1 files changed, 0 insertions, 106 deletions
diff --git a/layouts/community/ortho_4x12/bocaj/config.h b/layouts/community/ortho_4x12/bocaj/config.h
deleted file mode 100644
index 9a65684f35..0000000000
--- a/layouts/community/ortho_4x12/bocaj/config.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#pragma once
-
-#define LEADER_TIMEOUT 250
-#define LEADER_PER_KEY_TIMING
-
-#if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
-#    if defined(KEYBOARD_planck_light)
-#        define RGB_DI_PIN A0
-#        define RGBLED_NUM 13  // Number of LEDs
-#    endif
-#    define RGBLIGHT_HUE_STEP 12
-#    define RGBLIGHT_SAT_STEP 12
-#    define RGBLIGHT_VAL_STEP 12
-#    define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-#    define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-#    ifdef RGB_MATRIX_ENABLE
-#        define RGBLIGHT_DISABLE_KEYCODES
-#    endif
-#endif  // RGBLIGHT_ENABLE
-
-#ifdef RGB_MATRIX_ENABLE
-#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses (will slow down matrix scan by a lot)
-// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
-#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-// #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-// #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
-#    undef RGB_MATRIX_LED_PROCESS_LIMIT
-#    undef RGB_MATRIX_LED_FLUSH_LIMIT
-#endif
-
-#if defined(KEYBOARD_planck_ez)
-#    undef PRODUCT
-#    define PRODUCT Bocaj Hacked Planck EZ
-#endif
-
-#define EEPROM_I2C_RM24C512C
-
-#define ENCODER_DIRECTION_FLIP
-/*
- * MIDI options
- */
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-
-// #define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
-#define FB_ERM_LRA 1     /* For ERM:0 or LRA:1*/
-#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
-#define FB_LOOPGAIN 1    /* For  Low:0, Medium:1, High:2, Very High:3 */
-
-/* default 3V ERM vibration motor voltage and library*/
-#if FB_ERM_LRA == 0
-#    define RATED_VOLTAGE 3
-#    define V_RMS 2.3
-#    define V_PEAK 3.30
-/* Library Selection */
-#    define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
-/* default 2V LRA voltage and library */
-#elif FB_ERM_LRA == 1
-#    define RATED_VOLTAGE 2
-#    define V_RMS 2.0
-#    define V_PEAK 2.85
-#    define F_LRA 200
-/* Library Selection */
-#    define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-
-#endif
-
-/* Control 1 register settings */
-#define DRIVE_TIME 25
-#define AC_COUPLE 0
-#define STARTUP_BOOST 1
-
-/* Control 2 Settings */
-#define BIDIR_INPUT 1
-#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
-#define SAMPLE_TIME 3
-#define BLANKING_TIME 1
-#define IDISS_TIME 1
-
-/* Control 3 settings */
-#define NG_THRESH 2
-#define ERM_OPEN_LOOP 1
-#define SUPPLY_COMP_DIS 0
-#define DATA_FORMAT_RTO 0
-#define LRA_DRIVE_MODE 0
-#define N_PWM_ANALOG 0
-#define LRA_OPEN_LOOP 0
-/* Control 4 settings */
-#define ZC_DET_TIME 0
-#define AUTO_CAL_TIME 3