diff options
Diffstat (limited to 'keyboards')
34 files changed, 144 insertions, 155 deletions
diff --git a/keyboards/40percentclub/ut47/post_rules.mk b/keyboards/40percentclub/ut47/post_rules.mk new file mode 100644 index 0000000000..7051ee413d --- /dev/null +++ b/keyboards/40percentclub/ut47/post_rules.mk @@ -0,0 +1,4 @@ +ifeq ($(strip $(LED_ENABLE)), yes) + OPT_DEFS += -DLED_ENABLE + SRC += led.c +endif diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index 4f0d0bdb2f..9c0e3a206c 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -24,8 +24,3 @@ AUDIO_ENABLE = no # Audio output on port C6 # custom matrix setup CUSTOM_MATRIX = yes SRC += matrix.c protocol/serial_uart.c - -ifeq ($(strip $(LED_ENABLE)), yes) - OPT_DEFS += -DLED_ENABLE - SRC += led.c -endif diff --git a/keyboards/converter/palm_usb/post_rules.mk b/keyboards/converter/palm_usb/post_rules.mk new file mode 100644 index 0000000000..9c11076701 --- /dev/null +++ b/keyboards/converter/palm_usb/post_rules.mk @@ -0,0 +1,7 @@ +ifdef HARDWARE_SERIAL + # Untested with palm_usb + SRC += protocol/serial_uart.c + OPT_DEFS += -DHARDWARE_SERIAL +else + SRC += protocol/serial_soft.c +endif diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk index ff1ddc8f49..dc8cf17400 100644 --- a/keyboards/converter/palm_usb/rules.mk +++ b/keyboards/converter/palm_usb/rules.mk @@ -25,12 +25,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes SRC += matrix.c -ifdef HARDWARE_SERIAL - # Untested with palm_usb - SRC += protocol/serial_uart.c - OPT_DEFS += -DHARDWARE_SERIAL -else - SRC += protocol/serial_soft.c -endif DEFAULT_FOLDER = converter/palm_usb/stowaway diff --git a/keyboards/converter/sun_usb/post_rules.mk b/keyboards/converter/sun_usb/post_rules.mk new file mode 100644 index 0000000000..2ea1f0a5bf --- /dev/null +++ b/keyboards/converter/sun_usb/post_rules.mk @@ -0,0 +1,6 @@ +ifdef HARDWARE_SERIAL + SRC += protocol/serial_uart.c + OPT_DEFS += -DHARDWARE_SERIAL +else + SRC += protocol/serial_soft.c +endif diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk index e863d25745..14dd57e1b7 100644 --- a/keyboards/converter/sun_usb/rules.mk +++ b/keyboards/converter/sun_usb/rules.mk @@ -25,11 +25,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes SRC += matrix.c led.c -ifdef HARDWARE_SERIAL - SRC += protocol/serial_uart.c - OPT_DEFS += -DHARDWARE_SERIAL -else - SRC += protocol/serial_soft.c -endif DEFAULT_FOLDER = converter/sun_usb/type5 diff --git a/keyboards/dm9records/ergoinu/post_rules.mk b/keyboards/dm9records/ergoinu/post_rules.mk new file mode 100644 index 0000000000..02aa48104c --- /dev/null +++ b/keyboards/dm9records/ergoinu/post_rules.mk @@ -0,0 +1,9 @@ +ifneq ($(strip $(ERGOINU)),) + ifeq ($(findstring promicroled, $(ERGOINU)), promicroled) + DISABLE_PROMICRO_LEDs = no + endif +endif + +ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes) + OPT_DEFS += -DDISABLE_PROMICRO_LEDs +endif diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk index e3362ea313..4d98df442b 100644 --- a/keyboards/dm9records/ergoinu/rules.mk +++ b/keyboards/dm9records/ergoinu/rules.mk @@ -29,13 +29,3 @@ SRC += matrix.c serial.c split_util.c # ergoinu configs DISABLE_PROMICRO_LEDs = yes - -ifneq ($(strip $(ERGOINU)),) - ifeq ($(findstring promicroled, $(ERGOINU)), promicroled) - DISABLE_PROMICRO_LEDs = no - endif -endif - -ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes) - OPT_DEFS += -DDISABLE_PROMICRO_LEDs -endif diff --git a/keyboards/ergotaco/post_rules.mk b/keyboards/ergotaco/post_rules.mk new file mode 100644 index 0000000000..0db3171b33 --- /dev/null +++ b/keyboards/ergotaco/post_rules.mk @@ -0,0 +1,8 @@ + +# A bunch of stuff that you shouldn't touch unless you +# know what you're doing. +# +# No touchy, capiche? +ifeq ($(strip $(DEBUG_MATRIX)), yes) + OPT_DEFS += -DDEBUG_MATRIX +endif diff --git a/keyboards/ergotaco/rules.mk b/keyboards/ergotaco/rules.mk index 9fe0992ffd..db236477b0 100644 --- a/keyboards/ergotaco/rules.mk +++ b/keyboards/ergotaco/rules.mk @@ -14,6 +14,3 @@ COMMAND_ENABLE = yes # # No touchy, capiche? SRC += matrix.c i2c_master.c -ifeq ($(strip $(DEBUG_MATRIX)), yes) - OPT_DEFS += -DDEBUG_MATRIX -endif diff --git a/keyboards/hhkb/ansi/post_rules.mk b/keyboards/hhkb/ansi/post_rules.mk new file mode 100644 index 0000000000..bc6ad5cd4c --- /dev/null +++ b/keyboards/hhkb/ansi/post_rules.mk @@ -0,0 +1,18 @@ +ifeq ($(strip $(HHKB_RN42_ENABLE)), yes) + +OPT_DEFS += -DHHKB_RN42_ENABLE + +# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT +# HHKB Alt controller. +RN42_DIR = ../rn42 + +SRC += serial_uart.c \ + ../rn42/suart.S \ + ../rn42/rn42.c \ + ../rn42/rn42_task.c \ + ../rn42/battery.c \ + ../rn42/main.c + +VPATH += $(RN42_DIR) + +endif diff --git a/keyboards/hhkb/ansi/rules.mk b/keyboards/hhkb/ansi/rules.mk index b0f17c93a0..56898e2602 100644 --- a/keyboards/hhkb/ansi/rules.mk +++ b/keyboards/hhkb/ansi/rules.mk @@ -33,26 +33,6 @@ MIDI_ENABLE = no # MIDI support # project specific files SRC = matrix.c -ifeq ($(strip $(HHKB_RN42_ENABLE)), yes) - -OPT_DEFS += -DHHKB_RN42_ENABLE - -# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT -# HHKB Alt controller. -RN42_DIR = ../rn42 - -SRC += serial_uart.c \ - ../rn42/suart.S \ - ../rn42/rn42.c \ - ../rn42/rn42_task.c \ - ../rn42/battery.c \ - ../rn42/main.c - -VPATH += $(RN42_DIR) - -endif - - # debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION # debug-on: all diff --git a/keyboards/hhkb/jp/post_rules.mk b/keyboards/hhkb/jp/post_rules.mk new file mode 100644 index 0000000000..bc6ad5cd4c --- /dev/null +++ b/keyboards/hhkb/jp/post_rules.mk @@ -0,0 +1,18 @@ +ifeq ($(strip $(HHKB_RN42_ENABLE)), yes) + +OPT_DEFS += -DHHKB_RN42_ENABLE + +# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT +# HHKB Alt controller. +RN42_DIR = ../rn42 + +SRC += serial_uart.c \ + ../rn42/suart.S \ + ../rn42/rn42.c \ + ../rn42/rn42_task.c \ + ../rn42/battery.c \ + ../rn42/main.c + +VPATH += $(RN42_DIR) + +endif diff --git a/keyboards/hhkb/jp/rules.mk b/keyboards/hhkb/jp/rules.mk index 50e2c2c412..9b5b0b48b0 100644 --- a/keyboards/hhkb/jp/rules.mk +++ b/keyboards/hhkb/jp/rules.mk @@ -33,26 +33,6 @@ MIDI_ENABLE = no # MIDI support # project specific files SRC = matrix.c -ifeq ($(strip $(HHKB_RN42_ENABLE)), yes) - -OPT_DEFS += -DHHKB_RN42_ENABLE - -# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT -# HHKB Alt controller. -RN42_DIR = ../rn42 - -SRC += serial_uart.c \ - ../rn42/suart.S \ - ../rn42/rn42.c \ - ../rn42/rn42_task.c \ - ../rn42/battery.c \ - ../rn42/main.c - -VPATH += $(RN42_DIR) - -endif - - # debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION # debug-on: all diff --git a/keyboards/lfkeyboards/lfk78/post_rules.mk b/keyboards/lfkeyboards/lfk78/post_rules.mk new file mode 100644 index 0000000000..03f975b9df --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/post_rules.mk @@ -0,0 +1,14 @@ +# Extra source files for IS3731 lighting +SRC += TWIlib.c issi.c lighting.c + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + +ifeq ($(strip $(CAPSLOCK_LED)), yes) + TMK_COMMON_DEFS += -DCAPSLOCK_LED +endif diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk index 81f532615f..972e09af52 100644 --- a/keyboards/lfkeyboards/lfk78/rules.mk +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -24,19 +24,4 @@ ISSI_ENABLE = yes # If the I2C pullup resistors aren't install thi WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms CAPSLOCK_LED = no # Toggle back light LED of Caps Lock -# Extra source files for IS3731 lighting -SRC = TWIlib.c issi.c lighting.c - -ifeq ($(strip $(ISSI_ENABLE)), yes) - TMK_COMMON_DEFS += -DISSI_ENABLE -endif - -ifeq ($(strip $(WATCHDOG_ENABLE)), yes) - TMK_COMMON_DEFS += -DWATCHDOG_ENABLE -endif - -ifeq ($(strip $(CAPSLOCK_LED)), yes) - TMK_COMMON_DEFS += -DCAPSLOCK_LED -endif - DEFAULT_FOLDER = lfkeyboards/lfk78/revj diff --git a/keyboards/lfkeyboards/lfk87/post_rules.mk b/keyboards/lfkeyboards/lfk87/post_rules.mk new file mode 100644 index 0000000000..563462dd99 --- /dev/null +++ b/keyboards/lfkeyboards/lfk87/post_rules.mk @@ -0,0 +1,13 @@ +ifeq ($(LFK_REV), A) + MCU = at90usb1286 +else + MCU = at90usb646 +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + OPT_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + OPT_DEFS += -DWATCHDOG_ENABLE +endif diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk index 7f5621b030..bc988f15aa 100644 --- a/keyboards/lfkeyboards/lfk87/rules.mk +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -6,11 +6,6 @@ # LFK_REV = C -ifeq ($(LFK_REV), A) - MCU = at90usb1286 -else - MCU = at90usb646 -endif BOOTLOADER = atmel-dfu OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV) @@ -42,13 +37,3 @@ TAP_DANCE_ENABLE = no ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms - - - -ifeq ($(strip $(ISSI_ENABLE)), yes) - OPT_DEFS += -DISSI_ENABLE -endif - -ifeq ($(strip $(WATCHDOG_ENABLE)), yes) - OPT_DEFS += -DWATCHDOG_ENABLE -endif diff --git a/keyboards/lfkeyboards/lfkpad/post_rules.mk b/keyboards/lfkeyboards/lfkpad/post_rules.mk new file mode 100644 index 0000000000..ad997587b2 --- /dev/null +++ b/keyboards/lfkeyboards/lfkpad/post_rules.mk @@ -0,0 +1,7 @@ +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index 942f11368a..392a0bdb9e 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -29,12 +29,4 @@ WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan() isn't