diff options
Diffstat (limited to 'keyboards')
18 files changed, 816 insertions, 0 deletions
diff --git a/keyboards/gray_studio/think65/hotswap/config.h b/keyboards/gray_studio/think65/hotswap/config.h new file mode 100644 index 0000000000..fc1734146d --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2019 MechMerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Gray Studio +#define PRODUCT THINK6.5 +#define DESCRIPTION 65% 6.5 degree custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 } +#define MATRIX_COL_PINS { D1, D0, D2, D3, D5, D4, D6, D7, B4, B5, F0, F1, B6, F4, F5, F6 } + +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 22 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file diff --git a/keyboards/gray_studio/think65/hotswap/hotswap.c b/keyboards/gray_studio/think65/hotswap/hotswap.c new file mode 100644 index 0000000000..07cdc8b1f7 --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/hotswap.c @@ -0,0 +1,71 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "hotswap.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + setPinOutput(C6); + setPinOutput(C7); + setPinOutput(F7); + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(C7); + } else { + writePinHigh(C7); + } + + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(C6); + } else { + writePinHigh(C6); + } + + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(F7); + } else { + writePinHigh(F7); + } + + led_set_user(usb_led); +} + diff --git a/keyboards/gray_studio/think65/hotswap/hotswap.h b/keyboards/gray_studio/think65/hotswap/hotswap.h new file mode 100644 index 0000000000..f6087e39e6 --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/hotswap.h @@ -0,0 +1,35 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_65_ansi_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \ + K40, K41, K43, K46, K4A, K4B, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F }, \ + { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \ + { KC_NO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E, K4F }, \ +} + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file diff --git a/keyboards/gray_studio/think65/hotswap/info.json b/keyboards/gray_studio/think65/hotswap/info.json new file mode 100644 index 0000000000..6047c4f4a2 --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "THINK6.5", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_65_ansi_blocker": { + "key_count": 67, + "layout": [ + {"label":"K00 (B0,D1)", "x":0, "y":0}, + {"label":"K01 (B0,D0)", "x":1, "y":0}, + {"label":"K02 (B0,D2)", "x":2, "y":0}, + {"label":"K03 (B0,D3)", "x":3, "y":0}, + {"label":"K04 (B0,D5)", "x":4, "y":0}, + {"label":"K05 (B0,D4)", "x":5, "y":0}, + {"label":"K06 (B0,D6)", "x":6, "y":0}, + {"label":"K07 (B0,D7)", "x":7, "y":0}, + {"label":"K08 (B0,B4)", "x":8, "y":0}, + {"label":"K09 (B0,B5)", "x":9, "y":0}, + {"label":"K0A (B0,F0)", "x":10, "y":0}, + {"label":"K0B (B0,F1)", "x":11, "y":0}, + {"label":"K0C (B0,B6)", "x":12, "y":0}, + {"label":"K0E (B0,F5)", "x":13, "y":0, "w":2}, + {"label":"K0F (B0,F6)", "x":15, "y":0}, + {"label":"K10 (B1,D1)", "x":0, "y":1, "w":1.5}, + {"label":"K12 (B1,D2)", "x":1.5, "y":1}, + {"label":"K13 (B1,D3)", "x":2.5, "y":1}, + {"label":"K14 (B1,D5)", "x":3.5, "y":1}, + {"label":"K15 (B1,D4)", "x":4.5, "y":1}, + {"label":"K16 (B1,D6)", "x":5.5, "y":1}, + {"label":"K17 (B1,D7)", "x":6.5, "y":1}, + {"label":"K18 (B1,B4)", "x":7.5, "y":1}, + {"label":"K19 (B1,B5)", "x":8.5, "y":1}, + {"label":"K1A (B1,F0)", "x":9.5, "y":1}, + {"label":"K1B (B1,F1)", "x":10.5, "y":1}, + {"label":"K1C (B1,B6)", "x":11.5, "y":1}, + {"label":"K1D (B1,F4)", "x":12.5, "y":1}, + {"label":"K1E (B1,F5)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1F (B1,F6)", "x":15, "y":1}, + {"label":"K20 (B2,D1)", "x":0, "y":2, "w":1.75}, + {"label":"K22 (B2,D2)", "x":1.75, "y":2}, + {"label":"K23 (B2,D3)", "x":2.75, "y":2}, + {"label":"K24 (B2,D5)", "x":3.75, "y":2}, + {"label":"K25 (B2,D4)", "x":4.75, "y":2}, + {"label":"K26 (B2,D6)", "x":5.75, "y":2}, + {"label":"K27 (B2,D7)", "x":6.75, "y":2}, + {"label":"K28 (B2,B4)", "x":7.75, "y":2}, + {"label":"K29 (B2,B5)", "x":8.75, "y":2}, + {"label":"K2A (B2,F0)", "x":9.75, "y":2}, + {"label":"K2B (B2,F1)", "x":10.75, "y":2}, + {"label":"K2C (B2,B6)", "x":11.75, "y":2}, + {"label":"K2D (B2,F4)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2F (B2,F6)", "x":15, "y":2}, + {"label":"K31 (B3,D0)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (B3,D2)", "x":2.25, "y":3}, + {"label":"K33 (B3,D3)", "x":3.25, "y":3}, + {"label":"K34 (B3,D5)", "x":4.25, "y":3}, + {"label":"K35 (B3,D4)", "x":5.25, "y":3}, + {"label":"K36 (B3,D6)", "x":6.25, "y":3}, + {"label":"K37 (B3,D7)", "x":7.25, "y":3}, + {"label":"K38 (B3,B4)", "x":8.25, "y":3}, + {"label":"K39 (B3,B5)", "x":9.25, "y":3}, + {"label":"K3A (B3,F0)", "x":10.25, "y":3}, + {"label":"K3B (B3,F1)", "x":11.25, "y":3}, + {"label":"K3D (B3,F4)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3E (B3,F5)", "x":14, "y":3}, + {"label":"K3F (B3,F6)", "x":15, "y":3}, + {"label":"K40 (E6,D1)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (E6,D0)", "x":1.25, "y":4, "w":1.25}, + {"label":"K43 (E6,D3)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (E6,F0)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (E6,F1)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4D (E6,F4)", "x":13, "y":4}, + {"label":"K4E (E6,F5)", "x":14, "y":4}, + {"label":"K4F (E6,F6)", "x":15, "y":4} + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +}
\ No newline at end of file diff --git a/keyboards/gray_studio/think65/hotswap/keymaps/default/config.h b/keyboards/gray_studio/think65/hotswap/keymaps/default/config.h new file mode 100644 index 0000000000..26c6d6ade1 --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/gray_studio/think65/hotswap/keymaps/default/keymap.c b/keyboards/gray_studio/think65/hotswap/keymaps/default/keymap.c new file mode 100644 index 0000000000..187f68c5c0 --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_blocker( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/gray_studio/think65/hotswap/keymaps/default/readme.md b/keyboards/gray_studio/think65/hotswap/keymaps/default/readme.md new file mode 100644 index 0000000000..438e10e291 --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for think65 diff --git a/keyboards/gray_studio/think65/hotswap/readme.md b/keyboards/gray_studio/think65/hotswap/readme.md new file mode 100644 index 0000000000..1dee91509a --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/readme.md @@ -0,0 +1,15 @@ +# Think6.5 Hotswap + +65% board with 6.5 degree angle ran by Airpotter and Oldcat. PCB Manufactured by DEMO Studio and Keyboard manufactured by Gray Studio. