summaryrefslogtreecommitdiffstats
path: root/platforms/chibios/drivers/i2c_master.h
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios/drivers/i2c_master.h')
-rw-r--r--platforms/chibios/drivers/i2c_master.h113
1 files changed, 113 insertions, 0 deletions
diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h
new file mode 100644
index 0000000000..c68109acbd
--- /dev/null
+++ b/platforms/chibios/drivers/i2c_master.h
@@ -0,0 +1,113 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+#pragma once
+
+#include <ch.h>
+#include <hal.h>
+
+#ifdef I2C1_BANK
+# define I2C1_SCL_BANK I2C1_BANK
+# define I2C1_SDA_BANK I2C1_BANK
+#endif
+
+#ifndef I2C1_SCL_BANK
+# define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+# define I2C1_SDA_BANK GPIOB
+#endif
+
+#ifndef I2C1_SCL
+# define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+# define I2C1_SDA 7
+#endif
+
+#ifdef USE_I2CV1
+# ifndef I2C1_OPMODE
+# define I2C1_OPMODE OPMODE_I2C
+# endif
+# ifndef I2C1_CLOCK_SPEED
+# define I2C1_CLOCK_SPEED 100000 /* 400000 */
+# endif
+# ifndef I2C1_DUTY_CYCLE
+# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+# endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+# ifndef I2C1_TIMINGR_PRESC
+# define I2C1_TIMINGR_PRESC 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLDEL
+# define I2C1_TIMINGR_SCLDEL 7U
+# endif
+# ifndef I2C1_TIMINGR_SDADEL
+# define I2C1_TIMINGR_SDADEL 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLH
+# define I2C1_TIMINGR_SCLH 38U
+# endif
+# ifndef I2C1_TIMINGR_SCLL
+# define I2C1_TIMINGR_SCLL 129U
+# endif
+#endif
+
+#ifndef I2C_DRIVER
+# define I2C_DRIVER I2CD1
+#endif
+
+#ifdef USE_GPIOV1
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE 4
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE 4
+# endif
+#endif
+
+typedef int16_t i2c_status_t;
+
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+#define I2C_STATUS_TIMEOUT (-2)
+
+void i2c_init(void);
+i2c_status_t i2c_start(uint8_t address);
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+void i2c_stop(void);