4 files changed, 14 insertions, 14 deletions
diff --git a/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c b/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c
index a46b099195..99a6cfaba9 100644
--- a/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c
+++ b/platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c
@@ -185,7 +185,7 @@ bool ws2812_init(void) {
                             (pio_idx == 0 ? PAL_MODE_ALTERNATE_PIO0 : PAL_MODE_ALTERNATE_PIO1);
     // clang-format on
 
-    palSetLineMode(RGB_DI_PIN, rgb_pin_mode);
+    palSetLineMode(WS2812_DI_PIN, rgb_pin_mode);
 
     STATE_MACHINE = pio_claim_unused_sm(pio, true);
     if (STATE_MACHINE < 0) {
@@ -195,11 +195,11 @@ bool ws2812_init(void) {
 
     uint offset = pio_add_program(pio, &ws2812_program);
 
-    pio_sm_set_consecutive_pindirs(pio, STATE_MACHINE, RGB_DI_PIN, 1, true);
+    pio_sm_set_consecutive_pindirs(pio, STATE_MACHINE, WS2812_DI_PIN, 1, true);
 
     pio_sm_config config = pio_get_default_sm_config();
     sm_config_set_wrap(&config, offset + WS2812_WRAP_TARGET, offset + WS2812_WRAP);
-    sm_config_set_sideset_pins(&config, RGB_DI_PIN);
+    sm_config_set_sideset_pins(&config, WS2812_DI_PIN);
     sm_config_set_fifo_join(&config, PIO_FIFO_JOIN_TX);
 
 #if defined(WS2812_EXTERNAL_PULLUP)
diff --git a/platforms/chibios/drivers/ws2812_bitbang.c b/platforms/chibios/drivers/ws2812_bitbang.c
index 55ac333b1e..d05deb1a50 100644
--- a/platforms/chibios/drivers/ws2812_bitbang.c
+++ b/platforms/chibios/drivers/ws2812_bitbang.c
@@ -53,22 +53,22 @@ void sendByte(uint8_t byte) {
         // using something like wait_ns(is_one ? T1L : T0L) here throws off timings
         if (is_one) {
             // 1
-            writePinHigh(RGB_DI_PIN);
+            writePinHigh(WS2812_DI_PIN);
             wait_ns(WS2812_T1H);
-            writePinLow(RGB_DI_PIN);
+            writePinLow(WS2812_DI_PIN);
             wait_ns(WS2812_T1L);
         } else {
             // 0
-            writePinHigh(RGB_DI_PIN);
+            writePinHigh(WS2812_DI_PIN);
             wait_ns(WS2812_T0H);
-            writePinLow(RGB_DI_PIN);
+            writePinLow(WS2812_DI_PIN);
             wait_ns(WS2812_T0L);
         }
     }
 }
 
 void ws2812_init(void) {
-    palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
+    palSetLineMode(WS2812_DI_PIN, WS2812_OUTPUT_MODE);
 }
 
 // Setleds for standard RGB
diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c
index c4a591c10b..04c8279a97 100644
--- a/platforms/chibios/drivers/ws2812_pwm.c
+++ b/platforms/chibios/drivers/ws2812_pwm.c
@@ -308,7 +308,7 @@ void ws2812_init(void) {
     for (i = 0; i < WS2812_RESET_BIT_N; i++)
         ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero
 
-    palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
+    palSetLineMode(WS2812_DI_PIN, WS2812_OUTPUT_MODE);
 
     // PWM Configuration
     //#pragma GCC diagnostic ignored "-Woverride-init"  // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c
index 03ffbd7f82..c28f5007f1 100644
--- a/platforms/chibios/drivers/ws2812_spi.c
+++ b/platforms/chibios/drivers/ws2812_spi.c
@@ -136,7 +136,7 @@ static void set_led_color_rgb(LED_TYPE color, int pos) {
 }
 
 void ws2812_init(void) {
-    palSetLineMode(RGB_DI_PIN, WS2812_MOSI_OUTPUT_MODE);
+    palSetLineMode(WS2812_DI_PIN, WS2812_MOSI_OUTPUT_MODE);
 
 #ifdef WS2812_SPI_SCK_PIN
     palSetLineMode(WS2812_SPI_SCK_PIN, WS2812_SCK_OUTPUT_MODE);
@@ -150,8 +150,8 @@ void ws2812_init(void) {
         WS2812_SPI_BUFFER_MODE,
 #    endif
         NULL, // end_cb
-        PAL_PORT(RGB_DI_PIN),
-        PAL_PAD(RGB_DI_PIN),
+        PAL_PORT(WS2812_DI_PIN),
+        PAL_PAD(WS2812_DI_PIN),
 #    if defined(WB32F3G71xx) || defined(WB32FQ95xx)
         0,
         0,
@@ -170,8 +170,8 @@ void ws2812_init(void) {
 #    endif
         NULL, // data_cb
         NULL, // error_cb
-        PAL_PORT(RGB_DI_PIN),
-        PAL_PAD(RGB_DI_PIN),
+        PAL_PORT(WS2812_DI_PIN),
+        PAL_PAD(WS2812_DI_PIN),
         WS2812_SPI_DIVISOR_CR1_BR_X,
         0
 #endif