9 files changed, 105 insertions, 6 deletions
diff --git a/layouts/community/ortho_4x12/wanleg/config.h b/layouts/community/ortho_4x12/wanleg/config.h
index 2c6fcc75f0..0d2cc591e3 100644
--- a/layouts/community/ortho_4x12/wanleg/config.h
+++ b/layouts/community/ortho_4x12/wanleg/config.h
@@ -12,4 +12,11 @@
 #define EE_HANDS
 #endif
 
+// set top left key as bootloader mode escape key on 4x4 48key layout
+#if defined(KEYBOARD_4x4)
+#define QMK_LED B0
+#define QMK_ESC_OUTPUT C6 // usually COL
+#define QMK_ESC_INPUT B2 // usually ROW
+#endif
+
 #endif
diff --git a/layouts/community/ortho_4x12/wanleg/keymap.c b/layouts/community/ortho_4x12/wanleg/keymap.c
index 8773001d0a..f6030469c0 100644
--- a/layouts/community/ortho_4x12/wanleg/keymap.c
+++ b/layouts/community/ortho_4x12/wanleg/keymap.c
@@ -13,7 +13,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______________Qwerty_Row__0_______________,
   _______________Qwerty_Row__1_______________,
   _______________Qwerty_Row__2_______________,
-  KC_LCTL, KC_LGUI, KC_LALT, GHERKIN, SUBTER, SH_T(KC_SPC), KC_SPC, SUPRA, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL
+  KC_LCTL, KC_LGUI, KC_LALT, GHERKIN, SUBTER, SH_T(KC_SPC), SH_T(KC_SPC), SUPRA, KC_RGUI, KC_RALT, GHERKIN, KC_RCTL
 ),
 #else
 [_GK] = LAYOUT_ortho_4x12_wrapper(
diff --git a/layouts/community/ortho_4x12/wanleg/readme.md b/layouts/community/ortho_4x12/wanleg/readme.md
index 2f89d1de61..1cd41d116d 100644
--- a/layouts/community/ortho_4x12/wanleg/readme.md
+++ b/layouts/community/ortho_4x12/wanleg/readme.md
@@ -16,9 +16,39 @@ Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Window
 ## Using QMK DFU  
 Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
 `make lets_split/rev2:<keymap>:dfu dfu=qmk`  
-The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina` 
+The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina`  
 
----
-# JJ40 
-## To Do
-- [ ] Mousekeys not working with Userspace for some reason (jj40 only)
-\ No newline at end of file
+# Let's Split LEDs  
+In `qmk_firmware/keyboards/lets_split/rev2/rev2.c`, replace contents with 
+```  
+#include "lets_split.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+	
+	//turn off LEDs on ProMicro
+   DDRD &= ~(1<<5);
+   PORTD &= ~(1<<5);
+
+   DDRB &= ~(1<<0);
+   PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+```  
+to turn off LEDs
diff --git a/layouts/community/ortho_4x12/wanleg/rules.mk b/layouts/community/ortho_4x12/wanleg/rules.mk
index 79929689cb..69f377a015 100644
--- a/layouts/community/ortho_4x12/wanleg/rules.mk
+++ b/layouts/community/ortho_4x12/wanleg/rules.mk
@@ -3,4 +3,8 @@ SWAP_HANDS_ENABLE = yes
 
 ifeq ($(strip $(KEYBOARD)), jj40)
 	SWAP_HANDS_ENABLE = no
+endif
+
+ifeq ($(strip $(KEYBOARD)), 4x4)
+	SWAP_HANDS_ENABLE = no
 endif
 \ No newline at end of file
diff --git a/layouts/community/ortho_5x10/layout.json b/layouts/community/ortho_5x10/layout.json
new file mode 100644
index 0000000000..00d8479523
--- /dev/null
+++ b/layouts/community/ortho_5x10/layout.json
@@ -0,0 +1,5 @@
+["","","","","","","","","",""],
+["","","","","","","","","",""],
+["","","","","","","","","",""],
+["","","","","","","","","",""],
+["","","","","","","","","",""]
diff --git a/layouts/community/ortho_5x10/readme.md b/layouts/community/ortho_5x10/readme.md
new file mode 100644
index 0000000000..5c94f8eca8
--- /dev/null
+++ b/layouts/community/ortho_5x10/readme.md
@@ -0,0 +1,3 @@
+# ortho_5x10
+
+    LAYOUT_ortho_5x10
diff --git a/layouts/community/ortho_5x10/wanleg/config.h b/layouts/community/ortho_5x10/wanleg/config.h
new file mode 100644
index 0000000000..2d24f2771b
--- /dev/null
+++ b/layouts/community/ortho_5x10/wanleg/config.h
@@ -0,0 +1,9 @@
+#pragma once
+
+//QMK DFU settings (ProMicro boards)
+// set top left key as bootloader mode escape key on Gherkin
+#if defined(KEYBOARD_5x5)
+#define QMK_LED B0
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B2 // usually ROW
+#endif
diff --git a/layouts/community/ortho_5x10/wanleg/keymap.c b/layouts/community/ortho_5x10/wanleg/keymap.c
new file mode 100644
index 0000000000..5d06e53ae4
--- /dev/null
+++ b/layouts/community/ortho_5x10/wanleg/keymap.c
@@ -0,0 +1,38 @@
+#include QMK_KEYBOARD_H
+#include "wanleg.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[gGK] = LAYOUT_ortho_5x10_wrapper(
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_Row_0_______________,
+  _______________Gherkin_Row_1_______________,
+  _______________Gherkin_Row_2_______________,
+  _______, _______, _______, gNUMBER, gETCETERA, KC_SPC,gDIRECTION, KC_RGUI, _______, _______
+),
+
+
+[gNUM] = LAYOUT_ortho_5x10_wrapper(
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_NUM_1_______________,
+  _______________Gherkin_NUM_2_______________,
+  _______, _______, _______, _______, _______, KC_ENT, KC_RSFT, KC_RGUI, _______, _______
+),
+
+[gDIR] = LAYOUT_ortho_5x10_wrapper(
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_DIR_0_______________,
+  _______________Gherkin_DIR_1_______________,
+  _______________Gherkin_DIR_2_______________,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
+[gETC] = LAYOUT_ortho_5x10_wrapper(
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_ETC_0_______________,
+  _______________Gherkin_ETC_1_______________,
+  _______________Gherkin_ETC_2_______________,
+  _______, _______, _______, _______, _______, LALT(LCTL(KC_DEL)), _______, _______, _______, _______
+),
+
+};
diff --git a/layouts/community/ortho_5x10/wanleg/rules.mk b/layouts/community/ortho_5x10/wanleg/rules.mk
new file mode 100644
index 0000000000..90841d2abe
--- /dev/null
+++ b/layouts/community/ortho_5x10/wanleg/rules.mk
@@ -0,0 +1,3 @@
+SWAP_HANDS_ENABLE = no
+
+BOOTLOADER = qmk-dfu
+\ No newline at end of file