run every SRC = TWIlib.c issi.c lighting.c -ifeq ($(strip $(ISSI_ENABLE)), yes) - TMK_COMMON_DEFS += -DISSI_ENABLE -endif - -ifeq ($(strip $(WATCHDOG_ENABLE)), yes) - TMK_COMMON_DEFS += -DWATCHDOG_ENABLE -endif - LAYOUTS = numpad_6x4 diff --git a/keyboards/lfkeyboards/mini1800/post_rules.mk b/keyboards/lfkeyboards/mini1800/post_rules.mk new file mode 100644 index 0000000000..f04e10e4a3 --- /dev/null +++ b/keyboards/lfkeyboards/mini1800/post_rules.mk @@ -0,0 +1,9 @@ +ifeq ($(LFK_REV), A) + MCU = at90usb1286 +else + MCU = at90usb646 +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + # TMK_COMMON_DEFS += -DISSI_ENABLE +endif diff --git a/keyboards/lfkeyboards/mini1800/rules.mk b/keyboards/lfkeyboards/mini1800/rules.mk index a9c29c4b91..c9a9b01054 100644 --- a/keyboards/lfkeyboards/mini1800/rules.mk +++ b/keyboards/lfkeyboards/mini1800/rules.mk @@ -7,21 +7,12 @@ # Set to A or C LFK_REV = C -ifeq ($(LFK_REV), A) - MCU = at90usb1286 -else - MCU = at90usb646 -endif BOOTLOADER = atmel-dfu OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV) # Extra source files for IS3731 lighting SRC = TWIlib.c issi.c lighting.c -ifeq ($(strip $(ISSI_ENABLE)), yes) - # TMK_COMMON_DEFS += -DISSI_ENABLE -endif - # Build Options # change yes to no to disable # diff --git a/keyboards/manta60/post_rules.mk b/keyboards/manta60/post_rules.mk new file mode 100644 index 0000000000..e26b52df30 --- /dev/null +++ b/keyboards/manta60/post_rules.mk @@ -0,0 +1,3 @@ +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif diff --git a/keyboards/manta60/rules.mk b/keyboards/manta60/rules.mk index db012a1551..dbd3ce3093 100644 --- a/keyboards/manta60/rules.mk +++ b/keyboards/manta60/rules.mk @@ -23,7 +23,3 @@ AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes IOS_DEVICE_ENABLE = no # connect to IOS device (iPad, iPhone) - -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -endif diff --git a/keyboards/mschwingen/modelm/post_rules.mk b/keyboards/mschwingen/modelm/post_rules.mk new file mode 100644 index 0000000000..a1c2040f4c --- /dev/null +++ b/keyboards/mschwingen/modelm/post_rules.mk @@ -0,0 +1,3 @@ +ifeq ($(strip $(UART_DEBUG)), yes) + OPT_DEFS += -DUART_DEBUG +endif diff --git a/keyboards/mschwingen/modelm/rules.mk b/keyboards/mschwingen/modelm/rules.mk index ef70f5449c..d8bcf9b4ad 100644 --- a/keyboards/mschwingen/modelm/rules.mk +++ b/keyboards/mschwingen/modelm/rules.mk @@ -36,8 +36,4 @@ OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS28 LTO_ENABLE = yes -ifeq ($(strip $(UART_DEBUG)), yes) - OPT_DEFS += -DUART_DEBUG -endif - DEFAULT_FOLDER = mschwingen/modelm/led_wired diff --git a/keyboards/newgame40/post_rules.mk b/keyboards/newgame40/post_rules.mk new file mode 100644 index 0000000000..68229fe12b --- /dev/null +++ b/keyboards/newgame40/post_rules.mk @@ -0,0 +1,3 @@ +ifeq ($(strip $(IOS_DEVICE_ENABLE )), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif diff --git a/keyboards/newgame40/rules.mk b/keyboards/newgame40/rules.mk index 87d565cff4..4b580c7d2d 100644 --- a/keyboards/newgame40/rules.mk +++ b/keyboards/newgame40/rules.mk @@ -21,10 +21,6 