug.h" +#include "sendchar.h" +#include "util.h" +#include "suspend.h" +#include "host.h" +#include "pjrc.h" + + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) + + +int main(void) +{ + // set for 16 MHz clock + CPU_PRESCALE(0); + + // Initialize the USB, and then wait for the host to set configuration. + // If the Teensy is powered without a PC connected to the USB port, + // this will wait forever. + usb_init(); + while (!usb_configured()) /* wait */ ; + + print_set_sendchar(sendchar); + + keyboard_init(); + host_set_driver(pjrc_driver()); +#ifdef SLEEP_LED_ENABLE + sleep_led_init(); +#endif + while (1) { + while (suspend) { + suspend_power_down(); + if (remote_wakeup && suspend_wakeup_condition()) { + usb_remote_wakeup(); + } + } + + keyboard_task(); + } +} diff --git a/tmk_core/protocol/pjrc/pjrc.c b/tmk_core/protocol/pjrc/pjrc.c new file mode 100644 index 0000000000..0562a12ffa --- /dev/null +++ b/tmk_core/protocol/pjrc/pjrc.c @@ -0,0 +1,76 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include "usb_keyboard.h" +#include "usb_mouse.h" +#include "usb_extra.h" +#include "host_driver.h" +#include "pjrc.h" + + +/*------------------------------------------------------------------* + * Host driver + *------------------------------------------------------------------*/ +static uint8_t keyboard_leds(void); +static void send_keyboard(report_keyboard_t *report); +static void send_mouse(report_mouse_t *report); +static void send_system(uint16_t data); +static void send_consumer(uint16_t data); + +static host_driver_t driver = { + keyboard_leds, + send_keyboard, + send_mouse, + send_system, + send_consumer +}; + +host_driver_t *pjrc_driver(void) +{ + return &driver; +} + +static uint8_t keyboard_leds(void) { + return usb_keyboard_leds; +} + +static void send_keyboard(report_keyboard_t *report) +{ + usb_keyboard_send_report(report); +} + +static void send_mouse(report_mouse_t *report) +{ +#ifdef MOUSE_ENABLE + usb_mouse_send(report->x, report->y, report->v, report->h, report->buttons); +#endif +} + +static void send_system(uint16_t data) +{ +#ifdef EXTRAKEY_ENABLE + usb_extra_system_send(data); +#endif +} + +static void send_consumer(uint16_t data) +{ +#ifdef EXTRAKEY_ENABLE + usb_extra_consumer_send(data); +#endif +} diff --git a/tmk_core/protocol/pjrc/pjrc.h b/tmk_core/protocol/pjrc/pjrc.h new file mode 100644 index 0000000000..06e79626fc --- /dev/null +++ b/tmk_core/protocol/pjrc/pjrc.h @@ -0,0 +1,26 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef PJRC_H +#define PJRC_H + +#include "host_driver.h" + + +host_driver_t *pjrc_driver(void); + +#endif diff --git a/tmk_core/protocol/pjrc/usb.c b/tmk_core/protocol/pjrc/usb.c new file mode 100644 index 0000000000..1e6ba8719a --- /dev/null +++ b/tmk_core/protocol/pjrc/usb.c @@ -0,0 +1,1002 @@ +/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board + * http://www.pjrc.com/teensy/usb_keyboard.html + * Copyright (c) 2009 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <avr/interrupt.h> +#include "usb.h" +#include "usb_keyboard.h" +#include "usb_mouse.h" +#include "usb_debug.h" +#include "usb_extra.h" +#include "led.h" +#include "print.h" +#include "util.h" +#ifdef SLEEP_LED_ENABLE +#include "sleep_led.h" +#endif +#include "suspend.h" +#include "action.h" +#include "action_util.h" + + +/************************************************************************** + * + * Configurable Options + * + **************************************************************************/ + +// You can change these to give your code its own name. +#ifndef MANUFACTURER +# define STR_MANUFACTURER L"t.m.k." +#else +# define STR_MANUFACTURER LSTR(MANUFACTURER) +#endif +#ifndef PRODUCT +# define STR_PRODUCT L"t.m.k. keyboard" +#else +# define STR_PRODUCT LSTR(PRODUCT) +#endif + + +// Mac OS-X and Linux automatically load the correct drivers. On +// Windows, even though the driver is supplied by Microsoft, an +// INF file is needed to load the driver. These numbers need to +// match the INF file. +#ifndef VENDOR_ID +# define VENDOR_ID 0xFEED +#endif + +#ifndef PRODUCT_ID +# define PRODUCT_ID 0xBABE +#endif + +#ifndef DEVICE_VER +# define DEVICE_VER 0x0100 +#endif + + +// USB devices are supposed to implment a halt feature, which is +// rarely (if ever) used. If you comment this line out, the halt +// code will be removed, saving 102 bytes of space (gcc 4.3.0). +// This is not strictly USB compliant, but works with all major +// operating systems. +#define SUPPORT_ENDPOINT_HALT + + + +/************************************************************************** + * + * Endpoint Buffer Configuration + * + **************************************************************************/ + +#define ENDPOINT0_SIZE 32 + +bool remote_wakeup = false; +bool suspend = false; + +// 0:control endpoint is enabled automatically by controller. +static const uint8_t PROGMEM endpoint_config_table[] = { + // enable, UECFG0X(type, direction), UECFG1X(size, bank, allocation) + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KBD_SIZE) | KBD_BUFFER, // 1 +#ifdef MOUSE_ENABLE + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(MOUSE_SIZE) | MOUSE_BUFFER, // 2 +#else + 0, // 2 +#endif +#ifdef CONSOLE_ENABLE + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER, // 3 +#else + 0, +#endif +#ifdef EXTRAKEY_ENABLE + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(EXTRA_SIZE) | EXTRA_BUFFER, // 4 +#else + 0, // 4 +#endif +#ifdef NKRO_ENABLE + 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KBD2_SIZE) | KBD2_BUFFER, // 5 +#else + 0, // 5 +#endif + 0, // 6 +}; + + +/************************************************************************** + * + * Descriptor Data + * + **************************************************************************/ + +// Descriptors are the data that your computer reads when it auto-detects +// this USB device (called "enumeration" in USB lingo). The most commonly +// changed items are editable at the top of this file. Changing things +// in here should only be done by those who've read chapter 9 of the USB +// spec and relevant portions of any USB class specifications! + + +static const uint8_t PROGMEM device_descriptor[] = { + 18, // bLength + 1, // bDescriptorType + 0x00, 0x02, // bcdUSB + 0, // bDeviceClass + 0, // bDeviceSubClass + 0, // bDeviceProtocol + ENDPOINT0_SIZE, // bMaxPacketSize0 + LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor + LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct + LSB(DEVICE_VER), MSB(DEVICE_VER), // bcdDevice + 1, // iManufacturer + 2, // iProduct + 0, // iSerialNumber + 1 // bNumConfigurations +}; + +// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60 +static const uint8_t PROGMEM keyboard_hid_report_desc[] = { + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application), + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte + 0x95, 0x01, // Report Count (1), + 0x75, 0x08, // Report Size (8), + 0x81, 0x03, // Input (Constant), ;Reserved byte + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x91, 0x03, // Output (Constant), ;LED report padding + 0x95, KBD_REPORT_KEYS, // Report Count (), + 0x75, 0x08, // Report Size (8), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0xFF, // Logical Maximum(255), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, 0xFF, // Usage Maximum (255), + 0x81, 0x00, // Input (Data, Array), + 0xc0 // End Collection +}; +#ifdef NKRO_ENABLE +static const uint8_t PROGMEM keyboard2_hid_report_desc[] = { + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application), + // bitmap of modifiers + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte + // LED output report + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x91, 0x03, // Output (Constant), + // bitmap of keys + 0x95, KBD2_REPORT_KEYS*8, // Report Count (), + 0x75, 0x01, // Report Size (1), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum(1), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, KBD2_REPORT_KEYS*8-1, // Usage Maximum (), + 0x81, 0x02, // Input (Data, Variable, Absolute), + 0xc0 // End Collection +}; +#endif + +#ifdef MOUSE_ENABLE +// Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension +// http://www.microchip.com/forums/tm.aspx?high=&m=391435&mpage=1#391521 +// http://www.keil.com/forum/15671/ +// http://www.microsoft.com/whdc/device/input/wheel.mspx +static const uint8_t PROGMEM mouse_hid_report_desc[] = { + /* mouse */ + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) + 0x09, 0x02, // USAGE (Mouse) + 0xa1, 0x01, // COLLECTION (Application) + //0x85, REPORT_ID_MOUSE, // REPORT_ID (1) + 0x09, 0x01, // USAGE (Pointer) + 0xa1, 0x00, // COLLECTION (Physical) + // ---------------------------- Buttons + 0x05, 0x09, // USAGE_PAGE (Button) + 0x19, 0x01, // USAGE_MINIMUM (Button 1) + 0x29, 0x05, // USAGE_MAXIMUM (Button 5) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x01, // LOGICAL_MAXIMUM (1) + 0x75, 0x01, // REPORT_SIZE (1) + 0x95, 0x05, // REPORT_COUNT (5) + 0x81, 0x02, // INPUT (Data,Var,Abs) + 0x75, 0x03, // REPORT_SIZE (3) + 0x95, 0x01, // REPORT_COUNT (1) + 0x81, 0x03, // INPUT (Cnst,Var,Abs) + // ---------------------------- X,Y position + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) + 0x09, 0x30, // USAGE (X) + 0x09, 0x31, // USAGE (Y) + 0x15, 0x81, // LOGICAL_MINIMUM (-127) + 0x25, 0x7f, // LOGICAL_MAXIMUM (127) + 0x75, 0x08, // REPORT_SIZE (8) + 0x95, 0x02, // REPORT_COUNT (2) + 0x81, 0x06, // INPUT (Data,Var,Rel) + // ---------------------------- Vertical wheel + 0x09, 0x38, // USAGE (Wheel) + 0x15, 0x81, // LOGICAL_MINIMUM (-127) + 0x25, 0x7f, // LOGICAL_MAXIMUM (127) + 0x35, 0x00, // PHYSICAL_MINIMUM (0) - reset physical + 0x45, 0x00, // PHYSICAL_MAXIMUM (0) + 0x75, 0x08, // REPORT_SIZE (8) + 0x95, 0x01, // REPORT_COUNT (1) + 0x81, 0x06, // INPUT (Data,Var,Rel) + // ---------------------------- Horizontal wheel + 0x05, 0x0c, // USAGE_PAGE (Consumer Devices) + 0x0a, 0x38, 0x02, // USAGE (AC Pan) + 0x15, 0x81, // LOGICAL_MINIMUM (-127) + 0x25, 0x7f, // LOGICAL_MAXIMUM (127) + 0x75, 0x08, // REPORT_SIZE (8) + 0x95, 0x01, // REPORT_COUNT (1) + 0x81, 0x06, // INPUT (Data,Var,Rel) + 0xc0, // END_COLLECTION + 0xc0, // END_COLLECTION +}; +#endif + +static const uint8_t PROGMEM debug_hid_report_desc[] = { + 0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined) + 0x09, 0x74, // Usage 0x74 + 0xA1, 0x53, // Collection 0x53 + 0x75, 0x08, // report size = 8 bits + 0x15, 0x00, // logical minimum = 0 + 0x26, 0xFF, 0x00, // logical maximum = 255 + 0x95, DEBUG_TX_SIZE, // report count + 0x09, 0x75, // usage + 0x81, 0x02, // Input (array) + 0xC0 // end collection +}; + +#ifdef EXTRAKEY_ENABLE +// audio controls & system controls +// http://www.microsoft.com/whdc/archive/w2kbd.mspx +static const uint8_t PROGMEM extra_hid_report_desc[] = { + /* system control */ + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) + 0x09, 0x80, // USAGE (System Control) + 0xa1, 0x01, // COLLECTION (Application) + 0x85, REPORT_ID_SYSTEM, // REPORT_ID (2) + 0x15, 0x01, // LOGICAL_MINIMUM (0x1) + 0x25, 0xb7, // LOGICAL_MAXIMUM (0xb7) + 0x19, 0x01, // USAGE_MINIMUM (0x1) + 0x29, 0xb7, // USAGE_MAXIMUM (0xb7) + 0x75, 0x10, // REPORT_SIZE (16) + 0x95, 0x01, // REPORT_COUNT (1) + 0x81, 0x00, // INPUT (Data,Array,Abs) + 0xc0, // END_COLLECTION + /* consumer */ + 0x05, 0x0c, // USAGE_PAGE (Consumer Devices) + 0x09, 0x01, // USAGE (Consumer Control) + 0xa1, 0x01, // COLLECTION (Application) + 0x85, REPORT_ID_CONSUMER, // REPORT_ID (3) + 0x15, 0x01, // LOGICAL_MINIMUM (0x1) + 0x26, 0x9c, 0x02, // LOGICAL_MAXIMUM (0x29c) + 0x19, 0x01, // USAGE_MINIMUM (0x1) + 0x2a, 0x9c, 0x02, // USAGE_MAXIMUM (0x29c) + 0x75, 0x10, // REPORT_SIZE (16) + 0x95, 0x01, // REPORT_COUNT (1) + 0x81, 0x00, // INPUT (Data,Array,Abs) + 0xc0, // END_COLLECTION +}; +#endif + +#define KBD_HID_DESC_NUM 0 +#define KBD_HID_DESC_OFFSET (9+(9+9+7)*KBD_HID_DESC_NUM+9) + +#ifdef MOUSE_ENABLE +# define MOUSE_HID_DESC_NUM (KBD_HID_DESC_NUM + 1) +# define MOUSE_HID_DESC_OFFSET (9+(9+9+7)*MOUSE_HID_DESC_NUM+9) +#else +# define MOUSE_HID_DESC_NUM (KBD_HID_DESC_NUM + 0) +#endif + +#ifdef CONSOLE_ENABLE +#define DEBUG_HID_DESC_NUM (MOUSE_HID_DESC_NUM + 1) +#define DEBUG_HID_DESC_OFFSET (9+(9+9+7)*DEBUG_HID_DESC_NUM+9) +#else +# define DEBUG_HID_DESC_NUM (MOUSE_HID_DESC_NUM + 0) +#endif + +#ifdef EXTRAKEY_ENABLE +# define EXTRA_HID_DESC_NUM (DEBUG_HID_DESC_NUM + 1) +# define EXTRA_HID_DESC_OFFSET (9+(9+9+7)*EXTRA_HID_DESC_NUM+9) +#else +# define EXTRA_HID_DESC_NUM (DEBUG_HID_DESC_NUM + 0) +#endif + +#ifdef NKRO_ENABLE +# define KBD2_HID_DESC_NUM (EXTRA_HID_DESC_NUM + 1) +# define KBD2_HID_DESC_OFFSET (9+(9+9+7)*EXTRA_HID_DESC_NUM+9) +#else +# define KBD2_HID_DESC_NUM (EXTRA_HID_DESC_NUM + 0) +#endif + +#define NUM_INTERFACES (KBD2_HID_DESC_NUM + 1) +#define CONFIG1_DESC_SIZE (9+(9+9+7)*NUM_INTERFACES) +static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = { + // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10 + 9, // bLength; + 2, // bDescriptorType; + LSB(CONFIG1_DESC_SIZE), // wTotalLength + MSB(CONFIG1_DESC_SIZE), + NUM_INTERFACES, // bNumInterfaces + 1, // bConfigurationValue + 0, // iConfiguration + 0xA0, // bmAttributes + 50, // bMaxPower + + // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 + 9, // bLength + 4, // bDescriptorType + KBD_INTERFACE, // bInterfaceNumber + 0, // bAlternateSetting + 1, // bNumEndpoints + 0x03, // bInterfaceClass (0x03 = HID) + 0x01, // bInterfaceSubClass (0x01 = Boot) + 0x01, // bInterfaceProtocol (0x01 = Keyboard) + 0, // iInterface + // HID descriptor, HID 1.11 spec, section 6.2.1 + 9, // bLength + 0x21, // bDescriptorType + 0x11, 0x01, // bcdHID + 0, // bCountryCode + 1, // bNumDescriptors + 0x22, // bDescriptorType + sizeof(keyboard_hid_report_desc), // wDescriptorLength + 0, + // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 + 7, // bLength + 5, // bDescriptorType + KBD_ENDPOINT | 0x80, // bEndpointAddress + 0x03, // bmAttributes (0x03=intr) + KBD_SIZE, 0, // wMaxPacketSize + 10, // bInterval + +#ifdef MOUSE_ENABLE + // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 + 9, // bLength + 4, // bDescriptorType + MOUSE_INTERFACE, // bInterfaceNumber + 0, // bAlternateSetting + 1, // bNumEndpoints + 0x03, // bInterfaceClass (0x03 = HID) + // ThinkPad T23 BIOS doesn't work with boot mouse. + 0x00, // bInterfaceSubClass (0x01 = Boot) + 0x00, // bInterfaceProtocol (0x02 = Mouse) +/* + 0x01, // bInterfaceSubClass (0x01 = Boot) + 0x02, // bInterfaceProtocol (0x02 = Mouse) +*/ + 0, // iInterface + // HID descriptor, HID 1.11 spec, section 6.2.1 + 9, // bLength + 0x21, // bDescriptorType + 0x11, 0x01, // bcdHID + 0, // bCountryCode + 1, // bNumDescriptors + 0x22, // bDescriptorType + sizeof(mouse_hid_report_desc), // wDescriptorLength + 0, + // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 + 7, // bLength + 5, // bDescriptorType + MOUSE_ENDPOINT | 0x80, // bEndpointAddress + 0x03, // bmAttributes (0x03=intr) + MOUSE_SIZE, 0, // wMaxPacketSize + 1, // bInterval +#endif + +#ifdef CONSOLE_ENABLE + // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 + 9, // bLength + 4, // bDescriptorType + DEBUG_INTERFACE, // bInterfaceNumber + 0, // bAlternateSetting + 1, // bNumEndpoints + 0x03, // bInterfaceClass (0x03 = HID) + 0x00, // bInterfaceSubClass + 0x00, // bInterfaceProtocol + 0, // iInterface + // HID descriptor, HID 1.11 spec, section 6.2.1 + 9, // bLength + 0x21, // bDescriptorType + 0x11, 0x01, // bcdHID + 0, // bCountryCode + 1, // bNumDescriptors + 0x22, // bDescriptorType + sizeof(debug_hid_report_desc), // wDescriptorLength + 0, + // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 + 7, // bLength + 5, // bDescriptorType + DEBUG_TX_ENDPOINT | 0x80, // bEndpointAddress + 0x03, // bmAttributes (0x03=intr) + DEBUG_TX_SIZE, 0, // wMaxPacketSize + 1, // bInterval +#endif + +#ifdef EXTRAKEY_ENABLE + // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 + 9, // bLength + 4, // bDescriptorType + EXTRA_INTERFACE, // bInterfaceNumber + 0, // bAlternateSetting + 1, // bNumEndpoints + 0x03, // bInterfaceClass (0x03 = HID) + 0x00, // bInterfaceSubClass + 0x00, // bInterfaceProtocol + 0, // iInterface + // HID descriptor, HID 1.11 spec, section 6.2.1 + 9, // bLength + 0x21, // bDescriptorType + 0x11, 0x01, // bcdHID + 0, // bCountryCode + 1, // bNumDescriptors + 0x22, // bDescriptorType + sizeof(extra_hid_report_desc), // wDescriptorLength + 0, + // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 + 7, // bLength + 5, // bDescriptorType + EXTRA_ENDPOINT | 0x80, // bEndpointAddress + 0x03, // bmAttributes (0x03=intr) + EXTRA_SIZE, 0, // wMaxPacketSize + 10, // bInterval +#endif + +#ifdef NKRO_ENABLE + // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12 + 9, // bLength + 4, // bDescriptorType + KBD2_INTERFACE, // bInterfaceNumber + 0, // bAlternateSetting + 1, // bNumEndpoints + 0x03, // bInterfaceClass (0x03 = HID) + 0x00, // bInterfaceSubClass (0x01 = Boot) + 0x00, // bInterfaceProtocol (0x01 = Keyboard) + 0, // iInterface + // HID descriptor, HID 1.11 spec, section 6.2.1 + 9, // bLength + 0x21, // bDescriptorType + 0x11, 0x01, // bcdHID + 0, // bCountryCode + 1, // bNumDescriptors + 0x22, // bDescriptorType + sizeof(keyboard2_hid_report_desc), // wDescriptorLength + 0, + // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13 + 7, // bLength + 5, // bDescriptorType + KBD2_ENDPOINT | 0x80, // bEndpointAddress + 0x03, // bmAttributes (0x03=intr) + KBD2_SIZE, 0, // wMaxPacketSize + 1, // bInterval +#endif +}; + +// If you're desperate for a little extra code memory, these strings +// can be completely removed if iManufacturer, iProduct, iSerialNumber +// in the device desciptor are changed to zeros. +struct usb_string_descriptor_struct { + uint8_t bLength; + uint8_t bDescriptorType; + int16_t wString[]; +}; +static const struct usb_string_descriptor_struct PROGMEM string0 = { + 4, + 3, + {0x0409} +}; +static const struct usb_string_descriptor_struct PROGMEM string1 = { + sizeof(STR_MANUFACTURER), + 3, + STR_MANUFACTURER +}; +static const struct usb_string_descriptor_struct PROGMEM string2 = { + sizeof(STR_PRODUCT), + 3, + STR_PRODUCT +}; + +// This table defines which descriptor data is sent for each specific +// request from the host (in wValue and wIndex). +static const struct descriptor_list_struct { + uint16_t wValue; // descriptor type + uint16_t wIndex; + const uint8_t *addr; + uint8_t length; +} PROGMEM descriptor_list[] = { + // DEVICE descriptor + {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)}, + // CONFIGURATION descriptor + {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)}, + // HID/REPORT descriptors + {0x2100, KBD_INTERFACE, config1_descriptor+KBD_HID_DESC_OFFSET, 9}, + {0x2200, KBD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)}, +#ifdef MOUSE_ENABLE + {0x2100, MOUSE_INTERFACE, config1_descriptor+MOUSE_HID_DESC_OFFSET, 9}, + {0x2200, MOUSE_INTERFACE, mouse_hid_report_desc, sizeof(mouse_hid_report_desc)}, +#endif +#ifdef CONSOLE_ENABLE + {0x2100, DEBUG_INTERFACE, config1_descriptor+DEBUG_HID_DESC_OFFSET, 9}, + {0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)}, +#endif +#ifdef EXTRAKEY_ENABLE + {0x2100, EXTRA_INTERFACE, config1_descriptor+EXTRA_HID_DESC_OFFSET, 9}, + {0x2200, EXTRA_INTERFACE, extra_hid_report_desc, sizeof(extra_hid_report_desc)}, +#endif +#ifdef NKRO_ENABLE + {0x2100, KBD2_INTERFACE, config1_descriptor+KBD2_HID_DESC_OFFSET, 