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Think6.5 Hotswap PCB +Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=100166.0) + +**Note:** The `LAYOUT_65_ansi_blocker` LAYOUT macro utilizes the same pins and switch matrix as the soldered (compatible) version. Any firmware made with this LAYOUT macro can be flashed on both the Solder (Compatible) version and the Hotswap version of the Think6.5. + +Make example for this keyboard (after setting up your build environment): + + make gray_studio/think65/hotswap:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gray_studio/think65/hotswap/rules.mk b/keyboards/gray_studio/think65/hotswap/rules.mk new file mode 100644 index 0000000000..2d789ff59a --- /dev/null +++ b/keyboards/gray_studio/think65/hotswap/rules.mk @@ -0,0 +1,40 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs + +LINK_TIME_OPTIMIZATION_ENABLE = yes + +LAYOUTS = 65_ansi_blocker + +# generated by KBFirmware JSON to QMK Parser +# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/gray_studio/think65/solder/config.h b/keyboards/gray_studio/think65/solder/config.h new file mode 100644 index 0000000000..cc8892a116 --- /dev/null +++ b/keyboards/gray_studio/think65/solder/config.h @@ -0,0 +1,73 @@ +/* +Copyright 2019 MechMerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Gray Studio +#define PRODUCT THINK6.5 +#define DESCRIPTION 65% 6.5 degree custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + // 0 1 2 3 4 5 6 7 8 9 A B C D E F +#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 } +#define MATRIX_COL_PINS { D1, D0, D2, D3, D5, D4, D6, D7, B4, B5, F0, F1, B6, F4, F5, F6 } + +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 22 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/
\ No newline at end of file diff --git a/keyboards/gray_studio/think65/solder/info.json b/keyboards/gray_studio/think65/solder/info.json new file mode 100644 index 0000000000..0be5042538 --- /dev/null +++ b/keyboards/gray_studio/think65/solder/info.json @@ -0,0 +1,157 @@ +{ + "keyboard_name": "THINK6.5", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_65_ansi_blocker": { + "key_count": 67, + "layout": [ + {"label":"K00 (B0,D1)", "x":0, "y":0}, + {"label":"K01 (B0,D0)", "x":1, "y":0}, + {"label":"K02 (B0,D2)", "x":2, "y":0}, + {"label":"K03 (B0,D3)", "x":3, "y":0}, + {"label":"K04 (B0,D5)", "x":4, "y":0}, + {"label":"K05 (B0,D4)", "x":5, "y":0}, + {"label":"K06 (B0,D6)", "x":6, "y":0}, + {"label":"K07 (B0,D7)", "x":7, "y":0}, + {"label":"K08 (B0,B4)", "x":8, "y":0}, + {"label":"K09 (B0,B5)", "x":9, "y":0}, + {"label":"K0A (B0,F0)", "x":10, "y":0}, + {"label":"K0B (B0,F1)", "x":11, "y":0}, + {"label":"K0C (B0,B6)", "x":12, "y":0}, + {"label":"K0E (B0,F5)", "x":13, "y":0, "w":2}, + {"label":"K0F (B0,F6)", "x":15, "y":0}, + {"label":"K10 (B1,D1)", "x":0, "y":1, "w":1.5}, + {"label":"K12 (B1,D2)", "x":1.5, "y":1}, + {"label":"K13 (B1,D3)", "x":2.5, "y":1}, + {"label":"K14 (B1,D5)", "x":3.5, "y":1}, + {"label":"K15 (B1,D4)", "x":4.5, "y":1}, + {"label":"K16 (B1,D6)", "x":5.5, "y":1}, + {"label":"K17 (B1,D7)", "x":6.5, "y":1}, + {"label":"K18 (B1,B4)", "x":7.5, "y":1}, + {"label":"K19 (B1,B5)", "x":8.5, "y":1}, + {"label":"K1A (B1,F0)", "x":9.5, "y":1}, + {"label":"K1B (B1,F1)", "x":10.5, "y":1}, + {"label":"K1C (B1,B6)", "x":11.5, "y":1}, + {"label":"K1D (B1,F4)", "x":12.5, "y":1}, + {"label":"K1E (B1,F5)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1F (B1,F6)", "x":15, "y":1}, + {"label":"K20 (B2,D1)", "x":0, "y":2, "w":1.75}, + {"label":"K22 (B2,D2)", "x":1.75, "y":2}, + {"label":"K23 (B2,D3)", "x":2.75, "y":2}, + {"label":"K24 (B2,D5)", "x":3.75, "y":2}, + {"label":"K25 (B2,D4)", "x":4.75, "y":2}, + {"label":"K26 (B2,D6)", "x":5.75, "y":2}, + {"label":"K27 (B2,D7)", "x":6.75, "y":2}, + {"label":"K28 (B2,B4)", "x":7.75, "y":2}, + {"label":"K29 (B2,B5)", "x":8.75, "y":2}, + {"label":"K2A (B2,F0)", "x":9.75, "y":2}, + {"label":"K2B (B2,F1)", "x":10.75, "y":2}, + {"label":"K2C (B2,B6)", "x":11.75, "y":2}, + {"label":"K2D (B2,F4)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2F (B2,F6)", "x":15, "y":2}, + {"label":"K31 (B3,D0)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (B3,D2)", "x":2.25, "y":3}, + {"label":"K33 (B3,D3)", "x":3.25, "y":3}, + {"label":"K34 (B3,D5)", "x":4.25, "y":3}, + {"label":"K35 (B3,D4)", "x":5.25, "y":3}, + {"label":"K36 (B3,D6)", "x":6.25, "y":3}, + {"label":"K37 (B3,D7)", "x":7.25, "y":3}, + {"label":"K38 (B3,B4)", "x":8.25, "y":3}, + {"label":"K39 (B3,B5)", "x":9.25, "y":3}, + {"label":"K3A (B3,F0)", "x":10.25, "y":3}, + {"label":"K3B (B3,F1)", "x":11.25, "y":3}, + {"label":"K3D (B3,F4)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3E (B3,F5)", "x":14, "y":3}, + {"label":"K3F (B3,F6)", "x":15, "y":3}, + {"label":"K40 (E6,D1)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (E6,D0)", "x":1.25, "y":4, "w":1.25}, + {"label":"K43 (E6,D3)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (E6,F0)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (E6,F1)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4D (E6,F4)", "x":13, "y":4}, + {"label":"K4E (E6,F5)", "x":14, "y":4}, + {"label":"K4F (E6,F6)", "x":15, "y":4} + ] + }, + + "LAYOUT_all": { + "key_count": 69, + "layout": [ + {"label":"K00 (B0,D1)", "x":0, "y":0}, + {"label":"K01 (B0,D0)", "x":1, "y":0}, + {"label":"K02 (B0,D2)", "x":2, "y":0}, + {"label":"K03 (B0,D3)", "x":3, "y":0}, + {"label":"K04 (B0,D5)", "x":4, "y":0}, + {"label":"K05 (B0,D4)", "x":5, "y":0}, + {"label":"K06 (B0,D6)", "x":6, "y":0}, + {"label":"K07 (B0,D7)", "x":7, "y":0}, + {"label":"K08 (B0,B4)", "x":8, "y":0}, + {"label":"K09 (B0,B5)", "x":9, "y":0}, + {"label":"K0A (B0,F0)", "x":10, "y":0}, + {"label":"K0B (B0,F1)", "x":11, "y":0}, + {"label":"K0C (B0,B6)", "x":12, "y":0}, + {"label":"K0D (B0,F4)", "x":13, "y":0}, + {"label":"K0E (B0,F5)", "x":14, "y":0}, + {"label":"K0F (B0,F6)", "x":15, "y":0}, + {"label":"K10 (B1,D1)", "x":0, "y":1, "w":1.5}, + {"label":"K12 (B1,D2)", "x":1.5, "y":1}, + {"label":"K13 (B1,D3)", "x":2.5, "y":1}, + {"label":"K14 (B1,D5)", "x":3.5, "y":1}, + {"label":"K15 (B1,D4)", "x":4.5, "y":1}, + {"label":"K16 (B1,D6)", "x":5.5, "y":1}, + {"label":"K17 (B1,D7)", "x":6.5, "y":1}, + {"label":"K18 (B1,B4)", "x":7.5, "y":1}, + {"label":"K19 (B1,B5)", "x":8.5, "y":1}, + {"label":"K1A (B1,F0)", "x":9.5, "y":1}, + {"label":"K1B (B1,F1)", "x":10.5, "y":1}, + {"label":"K1C (B1,B6)", "x":11.5, "y":1}, + {"label":"K1D (B1,F4)", "x":12.5, "y":1}, + {"label":"K1E (B1,F5)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1F (B1,F6)", "x":15, "y":1}, + {"label":"K20 (B2,D1)", "x":0, "y":2, "w":1.75}, + {"label":"K22 (B2,D2)", "x":1.75, "y":2}, + {"label":"K23 (B2,D3)", "x":2.75, "y":2}, + {"label":"K24 (B2,D5)", "x":3.75, "y":2}, + {"label":"K25 (B2,D4)", "x":4.75, "y":2}, + {"label":"K26 (B2,D6)", "x":5.75, "y":2}, + {"label":"K27 (B2,D7)", "x":6.75, "y":2}, + {"label":"K28 (B2,B4)", "x":7.75, "y":2}, + {"label":"K29 (B2,B5)", "x":8.75, "y":2}, + {"label":"K2A (B2,F0)", "x":9.75, "y":2}, + {"label":"K2B (B2,F1)", "x":10.75, "y":2}, + {"label":"K2C (B2,B6)", "x":11.75, "y":2}, + {"label":"K2D (B2,F4)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2F (B2,F6)", "x":15, "y":2}, + {"label":"K30 (B3,D1)", "x":0, "y":3, "w":1.25}, + {"label":"K31 (B3,D0)", "x":1.25, "y":3}, + {"label":"K32 (B3,D2)", "x":2.25, "y":3}, + {"label":"K33 (B3,D3)", "x":3.25, "y":3}, + {"label":"K34 (B3,D5)", "x":4.25, "y":3}, + {"label":"K35 (B3,D4)", "x":5.25, "y":3}, + {"label":"K36 (B3,D6)", "x":6.25, "y":3}, + {"label":"K37 (B3,D7)", "x":7.25, "y":3}, + {"label":"K38 (B3,B4)", "x":8.25, "y":3}, + {"label":"K39 (B3,B5)", "x":9.25, "y":3}, + {"label":"K3A (B3,F0)", "x":10.25, "y":3}, + {"label":"K3B (B3,F1)", "x":11.25, "y":3}, + {"label":"K3D (B3,F4)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3E (B3,F5)", "x":14, "y":3}, + {"label":"K3F (B3,F6)", "x":15, "y":3}, + {"label":"K40 (E6,D1)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (E6,D0)", "x":1.25, "y":4, "w":1.25}, + {"label":"K43 (E6,D3)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (E6,F0)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (E6,F1)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4D (E6,F4)", "x":13, "y":4}, + {"label":"K4E (E6,F5)", "x":14, "y":4}, + {"label":"K4F (E6,F6)", "x":15, "y":4} + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +}
\ No newline at end of file diff --git a/keyboards/gray_studio/think65/solder/keymaps/default/config.h b/keyboards/gray_studio/think65/solder/keymaps/default/config.h new file mode 100644 index 0000000000..26c6d6ade1 --- /dev/null +++ b/keyboards/gray_studio/think65/solder/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/gray_studio/think65/solder/keymaps/default/keymap.c b/keyboards/gray_studio/think65/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..187f68c5c0 --- /dev/null +++ b/keyboards/gray_studio/think65/solder/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_blocker( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/gray_studio/think65/solder/keymaps/default/readme.md b/keyboards/gray_studio/think65/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..438e10e291 --- /dev/null +++ b/keyboards/gray_studio/think65/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for think65 diff --git a/keyboards/gray_studio/think65/solder/readme.md b/keyboards/gray_studio/think65/solder/readme.md new file mode 100644 index 0000000000..e8636bf8ae --- /dev/null +++ b/keyboards/gray_studio/think65/solder/readme.md @@ -0,0 +1,17 @@ +# Think6.5 Solder (Compatible) + +65% board with 6.5 degree angle ran by Airpotter and Oldcat. PCB Manufactured by DEMO Studio and Keyboard manufactured by Gray Studio. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Think6.5 Compatible PCB +Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=100166.0) + +**Note:** The `LAYOUT_65_ansi_blocker` LAY |