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. IOS_DEVICE_ENABLE = no # connect to IOS Device - ifeq ($(strip $(IOS_DEVICE_ENABLE )), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE - endif - # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/numatreus/post_rules.mk b/keyboards/numatreus/post_rules.mk new file mode 100644 index 0000000000..1f49875d0f --- /dev/null +++ b/keyboards/numatreus/post_rules.mk @@ -0,0 +1,3 @@ +ifeq ($(strip $(LED_ANIMATIONS)), yes) + OPT_DEFS += -DLED_ANIMATIONS +endif diff --git a/keyboards/numatreus/rules.mk b/keyboards/numatreus/rules.mk index 1dd016ab0d..f9d5498961 100644 --- a/keyboards/numatreus/rules.mk +++ b/keyboards/numatreus/rules.mk @@ -19,9 +19,5 @@ UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = no LED_ANIMATIONS = no -ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DLED_ANIMATIONS -endif - # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/rgbkb/zen/post_rules.mk b/keyboards/rgbkb/zen/post_rules.mk new file mode 100644 index 0000000000..3ddb449efa --- /dev/null +++ b/keyboards/rgbkb/zen/post_rules.mk @@ -0,0 +1,14 @@ +ifeq ($(strip $(CTPC)), yes) + CONVERT_TO_PROTON_C=yes +endif + +ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) + SPLIT_KEYBOARD = no # currently unsupported on ARM + RGBLIGHT_ENABLE = no # currently unsupported on ARM + + EXTRAFLAGS += -DUSE_PROTON_C +else + # Currently moved to Pro Micro only section because of lack of Proton-C support + SPLIT_KEYBOARD = yes + RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +endif diff --git a/keyboards/rgbkb/zen/rev2/post_rules.mk b/keyboards/rgbkb/zen/rev2/post_rules.mk new file mode 100644 index 0000000000..2a4397e980 --- /dev/null +++ b/keyboards/rgbkb/zen/rev2/post_rules.mk @@ -0,0 +1,5 @@ +# Setup so that OLED can be turned on/off easily +ifeq ($(strip $(OLED_ENABLE)), yes) + # Custom local font file + OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" +endif diff --git a/keyboards/rgbkb/zen/rev2/rules.mk b/keyboards/rgbkb/zen/rev2/rules.mk index 9bb8b8cd0d..6dd9d2e270 100644 --- a/keyboards/rgbkb/zen/rev2/rules.mk +++ b/keyboards/rgbkb/zen/rev2/rules.mk @@ -1,9 +1,3 @@ ENCODER_ENABLE = yes OLED_ENABLE = no - -# Setup so that OLED can be turned on/off easily -ifeq ($(strip $(OLED_ENABLE)), yes) - # Custom local font file - OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" -endif diff --git a/keyboards/rgbkb/zen/rules.mk b/keyboards/rgbkb/zen/rules.mk index c18c84be54..0bf7eae653 100644 --- a/keyboards/rgbkb/zen/rules.mk +++ b/keyboards/rgbkb/zen/rules.mk @@ -4,21 +4,6 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = caterina -ifeq ($(strip $(CTPC)), yes) - CONVERT_TO_PROTON_C=yes -endif - -ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) - SPLIT_KEYBOARD = no # currently unsupported on ARM - RGBLIGHT_ENABLE = no # currently unsupported on ARM - - EXTRAFLAGS += -DUSE_PROTON_C -else - # Currently moved to Pro Micro only section because of lack of Proton-C support - SPLIT_KEYBOARD = yes - RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -endif - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically |