diff options
Diffstat (limited to 'lib/lufa/Projects/Benito')
| -rw-r--r-- | lib/lufa/Projects/Benito/Benito.c | 311 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/Benito.h | 79 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/Benito.txt | 106 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/Config/AppConfig.h | 57 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/Config/LUFAConfig.h | 93 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/Descriptors.c | 244 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/Descriptors.h | 112 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/LUFA Benito Programmer.inf | 66 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/asf.xml | 53 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/doxyfile | 2395 | ||||
| -rw-r--r-- | lib/lufa/Projects/Benito/makefile | 43 |
11 files changed, 0 insertions, 3559 deletions
diff --git a/lib/lufa/Projects/Benito/Benito.c b/lib/lufa/Projects/Benito/Benito.c deleted file mode 100644 index 93a39cb7bc..0000000000 --- a/lib/lufa/Projects/Benito/Benito.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the Benito project. This file contains the main tasks of - * the project and is responsible for the initial application hardware configuration. - */ - -#include "Benito.h" - -/** Circular buffer to hold data from the serial port before it is sent to the host. */ -static RingBuffer_t USARTtoUSB_Buffer; - -/** Underlying data buffer for \ref USARTtoUSB_Buffer, where the stored bytes are located. */ -static uint8_t USARTtoUSB_Buffer_Data[128]; - -/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ -volatile struct -{ - uint8_t ResetPulse; /**< Milliseconds remaining for target /RESET pulse */ - uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ - uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */ -} PulseMSRemaining; - -/** Milliseconds remaining until the receive buffer is flushed to the USB host */ -uint8_t FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS; - -/** LUFA CDC Class driver interface configuration and state information. This structure is - * passed to all CDC Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = - { - .Config = - { - .ControlInterfaceNumber = INTERFACE_ID_CDC_CCI, - .DataINEndpoint = - { - .Address = CDC_TX_EPADDR, - .Size = CDC_TXRX_EPSIZE, - .Banks = 1, - }, - .DataOUTEndpoint = - { - .Address = CDC_RX_EPADDR, - .Size = CDC_TXRX_EPSIZE, - .Banks = 1, - }, - .NotificationEndpoint = - { - .Address = CDC_NOTIFICATION_EPADDR, - .Size = CDC_NOTIFICATION_EPSIZE, - .Banks = 1, - }, - }, - }; - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - RingBuffer_InitBuffer(&USARTtoUSB_Buffer, USARTtoUSB_Buffer_Data, sizeof(USARTtoUSB_Buffer_Data)); - - GlobalInterruptEnable(); - - for (;;) - { - /* Echo bytes from the host to the target via the hardware USART */ - if ((UCSR1A & (1 << UDRE1)) && CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface)) - { - UDR1 = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); - - LEDs_TurnOnLEDs(LEDMASK_TX); - PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS; - } - - /* Check if the millisecond timer has elapsed */ - if (TIFR0 & (1 << OCF0A)) - { - /* Clear flush timer expiry flag */ - TIFR0 |= (1 << TOV0); - - /* Check if the reset pulse period has elapsed, if so tristate the target reset line */ - if (PulseMSRemaining.ResetPulse && !(--PulseMSRemaining.ResetPulse)) - { - LEDs_TurnOffLEDs(LEDMASK_BUSY); - AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK; - } - - /* Check if the LEDs should be ping-ponging (during enumeration) */ - if (PulseMSRemaining.PingPongLEDPulse && !(--PulseMSRemaining.PingPongLEDPulse)) - { - LEDs_ToggleLEDs(LEDMASK_TX | LEDMASK_RX); - PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS; - } - - /* Turn off TX LED(s) once the TX pulse period has elapsed */ - if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse)) - LEDs_TurnOffLEDs(LEDMASK_TX); - - /* Turn off RX LED(s) once the RX pulse period has elapsed */ - if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse)) - LEDs_TurnOffLEDs(LEDMASK_RX); - - /* Check if the receive buffer flush period has expired */ - uint16_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer); - if (!