diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/standaside/config.h | 204 | ||||
| -rw-r--r-- | keyboards/standaside/keymaps/default/config.h | 5 | ||||
| -rw-r--r-- | keyboards/standaside/keymaps/default/keymap.c | 77 | ||||
| -rw-r--r-- | keyboards/standaside/readme.md | 15 | ||||
| -rw-r--r-- | keyboards/standaside/rules.mk | 73 | ||||
| -rw-r--r-- | keyboards/standaside/standaside.c | 14 | ||||
| -rw-r--r-- | keyboards/standaside/standaside.h | 29 |
7 files changed, 417 insertions, 0 deletions
diff --git a/keyboards/standaside/config.h b/keyboards/standaside/config.h new file mode 100644 index 0000000000..fa3576ca5b --- /dev/null +++ b/keyboards/standaside/config.h @@ -0,0 +1,204 @@ + + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xF7E0 +#define PRODUCT_ID 0x0412 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Fate Everywhere +#define PRODUCT Stand Aside +#define DESCRIPTION A compact 60% keyboard + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 } +#define UNUSED_PINS {} + + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN C7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Enable RGB Underlighting + */ +#define RGB_DI_PIN C7 +#define RGBLED_NUM 12 +#define RGBLIGHT_ANIMATIONS + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + diff --git a/keyboards/standaside/keymaps/default/config.h b/keyboards/standaside/keymaps/default/config.h new file mode 100644 index 0000000000..d533d806c9 --- /dev/null +++ b/keyboards/standaside/keymaps/default/config.h @@ -0,0 +1,5 @@ + + +#pragma once + +// place overrides here diff --git a/keyboards/standaside/keymaps/default/keymap.c b/keyboards/standaside/keymaps/default/keymap.c new file mode 100644 index 0000000000..0f13cb7632 --- /dev/null +++ b/keyboards/standaside/keymaps/default/keymap.c @@ -0,0 +1,77 @@ + +#include QMK_KEYBOARD_H + +#define _MAIN 0 +#define _RAISE 1 +#define _LOWER 2 + +// Readability keycodes +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +/* MAIN + * .-----------------------------------------------------------------------------------------------------------------------------------------------. + * | TAB | Q | W | E | R | T | Y | U | I | O | P | Backsp | Delete | 7 | 8 | 9 | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | PgUp | 4 | 5 | 6 | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | SHIFT | Z | X | C | V | B | N | M | , | . | / | ENTER | PgDn | 1 | 2 | 3 | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LCTRL | PAUS | GUI | ALT | Lower | Space | Space | Raise | Left | Down | Up | Right | Shift | 0 | . | ENTER | + * '-----------------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_MAIN] = LAYOUT_ortho_4x16( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_DEL, KC_KP_7, KC_KP_8, KC_KP_9, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_PGUP, KC_KP_4, KC_KP_5, KC_KP_6, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_PGDN, KC_KP_1, KC_KP_2, KC_KP_3, + KC_LCTL, KC_PAUS, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RSFT, KC_KP_0, KC_KP_DOT, KC_PENT + ), + +/* RAISE + * .-----------------------------------------------------------------------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | Insert | | | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | - | = | [ | ] | \ | Home | | | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | | | | | PScr | End | | | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | Next | Vol- | Vol+ | Play | NumLok | | | | + * '-----------------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_RAISE] = LAYOUT_ortho_4x16( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_INS, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_END, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_NLCK, _______, _______, _______ + ), + +/* LOWER + * .-----------------------------------------------------------------------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | RGBPWR | Mode | Reset | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | HUE+ | SAT+ | VAL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | | HUE- | SAT- | VAL- | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | | | | Mute | | Plain | Rainbo | Larsen | + * '-----------------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_LOWER] = LAYOUT_ortho_4x16( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, RGB_TOG, RGB_MOD, RESET, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, RGB_HUI, RGB_SAI, RGB_VAI, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, RGB_M_P, RGB_M_R, RGB_M_K + ), + +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +}
\ No newline at end of file diff --git a/keyboards/standaside/readme.md b/keyboards/standaside/readme.md new file mode 100644 index 0000000000..ca1cfb2763 --- /dev/null +++ b/keyboards/standaside/readme.md @@ -0,0 +1,15 @@ +# Stand Aside + + + +A compact 60% keyboard designed by Fate Everywhere. Born out of the desire for a Planck with a numpad for technical work. Available for sale (kit and completed) once the store comes up. + +Keyboard Maintainer: [Fate Everywhere](https://github.com/fateeverywhere) +Hardware Supported: Mark 3 Stand Aside. +Hardware Availability: Seven Store (https://store.7storm.org). + +Make example for this keyboard (after setting up your build environment): + + make standaside:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk new file mode 100644 index 0000000000..a7ebc21fa4 --- /dev/null +++ b/keyboards/standaside/rules.mk @@ -0,0 +1,73 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel_dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +RGBLIGHT_ENABLE = yes # Enable RGB underlighting support + diff --git a/keyboards/standaside/standaside.c b/keyboards/standaside/standaside.c new file mode 100644 index 0000000000..904e92d335 --- /dev/null +++ b/keyboards/standaside/standaside.c @@ -0,0 +1,14 @@ + +#include "standaside.h" +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/standaside/standaside.h b/keyboards/standaside/standaside.h new file mode 100644 index 0000000000..b661696397 --- /dev/null +++ b/keyboards/standaside/standaside.h @@ -0,0 +1,29 @@ + +#ifndef STANDASIDE_H +#define STANDASIDE_H + +#include "quantum.h" +#define ___ KC_NO + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_ortho_4x16( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ + K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, \ + K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, K46, K47, \ + K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, K61, K62, K63 \ +) \ +{ \ + { K00, K02, K04, K06, K08, K10, K12, K14 }, \ + { K01, K03, K05, K07, K09, K11, K13, K15 }, \ + { K16, K18, K20, K22, K24, K26, K28, K30 }, \ + { K17, K19, K21, K23, K25, K27, K29, K31 }, \ + { K32, K34, K36, K38, K40, K42, K44, K46 }, \ + { K33, K35, K37, K39, K41, K43, K45, K47 }, \ + { K48, K50, K52, K54, K56, K58, K60, K62 }, \ + { K49, K51, K53, K55, K57, K59, K61, K63 } \ +} + +#endif |