2 files changed, 125 insertions, 74 deletions

diff --git a/quantum/split_common/post_config.h b/quantum/split_common/post_config.h
new file mode 100644
index 0000000000..0e59df3d06
--- /dev/null
+++ b/quantum/split_common/post_config.h
@@ -0,0 +1,15 @@
+#if defined(USE_I2C) || defined(EH)
+  // When using I2C, using rgblight implicitly involves split support.
+  #if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_SPLIT)
+    #define RGBLIGHT_SPLIT
+  #endif
+
+#else  // use serial
+  // When using serial, the user must define RGBLIGHT_SPLIT explicitly
+  //  in config.h as needed.
+  //      see quantum/rgblight_post_config.h
+  #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    // When using serial and RGBLIGHT_SPLIT need separate transaction
+    #define SERIAL_USE_MULTI_TRANSACTION
+  #endif
+#endif
diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c
index ab055ee656..7ea1a9cec9 100644
--- a/quantum/split_common/transport.c
+++ b/quantum/split_common/transport.c
@@ -25,36 +25,23 @@ extern backlight_config_t backlight_config;
 #  include "i2c_master.h"
 #  include "i2c_slave.h"
 
-typedef struct __attribute__ ((__packed__)) {
-#ifdef BACKLIGHT_ENABLE
-  uint8_t backlight_level;
-#endif
-#ifdef RGBLIGHT_ENABLE
-  uint32_t rgb_settings;
+typedef struct _I2C_slave_buffer_t {
+    matrix_row_t smatrix[ROWS_PER_HAND];
+    uint8_t      backlight_level;
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    rgblight_syncinfo_t rgblight_sync;
 #endif
 #ifdef ENCODER_ENABLE
-  uint8_t encoder_state[NUMBER_OF_ENCODERS];
-#endif
-  // Keep matrix last, we are only using this for it's offset
-  uint8_t matrix_start[0];
-} transport_values_t;
-
-__attribute__ ((unused))
-static transport_values_t transport_values;
-
-#ifdef BACKLIGHT_ENABLE
-#  define I2C_BACKLIT_START (uint8_t)offsetof(transport_values_t, backlight_level)
-#endif
-
-#ifdef RGBLIGHT_ENABLE
-#  define I2C_RGB_START (uint8_t)offsetof(transport_values_t, rgb_settings)
+    uint8_t encoder_state[NUMBER_OF_ENCODERS];
 #endif
+} I2C_slave_buffer_t;
 
-#ifdef ENCODER_ENABLE
-#  define I2C_ENCODER_START (uint8_t)offsetof(transport_values_t, encoder_state)
-#endif
+static I2C_slave_buffer_t * const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg;
 
-#define I2C_KEYMAP_START (uint8_t)offsetof(transport_values_t, matrix_start)
+#  define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level)
+#  define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync)
+#  define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix)
+#  define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state)
 
 #  define TIMEOUT 100
 
@@ -64,30 +51,32 @@ static transport_values_t transport_values;
 
 // Get rows from other half over i2c
 bool transport_master(matrix_row_t matrix[]) {
-  i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, ROWS_PER_HAND * sizeof(matrix_row_t), TIMEOUT);
+  i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, sizeof(i2c_buffer->smatrix), TIMEOUT);
 
   // write backlight info
 #  ifdef BACKLIGHT_ENABLE
   uint8_t level = get_backlight_level();
-  if (level != transport_values.backlight_level) {
-    if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) {
-      transport_values.backlight_level = level;
+  if (level != i2c_buffer->backlight_level) {
+    if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIGHT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) {
+      i2c_buffer->backlight_level = level;
     }
   }
 #  endif
 
