diff options
Diffstat (limited to 'lib/lufa/Demos/Device/LowLevel/BulkVendor')
20 files changed, 0 insertions, 4116 deletions
diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c deleted file mode 100644 index fe7ad84bbb..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the Bulk Vendor demo. This file contains the main tasks of the demo and - * is responsible for the initial application hardware configuration. - */ - -#define INCLUDE_FROM_BULKVENDOR_C -#include "BulkVendor.h" - - -/** Main program entry point. This routine configures the hardware required by the application, then - * enters a loop to run the application tasks in sequence. - */ -int main(void) -{ - SetupHardware(); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - GlobalInterruptEnable(); - - for (;;) - { - USB_USBTask(); - - uint8_t ReceivedData[VENDOR_IO_EPSIZE]; - memset(ReceivedData, 0x00, sizeof(ReceivedData)); - - Endpoint_SelectEndpoint(VENDOR_OUT_EPADDR); - if (Endpoint_IsOUTReceived()) - { - Endpoint_Read_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL); - Endpoint_ClearOUT(); - - Endpoint_SelectEndpoint(VENDOR_IN_EPADDR); - Endpoint_Write_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL); - Endpoint_ClearIN(); - } - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ -#if (ARCH == ARCH_AVR8) - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); -#elif (ARCH == ARCH_XMEGA) - /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ - XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); - XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); - - /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ - XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); - XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); - - PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; -#endif - - /* Hardware Initialization */ - LEDs_Init(); - USB_Init(); -} - -/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */ -void EVENT_USB_Device_Connect(void) -{ - /* Indicate USB enumerating */ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via - * the status LEDs. - */ -void EVENT_USB_Device_Disconnect(void) -{ - /* Indicate USB not ready */ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration - * of the USB device after enumeration - the device endpoints are configured. - */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - bool ConfigSuccess = true; - - /* Setup Vendor Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_IN_EPADDR, EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1); - ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_OUT_EPADDR, EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1); - - /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); -} - -/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to - * the device from the USB host before passing along unhandled control requests to the library for processing - * internally. - */ -void EVENT_USB_Device_ControlRequest(void) -{ - // Process vendor specific control requests here -} diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.h b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.h deleted file mode 100644 index 3d74ac001a..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BulkVendor.c. - */ - -#ifndef _BULK_VENDOR_H_ -#define _BULK_VENDOR_H_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/wdt.h> - #include <avr/power.h> - #include <avr/interrupt.h> - - #include "Descriptors.h" - - #include <LUFA/Drivers/USB/USB.h> - #include <LUFA/Drivers/Board/LEDs.h> - #include <LUFA/Platform/Platform.h> - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ - #define LEDMASK_USB_BUSY LEDS_LED2 - - /* Function Prototypes: */ - void SetupHardware(void); - - void EVENT_USB_Device_Connect(void); - void EVENT_USB_Device_Disconnect(void); - void EVENT_USB_Device_ConfigurationChanged(void); - void EVENT_USB_Device_ControlRequest(void); - -#endif - diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt b/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt deleted file mode 100644 index d6688a9cdf..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt +++ /dev/null @@ -1,69 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Bulk Vendor Device Demo - * - * \section Sec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * \li Series 6 USB AVRs (AT90USBxxx6) - * \li Series 4 USB AVRs (ATMEGAxxU4) - * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) - * \li Series B XMEGA AVRs (ATXMEGAxxxBx) - * \li Series C XMEGA AVRs (ATXMEGAxxxCx) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * <table> - * <tr> - * <td><b>USB Mode:</b></td> - * <td>Device</td> - * </tr> - * <tr> - * <td><b>USB Class:</b></td> - * <td>Vendor (no official class)</td> - * </tr> - * <tr> - * <td><b>USB Subclass:</b></td> - * <td>Vendor (no official subclass)</td> - * </tr> - * <tr> - * <td><b>Relevant Standards:</b></td> - * <td>None</td> - * </tr> - * <tr> - * <td><b>Supported USB Speeds:</b></td> - * <td>Full Speed Mode</td> - * </tr> - * </table> - * - * \section Sec_Description Project Description: - * - * Bulk Vendor demonstration application. This gives a simple reference - * application for implementing a USB device that contains read/write bulk type - * endpoints, for implementing custom USB protocols. - * - * On start-up the system will automatically enumerate and echo back packets - * sent from the host. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * <table> - * <tr> - * <td> - * None - * </td> - * </tr> - * </table> - */ - diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h deleted file mode 100644 index 0ec4635eb0..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief LUFA Library Configuration Header File - * - * This header file is used to configure LUFA's compile time options, - * as an alternative to the compile time constants supplied through - * a makefile. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _LUFA_CONFIG_H_ -#define _LUFA_CONFIG_H_ - - #if (ARCH == ARCH_AVR8) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ -// #define ORDERED_EP_CONFIG - #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) - #define USB_DEVICE_ONLY -// #define USB_HOST_ONLY -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT -// #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ -// #define USE_RAM_DESCRIPTORS - #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS -// #define NO_INTERNAL_SERIAL - #define FIXED_CONTROL_ENDPOINT_SIZE 8 -// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} - #define FIXED_NUM_CONFIGURATIONS 1 -// #define CONTROL_ONLY_DEVICE - #define INTERRUPT_CONTROL_ENDPOINT -// #define NO_DEVICE_REMOTE_WAKEUP -// #define NO_DEVICE_SELF_POWER - - /* USB Host Mode Driver Related Tokens: */ -// #define HOST_STATE_AS_GPIOR {Insert Value Here} -// #define USB_HOST_TIMEOUT_MS {Insert Value Here} -// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} -// #define NO_AUTO_VBUS_MANAGEMENT -// #define INVERTED_VBUS_ENABLE_LINE - - #elif (ARCH == ARCH_XMEGA) - - /* Non-USB Related Configuration Tokens: */ -// #define DISABLE_TERMINAL_CODES - - /* USB Class Driver Related Tokens: */ -// #define HID_HOST_BOOT_PROTOCOL_ONLY -// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} -// #define HID_USAGE_STACK_DEPTH {Insert Value Here} -// #define HID_MAX_COLLECTIONS {Insert Value Here} -// #define HID_MAX_REPORTITEMS {Insert Value Here} -// #define HID_MAX_REPORT_IDS {Insert Value Here} -// #define NO_CLASS_DRIVER_AUTOFLUSH - - /* General USB Driver Related Tokens: */ - #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH) -// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} -// #define NO_LIMITED_CONTROLLER_CONNECT -// #define NO_SOF_EVENTS - - /* USB Device Mode Driver Related Tokens: */ -// #define USE_RAM_DESCRIPTORS - #define USE_FLASH_DESCRIPTORS -// #define USE_EEPROM_DESCRIPTORS -// #define NO_INTERNAL_SERIAL - #define FIXED_CONTROL_ENDPOINT_SIZE 8 -// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} - #define FIXED_NUM_CONFIGURATIONS 1 -// #define CONTROL_ONLY_DEVICE - #define MAX_ENDPOINT_INDEX 4 -// #define NO_DEVICE_REMOTE_WAKEUP -// #define NO_DEVICE_SELF_POWER - - #else - - #error Unsupported architecture for this LUFA configuration file. - - #endif -#endif diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.c b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.c deleted file mode 100644 index 9a4c2792b5..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - - -/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(1,1,0), - .Class = USB_CSCP_NoDeviceClass, - .SubClass = USB_CSCP_NoDeviceSubclass, - .Protocol = USB_CSCP_NoDeviceProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x206C, - .ReleaseNumber = VERSION_BCD(0,0,1), - - .ManufacturerStrIndex = STRING_ID_Manufacturer, - .ProductStrIndex = STRING_ID_Product, - .SerialNumStrIndex = USE_INTERNAL_SERIAL, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 1, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .Vendor_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = INTERFACE_ID_Vendor, - .AlternateSetting = 0, - - .TotalEndpoints = 2, - - .Class = 0xFF, - .SubClass = 0xFF, - .Protocol = 0xFF, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .Vendor_DataInEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = VENDOR_IN_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = VENDOR_IO_EPSIZE, - .PollingIntervalMS = 0x05 - }, - - .Vendor_DataOutEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = VENDOR_OUT_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = VENDOR_IO_EPSIZE, - .PollingIntervalMS = 0x05 - } -}; - -/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. - */ -const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Bulk Vendor Demo"); - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorNumber) - { - case STRING_ID_Language: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case STRING_ID_Manufacturer: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case STRING_ID_Product: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - - break; - } - - *DescriptorAddress = Address; - return Size; -} - diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.h b/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.h deleted file mode 100644 index 939717ea3f..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/Descriptors.