diff options
Diffstat (limited to 'keyboards')
| -rwxr-xr-x | keyboards/novelpad/config.h | 218 | ||||
| -rw-r--r-- | keyboards/novelpad/info.json | 27 | ||||
| -rwxr-xr-x | keyboards/novelpad/keymaps/default/keymap.c | 139 | ||||
| -rwxr-xr-x | keyboards/novelpad/novelpad.c | 1 | ||||
| -rwxr-xr-x | keyboards/novelpad/novelpad.h | 26 | ||||
| -rw-r--r-- | keyboards/novelpad/readme.md (renamed from keyboards/novelpad/README.md) | 2 | ||||
| -rwxr-xr-x | keyboards/novelpad/rules.mk | 45 |
7 files changed, 293 insertions, 165 deletions
diff --git a/keyboards/novelpad/config.h b/keyboards/novelpad/config.h index c9b6b91a59..a2d24d7f82 100755 --- a/keyboards/novelpad/config.h +++ b/keyboards/novelpad/config.h @@ -14,8 +14,8 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H + +#pragma once #include "config_common.h" @@ -31,35 +31,219 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 5 #define MATRIX_COLS 4 -/* key matrix pins */ +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ #define MATRIX_ROW_PINS { C2, C4, C5, C6, C7 } #define MATRIX_COL_PINS { D7, D6, D5, D4 } #define UNUSED_PINS -/* COL2ROW or ROW2COL */ +/* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ +#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 10 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 4 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE - /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* key combination for command */ -#define IS_COMMAND() ( \ - false \ -) +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE -#define BACKLIGHT_LEVELS 10 -#define BACKLIGHT_PIN B7 +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO -#ifdef RGBLIGHT_ENABLE -#define RGB_DI_PIN D3 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 -#endif +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line #endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/novelpad/info.json b/keyboards/novelpad/info.json index 7523bf5dda..4bd648754b 100644 --- a/keyboards/novelpad/info.json +++ b/keyboards/novelpad/info.json @@ -6,7 +6,32 @@ "height": 5, "layouts": { "LAYOUT_ortho_5x4": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}] + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":4} + ] } } } diff --git a/keyboards/novelpad/keymaps/default/keymap.c b/keyboards/novelpad/keymaps/default/keymap.c index 76e0937e6d..cbac67eaaa 100755 --- a/keyboards/novelpad/keymaps/default/keymap.c +++ b/keyboards/novelpad/keymaps/default/keymap.c @@ -14,111 +14,60 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ + #include QMK_KEYBOARD_H enum custom_keycodes { - BL = SAFE_RANGE, - WK_RED, - WK_GREEN, - WK_BLUE + WK_RED = SAFE_RANGE, + WK_GREEN, + WK_BLUE }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT( - KC_NLCK, KC_PSLS, KC_PAST, KC_ESC, - KC_P7, KC_P8, KC_P9, KC_PMNS, - KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, KC_TAB, - MO(1), KC_P0, KC_PDOT, KC_ENT - ), - - [1] = LAYOUT( - _______, BL, RGB_MODE_SWIRL, RESET, - RGB_TOG, RGB_MOD, RGB_MODE_PLAIN, RGB_MODE_SNAKE, - RGB_HUI, RGB_SAI, RGB_VAI, RGB_MODE_KNIGHT, - RGB_HUD, RGB_SAD, RGB_VAD, RGB_MODE_XMAS, - _______, WK_RED, WK_GREEN, WK_BLUE - ), - + [0] = LAYOUT( + KC_NLCK, KC_PSLS, KC_PAST, KC_ESC, + KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_TAB, + MO(1), KC_P0, KC_PDOT, KC_ENT + ), + + [1] = LAYOUT( + _______, BL_STEP, RGB_M_SW, RESET, + RGB_TOG, RGB_MOD, RGB_M_P, RGB_M_SN, + RGB_HUI, RGB_SAI, RGB_VAI, RGB_M_K, + RGB_HUD, RGB_SAD, RGB_VAD, RGB_M_X, + _______, WK_RED, WK_GREEN, WK_BLUE + ) }; -void matrix_init_user(void) { - - rgblight_setrgb(0,255,0); -} - -void matrix_scan_user(void) { +void keyboard_post_init_user(void) { + rgblight_setrgb(0, 255, 0); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case BL: - if (record->event.pressed) { -#ifdef BACKLIGHT_ENABLE - backlight_step(); -#endif + switch (keycode) { + case WK_RED: + if (record->event.pressed) { + rgblight_show_solid_color(0xFF, 0x00, 0x00); + } else { + rgblight_show_solid_color(0xFF, 0xFF, 0xFF); + } + return false; + case WK_GREEN: + if (record->event.pressed) { + rgblight_show_solid_color(0x00, 0xFF, 0x00); + } else { + rgblight_show_solid_color(0xFF, 0xFF, 0xFF); + } + return false; + case WK_BLUE: + if (record->event.pressed) { + rgblight_show_solid_color(0x00, 0x00, 0xFF); + } else { + rgblight_show_solid_color(0xFF, 0xFF, 0xFF); + } + return false; } - return false; - break; - case WK_RED: - if (record->event.pressed) { - rgblight_show_solid_color(0xFF, 0, 0); - } else { - rgblight_show_solid_color(0xFF, 0xFF, 0xFF); - } - return false; - break; - case WK_GREEN: - if (record->event.pressed) { - rgblight_show_solid_color(0, 0xFF, 0); - } else { - rgblight_show_solid_color(0xFF, 0xFF, 0xFF); - } - return false; - break; - case WK_BLUE: - if (record->event.pressed) { - rgblight_show_solid_color(0, 0, 0xFF); - } else { - rgblight_show_solid_color(0xFF, 0xFF, 0xFF); - } - return false; - break; - } - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - + return true; } diff --git a/keyboards/novelpad/novelpad.c b/keyboards/novelpad/novelpad.c index 719cb89d6a..9f6ee7dae4 100755 --- a/keyboards/novelpad/novelpad.c +++ b/keyboards/novelpad/novelpad.c @@ -14,4 +14,5 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ + #include "novelpad.h" diff --git a/keyboards/novelpad/novelpad.h b/keyboards/novelpad/novelpad.h index f5a0b95f59..6650a67223 100755 --- a/keyboards/novelpad/novelpad.h +++ b/keyboards/novelpad/novelpad.h @@ -14,25 +14,23 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef KB_H -#define KB_H + +#pragma once #include "quantum.h" #define LAYOUT_ortho_5x4( \ - K00, K01, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, \ - K30, K31, K32, K33, \ - K40, K41, K42, K43 \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43 \ ) { \ - { K00, K01, K02, K03 }, \ - { K10, K11, K12, K13 }, \ - { K20, K21, K22, K23 }, \ - { K30, K31, K32, K33 }, \ - { K40, K41, K42, K43 } \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 }, \ + { K40, K41, K42, K43 } \ } #define LAYOUT LAYOUT_ortho_5x4 - -#endif diff --git a/keyboards/novelpad/README.md b/keyboards/novelpad/readme.md index 5c73644a28..0cde8337ca 100644 --- a/keyboards/novelpad/README.md +++ b/keyboards/novelpad/readme.md @@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment): make novelpad:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/novelpad/rules.mk b/keyboards/novelpad/rules.mk index 8d35c6c05c..e77a0d6515 100755 --- a/keyboards/novelpad/rules.mk +++ b/keyboards/novelpad/rules.mk @@ -1,44 +1,15 @@ # MCU name MCU = atmega32u2 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu # Build Options |