-#  ifdef RGBLIGHT_ENABLE
-  uint32_t rgb = rgblight_read_dword();
-  if (rgb != transport_values.rgb_settings) {
-    if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, (void *)&rgb, sizeof(rgb), TIMEOUT) >= 0) {
-      transport_values.rgb_settings = rgb;
+#  if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+  if (rgblight_get_change_flags()) {
+    rgblight_syncinfo_t rgblight_sync;
+    rgblight_get_syncinfo(&rgblight_sync);
+    if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START,
+                     (void *)&rgblight_sync, sizeof(rgblight_sync), TIMEOUT) >= 0) {
+      rgblight_clear_change_flags();
     }
   }
 #  endif
 
 #  ifdef ENCODER_ENABLE
-  i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)transport_values.encoder_state, sizeof(transport_values.encoder_state), TIMEOUT);
-  encoder_update_raw(&transport_values.encoder_state[0]);
+  i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(I2C_slave_buffer_t.encoder_state), TIMEOUT);
+  encoder_update_raw(i2c_buffer->encoder_state);
 #  endif
 
   return true;
@@ -95,21 +84,23 @@ bool transport_master(matrix_row_t matrix[]) {
 
 void transport_slave(matrix_row_t matrix[]) {
   // Copy matrix to I2C buffer
-  memcpy((void*)(i2c_slave_reg + I2C_KEYMAP_START), (void *)matrix, ROWS_PER_HAND * sizeof(matrix_row_t) );
+  memcpy((void*)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix));
 
 // Read Backlight Info
 #  ifdef BACKLIGHT_ENABLE
-  backlight_set(i2c_slave_reg[I2C_BACKLIT_START]);
+  backlight_set(i2c_buffer->backlight_level);
 #  endif
 
-#  ifdef RGBLIGHT_ENABLE
-  uint32_t rgb = *(uint32_t *)(i2c_slave_reg + I2C_RGB_START);
+#  if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
   // Update the RGB with the new data
-  rgblight_update_dword(rgb);
+  if (i2c_buffer->rgblight_sync.status.change_flags != 0) {
+      rgblight_update_sync(&i2c_buffer->rgblight_sync, false);
+      i2c_buffer->rgblight_sync.status.change_flags = 0;
+  }
 #  endif
 
 #  ifdef ENCODER_ENABLE
-  encoder_state_raw((uint8_t*)(i2c_slave_reg + I2C_ENCODER_START));
+  encoder_state_raw(i2c_buffer->encoder_state);
 #  endif
 }
 
@@ -121,53 +112,109 @@ void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); }
 
 #  include "serial.h"
 
-typedef struct __attribute__ ((__packed__)) {
+typedef struct _Serial_s2m_buffer_t {
+  // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
+  matrix_row_t smatrix[ROWS_PER_HAND];
+
 #  ifdef ENCODER_ENABLE
   uint8_t encoder_state[NUMBER_OF_ENCODERS];
 #  endif
-  // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
-  matrix_row_t smatrix[ROWS_PER_HAND];
+
 } Serial_s2m_buffer_t;
 
-typedef struct __attribute__ ((__packed__)) {
+typedef struct _Serial_m2s_buffer_t {
 #  ifdef BACKLIGHT_ENABLE
   uint8_t           backlight_level;
 #  endif
-#  if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
-  rgblight_config_t rgblight_config;  // not yet use
-  //
-  // When MCUs on both sides drive their respective RGB LED chains,
-  // it is necessary to synchronize, so it is necessary to communicate RGB
-  // information. In that case, define RGBLED_SPLIT with info on the number
-  // of LEDs on each half.
-  //
-  // Otherwise, if the master side MCU drives both sides RGB LED chains,
-  // there is no need to communicate.
-#  endif
 } Serial_m2s_buffer_t;
 
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+// When MCUs on both sides drive their respective RGB LED chains,
+// it is necessary to synchronize, so it is necessary to communicate RGB
+// information. In that case, define RGBLIGHT_SPLIT with info on the number
+// of LEDs on each half.
+//
+// Otherwise, if the master side MCU drives both sides RGB LED chains,
+// there is no need to communicate.
+
+typedef struct _Serial_rgblight_t {
+    rgblight_syncinfo_t rgblight_sync;
+} Serial_rgblight_t;
+
+volatile Serial_rgblight_t serial_rgblight = {};
+uint8_t volatile status_rgblight           = 0;
+#endif
+
 volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
 volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
 uint8_t volatile status0                       = 0;
 