(--FlushPeriodRemaining) || (BufferCount > 200)) - { - FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS; - - /* Start RX LED indicator pulse */ - if (BufferCount) - { - LEDs_TurnOnLEDs(LEDMASK_RX); - PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS; - } - - /* Echo bytes from the target to the host via the virtual serial port */ - while (BufferCount--) - { - /* Try to send the next byte of data to the host, abort if there is an error without dequeuing */ - if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface, - RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError) - { - break; - } - - /* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */ - RingBuffer_Remove(&USARTtoUSB_Buffer); - } - } - } - - CDC_Device_USBTask(&VirtualSerial_CDC_Interface); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ -#if (ARCH == ARCH_AVR8) - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); -#endif - - /* Hardware Initialization */ - LEDs_Init(); - USB_Init(); - - /* Millisecond Timer Interrupt */ - OCR0A = (F_CPU / 64 / 1000); - TCCR0A = (1 << WGM01); - TCCR0B = ((1 << CS01) | (1 << CS00)); - - /* Tristate target /RESET Line */ - AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK; - AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK; -} - -/** Event handler for the library USB Connection event. */ -void EVENT_USB_Device_Connect(void) -{ - PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS; - LEDs_SetAllLEDs(LEDMASK_TX); -} - -/** Event handler for the library USB Disconnection event. */ -void EVENT_USB_Device_Disconnect(void) -{ - PulseMSRemaining.PingPongLEDPulse = 0; - LEDs_SetAllLEDs(LEDS_NO_LEDS); -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - bool ConfigSuccess = true; - - ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); - - PulseMSRemaining.PingPongLEDPulse = 0; - - LEDs_SetAllLEDs(ConfigSuccess ? LEDS_NO_LEDS : LEDMASK_ERROR); -} - -/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to - * the device from the USB host before passing along unhandled control requests to the library for processing - * internally. - */ -void EVENT_USB_Device_ControlRequest(void) -{ - CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); -} - -/** Event handler for the CDC Class driver Line Encoding Changed event. - * - * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced - */ -void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) -{ - uint8_t ConfigMask = 0; - - switch (CDCInterfaceInfo->State.LineEncoding.ParityType) - { - case CDC_PARITY_Odd: - ConfigMask = ((1 << UPM11) | (1 << UPM10)); - break; - case CDC_PARITY_Even: - ConfigMask = (1 << UPM11); - break; - } - - if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits) - ConfigMask |= (1 << USBS1); - - switch (CDCInterfaceInfo->State.LineEncoding.DataBits) - { - case 6: - ConfigMask |= (1 << UCSZ10); - break; - case 7: - ConfigMask |= (1 << UCSZ11); - break; - case 8: - ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); - break; - } - - /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */ - UCSR1B = 0; - UCSR1A = 0; - UCSR1C = 0; - - /* Set the new baud rate before configuring the USART */ - UBRR1 = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS); - - /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */ - UCSR1C = ConfigMask; - UCSR1A = (1 << U2X1); - UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); -} - -/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer - * for later transmission to the host. - */ -ISR(USART1_RX_vect, ISR_BLOCK) -{ - uint8_t ReceivedByte = UDR1; - - if (USB_DeviceState == DEVICE_STATE_Configured) - RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte); -} - -/** Event handler for the CDC Class driver Host-to-Device Line Encoding Changed event. - * - * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced - */ -void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) -{ - static bool PreviousDTRState = false; - bool CurrentDTRState = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR); - - /* Check if the DTR line has been asserted - if so, start the target AVR's reset pulse */ - if (!(PreviousDTRState) && CurrentDTRState) - { - LEDs_SetAllLEDs(LEDMASK_BUSY); - - AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK; - PulseMSRemaining.ResetPulse = AVR_RESET_PULSE_MS; - } - - PreviousDTRState = CurrentDTRState; -} - diff --git a/lib/lufa/Projects/Benito/Benito.h b/lib/lufa/Projects/Benito/Benito.h deleted file mode 100644 index 28bed26afa..0000000000 --- a/lib/lufa/Projects/Benito/Benito.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Benito.c. - */ - -#ifndef _BENITO_H_ -#define _BENITO_H_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/wdt.h> - #include <avr/power.h> - #include <avr/interrupt.h> - - #include "Descriptors.h" - #include "Config/AppConfig.h" - - #include <LUFA/Drivers/Board/LEDs.h> - #include <LUFA/Drivers/Peripheral/Serial.h> - #include <LUFA/Drivers/Misc/RingBuffer.h> - #include <LUFA/Drivers/USB/USB.h> - #include <LUFA/Platform/Platform.h> - - /* Macros: */ - /** LED mask for the library LED driver, to indicate TX activity. */ - #define LEDMASK_TX LEDS_LED1 - - /** LED mask for the library LED driver, to indicate RX activity. */ - #define LEDMASK_RX LEDS_LED2 - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_ERROR (LEDS_LED1 | LEDS_LED2) - - /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ - #define LEDMASK_BUSY (LEDS_LED1 | LEDS_LED2) - - /* Function Prototypes: */ - void SetupHardware(void); - - void EVENT_USB_Device_Connect(void); - void EVENT_USB_Device_Disconnect(void); - void EVENT_USB_Device_ConfigurationChanged(void); - void EVENT_USB_Device_ControlRequest(void); - - void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo); - void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo); - -#endif - diff --git a/lib/lufa/Projects/Benito/Benito.txt b/lib/lufa/Projects/Benito/Benito.txt deleted file mode 100644 index 07bec52b3a..0000000000 --- a/lib/lufa/Projects/Benito/Benito.txt +++ /dev/null @@ -1,106 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Benito Arduino Programmer Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * \li Series 6 USB AVRs (AT90USBxxx6) - * \li Series 4 USB AVRs (ATMEGAxxU4) - * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * <table> - * <tr> - * <td><b>USB Mode:</b></td> - * <td>Device</td> - * </tr> - * <tr> - * <td><b>USB Class:</b></td> - * <td>Communications Device Class (CDC)</td> - * </tr> - * <tr> - * <td><b>USB Subclass:</b></td> - * <td>Abstract Control Model (ACM)</td> - * </tr> - * <tr> - * <td><b>Relevant Standards:</b></td> - * <td>USBIF CDC Class Standard \n - * Arduino Bootloader Specification</td> - * </tr> - * <tr> - * <td><b>Supported USB Speeds:</b></td> - * <td>Full Speed Mode</td> - * </tr> - * </table> - * - * \section Sec_Description Project Description: - * - * Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This - * project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse - * to appear on a given port pin, to control the target's /RESET pin. - * - * This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs. - * - * After running this project for the first time on a new computer, you will need to supply the .INF file located - * in this project's directory as the device's driver when running under Windows. This will enable Windows to use - * its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should - * automatically use their own inbuilt CDC-ACM drivers. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. - * - * <table> - * <tr> - * <th><b>Define Name:</b></th> - * <th><b>Location:</b></th> - * <th><b>Description:</b></th> - * </tr> - * <tr> - * <td>AVR_RESET_LINE_PORT</td> - * <td>AppConfig.h</td> - * <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td> - * </tr> - * <tr> - * <td>AVR_RESET_LINE_DDR</td> - * <td>AppConfig.h</td> - * <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td> - * </tr> - * <tr> - * <td>AVR_RESET_LINE_MASK</td> - * <td>AppConfig.h</td> - * <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td> - * </tr> - * <tr> - * <td>AVR_RESET_PULSE_MS</td> - * <td>AppConfig.h</td> - * <td>Pulse length in milliseconds for the target /RESET pulse.</td> - * </tr> - * <tr> - * <td>TX_RX_LED_PULSE_MS</td> - * <td>AppConfig.h</td> - * <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td> - * </tr> - * <tr> - * <td>PING_PONG_LED_PULSE_MS</td> - * <td>AppConfig.h</td> - * <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td> - * </tr> - * <tr> - * <td>RECEIVE_BUFFER_FLUSH_MS</td> - * <td>AppConfig.h</td> - * <td>Period between flushings of received data buffer to the attached USB host.</td> - * </tr> - * </table> - */ - diff --git a/lib/lufa/Projects/Benito/Config/AppConfig.h b/lib/lufa/Projects/Benito/Config/AppConfig.h deleted file mode 100644 index 3d81c45b05..0000000000 --- a/lib/lufa/Projects/Benito/Config/AppConfig.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Application Configuration Header File - * - * This is a header file which is be used to configure some of - * the application's compile time options, as an alternative to - * specifying the compile time constants supplied through a - * makefile or build system. - * - * For information on what each token does, refer to the - * \ref Sec_Options section of the application documentation. - */ - -#ifndef _APP_CONFIG_H_ -#define _APP_CONFIG_H_ - - #define AVR_RESET_LINE_PORT PORTD - #define AVR_RESET_LINE_DDR DDRD - #define AVR_RESET_LINE_MASK (1 << 4) - - #define AVR_RESET_PULSE_MS 10 - - #define TX_RX_LED_PULSE_MS 30 - #define PING_PONG_LED_PULSE_MS 100 - - #define RECEIVE_BUFFER_FLUSH_MS 10 - -#endif diff --git a/lib/lufa/Projects/Benito/Config/LUFAConfig.h b/lib/lufa/Projects/Benito/Config/LUFAConfig.h deleted file mode 100644 index 6b113c8276..0000000000 --- a/lib/lufa/Projects/Benito/Config/LUFAConfig.