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - - /* Includes: */ - #include <LUFA/Drivers/USB/USB.h> - - #include <avr/pgmspace.h> - - /* Macros: */ - /** Endpoint address of the Bulk Vendor device-to-host data IN endpoint. */ - #define VENDOR_IN_EPADDR (ENDPOINT_DIR_IN | 3) - - /** Endpoint address of the Bulk Vendor host-to-device data OUT endpoint. */ - #define VENDOR_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) - - /** Size in bytes of the Bulk Vendor data endpoints. */ - #define VENDOR_IO_EPSIZE 64 - - /* Type Defines: */ - /** Type define for the device configuration descriptor structure. This must be defined in the - * application code, as the configuration descriptor contains several sub-descriptors which - * vary between devices, and which describe the device's usage to the host. - */ - typedef struct - { - USB_Descriptor_Configuration_Header_t Config; - - // Vendor Interface - USB_Descriptor_Interface_t Vendor_Interface; - USB_Descriptor_Endpoint_t Vendor_DataInEndpoint; - USB_Descriptor_Endpoint_t Vendor_DataOutEndpoint; - } USB_Descriptor_Configuration_t; - - /** Enum for the device interface descriptor IDs within the device. Each interface descriptor - * should have a unique ID index associated with it, which can be used to refer to the - * interface from other descriptors. - */ - enum InterfaceDescriptors_t - { - INTERFACE_ID_Vendor = 0, /**< Vendor interface descriptor ID */ - }; - - /** Enum for the device string descriptor IDs within the device. Each string descriptor should - * have a unique ID index associated with it, which can be used to refer to the string from - * other descriptors. - */ - enum StringDescriptors_t - { - STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ - STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ - STRING_ID_Product = 2, /**< Product string ID */ - }; - - /* Function Prototypes: */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint16_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - -#endif - diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py b/lib/lufa/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py deleted file mode 100644 index fff8ecd780..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py +++ /dev/null @@ -1,67 +0,0 @@ -""" - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -""" - -""" - LUFA Bulk Vendor device demo host test script. This script will send and - receive a continuous stream of packets to/from to the device, to show - bidirectional communications. - - Requires the pyUSB library (http://sourceforge.net/projects/pyusb/). -""" - -import sys -from time import sleep -import usb.core -import usb.util - -# Bulk Vendor HID device VID and PID -device_vid = 0x03EB -device_pid = 0x206C -device_in_ep = 3 -device_out_ep = 4 - - -def get_vendor_device_handle(): - dev_handle = usb.core.find(idVendor=device_vid, idProduct=device_pid) - return dev_handle - - -def write(device, packet): - device.write(usb.util.ENDPOINT_OUT | device_out_ep, packet, 0, 1000) - print("Sent Packet: {0}".format(packet)) - - -def read(device): - packet = device.read(usb.util.ENDPOINT_IN | device_in_ep, 64, 0, 1000) - print("Received Packet: {0}".format(''.join([chr(x) for x in packet]))) - return packet - - -def main(): - vendor_device = get_vendor_device_handle() - - if vendor_device is None: - print("No valid Vendor device found.") - sys.exit(1) - - vendor_device.set_configuration() - - print("Connected to device 0x%04X/0x%04X - %s [%s]" % - (vendor_device.idVendor, vendor_device.idProduct, - usb.util.get_string(vendor_device, 255, vendor_device.iProduct), - usb.util.get_string(vendor_device, 255, vendor_device.iManufacturer))) - - x = 0 - while 1: - x = x + 1 % 255 - write(vendor_device, "TEST PACKET %d" % x) - read(vendor_device) - sleep(1) - -if __name__ == '__main__': - main() diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf Binary files differdeleted file mode 100644 index 32a29fdc50..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll Binary files differdeleted file mode 100644 index f916b08986..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys Binary files differdeleted file mode 100644 index 0718dfb7c0..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll Binary files differdeleted file mode 100644 index 292df27857..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys Binary files differdeleted file mode 100644 index f17914b8c4..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe Binary files differdeleted file mode 100644 index c38919ee50..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe Binary files differdeleted file mode 100644 index 030ec300c2..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe +++ /dev/null diff --git a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt b/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt deleted file mode 100644 index 56bb2cda25..0000000000 --- a/lib/lufa/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt +++ /dev/null @@ -1,851 +0,0 @@ -Copyright (c) 2002-2004 Stephan Meyer, <ste_meyer@web.de> -Copyright (c) 2000-2004 Johannes Erdfelt, <johannes@erdfelt.com> -Copyright (c) 2000-2004 Thomas Sailer, < |