+enum serial_transaction_id {
+    GET_SLAVE_MATRIX = 0,
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    PUT_RGBLIGHT,
+#endif
+};
+
 SSTD_t transactions[] = {
-    {
+    [GET_SLAVE_MATRIX] = {
         (uint8_t *)&status0,
         sizeof(serial_m2s_buffer),
         (uint8_t *)&serial_m2s_buffer,
         sizeof(serial_s2m_buffer),
         (uint8_t *)&serial_s2m_buffer,
     },
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    [PUT_RGBLIGHT] = {
+        (uint8_t *)&status_rgblight,
+        sizeof(serial_rgblight),
+        (uint8_t *)&serial_rgblight,
+        0, NULL // no slave to master transfer
+    },
+#endif
 };
 
 void transport_master_init(void) { soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
 
 void transport_slave_init(void) { soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
 
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+
+// rgblight synchronization information communication.
+
+void transport_rgblight_master(void) {
+  if (rgblight_get_change_flags()) {
+    rgblight_get_syncinfo((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync);
+    if (soft_serial_transaction(PUT_RGBLIGHT) == TRANSACTION_END) {
+        rgblight_clear_change_flags();
+    }
+  }
+}
+
+void transport_rgblight_slave(void) {
+  if (status_rgblight == TRANSACTION_ACCEPTED) {
+    rgblight_update_sync((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync,
+                         false);
+    status_rgblight = TRANSACTION_END;
+  }
+}
+
+#else
+#define transport_rgblight_master()
+#define transport_rgblight_slave()
+#endif
+
 bool transport_master(matrix_row_t matrix[]) {
-  if (soft_serial_transaction()) {
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  if (soft_serial_transaction() != TRANSACTION_END) {
     return false;
   }
+#else
+  transport_rgblight_master();
+  if (soft_serial_transaction(GET_SLAVE_MATRIX) != TRANSACTION_END) {
+    return false;
+  }
+#endif
 
   // TODO:  if MATRIX_COLS > 8 change to unpack()
   for (int i = 0; i < ROWS_PER_HAND; ++i) {
@@ -179,23 +226,15 @@ bool transport_master(matrix_row_t matrix[]) {
   serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
 #  endif
 
-#  if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
-  static rgblight_config_t prev_rgb = {~0};
-  uint32_t rgb = rgblight_read_dword();
-  if (rgb != prev_rgb.raw) {
-    serial_m2s_buffer.rgblight_config.raw = rgb;
-    prev_rgb.raw = rgb;
-  }
-#  endif
-
 #  ifdef ENCODER_ENABLE
-  encoder_update_raw((uint8_t*)&serial_s2m_buffer.encoder_state);
+  encoder_update_raw((uint8_t *)serial_s2m_buffer.encoder_state);
 #  endif
 
   return true;
 }
 
 void transport_slave(matrix_row_t matrix[]) {
+  transport_rgblight_slave();
   // TODO: if MATRIX_COLS > 8 change to pack()
   for (int i = 0; i < ROWS_PER_HAND; ++i) {
     serial_s2m_buffer.smatrix[i] = matrix[i];
@@ -203,14 +242,11 @@ void transport_slave(matrix_row_t matrix[]) {
 #  ifdef BACKLIGHT_ENABLE
   backlight_set(serial_m2s_buffer.backlight_level);
 #  endif
-#  if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
-  // Update RGB config with the new data
-  rgblight_update_dword(serial_m2s_buffer.rgblight_config.raw);
-#  endif
 
 #  ifdef ENCODER_ENABLE
-  encoder_state_raw((uint8_t*)&serial_s2m_buffer.encoder_state);
+  encoder_state_raw((uint8_t *)serial_s2m_buffer.encoder_state);
 #  endif
+
 }
 
 #endif