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Library Configuration Header File - * - * This header file is used to configure LUFA's compile time options, - * as an alternative to the compile time constants supplied through - * a makefile. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _LUFA_CONFIG_H_ -#define _LUFA_CONFIG_H_ - - #if (ARCH == ARCH_AVR8) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ - #define ORDERED_EP_CONFIG - #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) - #define USB_DEVICE_ONLY -// #define USB_HOST_ONLY -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT -// #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ -// #define USE_RAM_DESCRIPTORS - #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS -// #define NO_INTERNAL_SERIAL - #define FIXED_CONTROL_ENDPOINT_SIZE 8 - #define DEVICE_STATE_AS_GPIOR 0 - #define FIXED_NUM_CONFIGURATIONS 1 -// #define CONTROL_ONLY_DEVICE - #define INTERRUPT_CONTROL_ENDPOINT -// #define NO_DEVICE_REMOTE_WAKEUP -// #define NO_DEVICE_SELF_POWER - - /* USB Host Mode Driver Related Tokens: */ -// #define HOST_STATE_AS_GPIOR {Insert Value Here} -// #define USB_HOST_TIMEOUT_MS {Insert Value Here} -// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} -// #define NO_AUTO_VBUS_MANAGEMENT -// #define INVERTED_VBUS_ENABLE_LINE - - #else - - #error Unsupported architecture for this LUFA configuration file. - - #endif -#endif diff --git a/lib/lufa/Projects/Benito/Descriptors.c b/lib/lufa/Projects/Benito/Descriptors.c deleted file mode 100644 index 86cfa9a8e8..0000000000 --- a/lib/lufa/Projects/Benito/Descriptors.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - -/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(1,1,0), - .Class = CDC_CSCP_CDCClass, - .SubClass = CDC_CSCP_NoSpecificSubclass, - .Protocol = CDC_CSCP_NoSpecificProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x2060, - .ReleaseNumber = VERSION_BCD(0,0,1), - - .ManufacturerStrIndex = STRING_ID_Manufacturer, - .ProductStrIndex = STRING_ID_Product, - .SerialNumStrIndex = USE_INTERNAL_SERIAL, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 2, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .CDC_CCI_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_CDC_CCI, - .AlternateSetting = 0, - - .TotalEndpoints = 1, - - .Class = CDC_CSCP_CDCClass, - .SubClass = CDC_CSCP_ACMSubclass, - .Protocol = CDC_CSCP_ATCommandProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .CDC_Functional_Header = - { - .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, - .Subtype = CDC_DSUBTYPE_CSInterface_Header, - - .CDCSpecification = VERSION_BCD(1,1,0), - }, - - .CDC_Functional_ACM = - { - .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, - .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - - .Capabilities = 0x06, - }, - - .CDC_Functional_Union = - { - .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, - .Subtype = CDC_DSUBTYPE_CSInterface_Union, - - .MasterInterfaceNumber = INTERFACE_ID_CDC_CCI, - .SlaveInterfaceNumber = INTERFACE_ID_CDC_DCI, - }, - - .CDC_NotificationEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = CDC_NOTIFICATION_EPADDR, - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CDC_NOTIFICATION_EPSIZE, - .PollingIntervalMS = 0xFF - }, - - .CDC_DCI_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_CDC_DCI, - .AlternateSetting = 0, - - .TotalEndpoints = 2, - - .Class = CDC_CSCP_CDCDataClass, - .SubClass = CDC_CSCP_NoDataSubclass, - .Protocol = CDC_CSCP_NoDataProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .CDC_DataOutEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = CDC_RX_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x05 - }, - - .CDC_DataInEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = CDC_TX_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x05 - } -}; - -/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. - */ -const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"Benito Arduino Programmer"); - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorNumber) - { - case STRING_ID_Language: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case STRING_ID_Manufacturer: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case STRING_ID_Product: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - - break; - } - - *DescriptorAddress = Address; - return Size; -} - diff --git a/lib/lufa/Projects/Benito/Descriptors.h b/lib/lufa/Projects/Benito/Descriptors.h deleted file mode 100644 index 453bb74cad..0000000000 --- a/lib/lufa/Projects/Benito/Descriptors.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior per |