9}, + {0x2200, KBD2_INTERFACE, keyboard2_hid_report_desc, sizeof(keyboard2_hid_report_desc)}, +#endif + // STRING descriptors + {0x0300, 0x0000, (const uint8_t *)&string0, 4}, + {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)}, + {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)} +}; +#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct)) + + +/************************************************************************** + * + * Variables - these are the only non-stack RAM usage + * + **************************************************************************/ + +// zero when we are not configured, non-zero when enumerated +static volatile uint8_t usb_configuration=0; + + +/************************************************************************** + * + * Public Functions - these are the API intended for the user + * + **************************************************************************/ + + +// initialize USB +void usb_init(void) +{ + HW_CONFIG(); + USB_FREEZE(); // enable USB + PLL_CONFIG(); // config PLL + while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock + USB_CONFIG(); // start USB clock + UDCON = 0; // enable attach resistor + usb_configuration = 0; + suspend = false; + UDIEN = (1<<EORSTE)|(1<<SOFE)|(1<<SUSPE)|(1<<WAKEUPE); + sei(); +} + +// return 0 if the USB is not configured, or the configuration +// number selected by the HOST +uint8_t usb_configured(void) +{ + return usb_configuration && !suspend; +} + +void usb_remote_wakeup(void) +{ + UDCON |= (1<<RMWKUP); + while (UDCON & (1<<RMWKUP)); +} + + + +/************************************************************************** + * + * Private Functions - not intended for general user consumption.... + * + **************************************************************************/ + + + +// USB Device Interrupt - handle all device-level events +// the transmit buffer flushing is triggered by the start of frame +// +ISR(USB_GEN_vect) +{ + uint8_t intbits, t; + static uint8_t div4=0; + + intbits = UDINT; + UDINT = 0; + if ((intbits & (1<<SUSPI)) && (UDIEN & (1<<SUSPE)) && usb_configuration) { +#ifdef SLEEP_LED_ENABLE + sleep_led_enable(); +#endif + UDIEN &= ~(1<<SUSPE); + UDIEN |= (1<<WAKEUPE); + suspend = true; + } + if ((intbits & (1<<WAKEUPI)) && (UDIEN & (1<<WAKEUPE)) && usb_configuration) { + suspend_wakeup_init(); +#ifdef SLEEP_LED_ENABLE + sleep_led_disable(); + // NOTE: converters may not accept this + led_set(host_keyboard_leds()); +#endif + + UDIEN |= (1<<SUSPE); + UDIEN &= ~(1<<WAKEUPE); + suspend = false; + } + if (intbits & (1<<EORSTI)) { + UENUM = 0; + UECONX = 1; + UECFG0X = EP_TYPE_CONTROL; + UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER; + UEIENX = (1<<RXSTPE); + usb_configuration = 0; + } + if ((intbits & (1<<SOFI)) && usb_configuration) { + t = debug_flush_timer; + if (t) { + debug_flush_timer = -- t; + if (!t) { + UENUM = DEBUG_TX_ENDPOINT; + while ((UEINTX & (1<<RWAL))) { + UEDATX = 0; + } + UEINTX = 0x3A; + } + } + /* TODO: should keep IDLE rate on each keyboard interface */ +#ifdef NKRO_ENABLE + if (!keyboard_nkro && keyboard_idle && (++div4 & 3) == 0) { +#else + if (keyboard_idle && (++div4 & 3) == 0) { +#endif + UENUM = KBD_EN |