diff options
Diffstat (limited to 'keyboards')
29 files changed, 852 insertions, 0 deletions
diff --git a/keyboards/mechlovin/zed65/config.h b/keyboards/mechlovin/zed65/config.h new file mode 100644 index 0000000000..b93b4900e0 --- /dev/null +++ b/keyboards/mechlovin/zed65/config.h @@ -0,0 +1,108 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +#define LED_CAPS_LOCK_PIN C14 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +//#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mechlovin/zed65/readme.md b/keyboards/mechlovin/zed65/readme.md new file mode 100644 index 0000000000..3dc4b4cf67 --- /dev/null +++ b/keyboards/mechlovin/zed65/readme.md @@ -0,0 +1,25 @@ +# Zed65 + +Mechlovin's 65% PCB Platform, which works as the base for our 65%-layout PCB designs. + +* Keyboard Maintainer: [Mechlovin' Studio](https://github.com/mechlovin) +* Hardware Supported: Zed65 Rev.1, APM32F103 +* Hardware Availability: [Mechlovin' Store](https://mechlovin.studio/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/zed65:default + +Flashing example for this keyboard: + + make mechlovin/zed65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/mechlovin/zed65/retro66/config.h b/keyboards/mechlovin/zed65/retro66/config.h new file mode 100644 index 0000000000..7609b34024 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/config.h @@ -0,0 +1,33 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +#define MATRIX_ROW_PINS { B13, B14, A8, A1, A0 } +#define MATRIX_COL_PINS { B11, B12, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2, B3, A15, B5 } + + +// Number of encoders + +#define ENCODERS_PAD_A { B4, B6 } +#define ENCODERS_PAD_B { B8, B9 } + + +#define ENCODER_RESOLUTION 4 +#define TAP_CODE_DELAY 10
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/retro66/info.json b/keyboards/mechlovin/zed65/retro66/info.json new file mode 100644 index 0000000000..a40bee98dd --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "Retro66", + "manufacturer": "Mechlovin Studio", + "url": "", + "maintainer": "Mechlovin' Studio", + "usb": { + "vid": "0x4D4C", + "pid": "0x6601", + "device_version": "0.0.1" + }, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.75, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.75, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"\u2191", "x":14.75, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":4, "w":1.25}, {"label":"\u2190", "x":13.75, "y":4}, {"label":"\u2193", "x":14.75, "y":4}, {"label":"\u2192", "x":15.75, "y":4}] + }, + "LAYOUT_blocker": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.75, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.75, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"\u2191", "x":14.75, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":2.25, "y":4, "w":1.5}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":4, "w":1.25}, {"label":"\u2190", "x":13.75, "y":4}, {"label":"\u2193", "x":14.75, "y":4}, {"label":"\u2192", "x":15.75, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/retro66/keymaps/default/keymap.c b/keyboards/mechlovin/zed65/retro66/keymaps/default/keymap.c new file mode 100644 index 0000000000..e20b641e12 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), +}; + +#if defined(ENCODER_MAP_ENABLE) +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [0] = {ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) } +}; +#endif diff --git a/keyboards/mechlovin/zed65/retro66/keymaps/default/readme.md b/keyboards/mechlovin/zed65/retro66/keymaps/default/readme.md new file mode 100644 index 0000000000..ac3f3127e7 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Retro66
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/retro66/keymaps/via/keymap.c b/keyboards/mechlovin/zed65/retro66/keymaps/via/keymap.c new file mode 100644 index 0000000000..2c9e49e753 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/keymaps/via/keymap.c @@ -0,0 +1,61 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + +}; + +#if defined(ENCODER_MAP_ENABLE) +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [0] = {ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) }, + [1] = {ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) }, + [2] = {ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) }, + [3] = {ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_BRID, KC_BRIU) } +}; +#endif diff --git a/keyboards/mechlovin/zed65/retro66/keymaps/via/readme.md b/keyboards/mechlovin/zed65/retro66/keymaps/via/readme.md new file mode 100644 index 0000000000..6216302953 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for retro66
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/retro66/keymaps/via/rules.mk b/keyboards/mechlovin/zed65/retro66/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/retro66/readme.md b/keyboards/mechlovin/zed65/retro66/readme.md new file mode 100644 index 0000000000..5533020662 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/readme.md @@ -0,0 +1,27 @@ +# Retro66 + + + +A Retro66 keyboard PCB, base on Zed65. + +* Keyboard Maintainer: [Mechlovin' Studio](https://github.com/mechlovin) +* Hardware Supported: Zed65, APM32F103 +* Hardware Availability: [Mechlovin' Store](https://mechlovin.studio/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/zed65/retro66:default + +Flashing example for this keyboard: + + make mechlovin/zed65/retro66:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/mechlovin/zed65/retro66/retro66.c b/keyboards/mechlovin/zed65/retro66/retro66.c new file mode 100644 index 0000000000..ffdf09db28 --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/retro66.c @@ -0,0 +1,19 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "retro66.h" + diff --git a/keyboards/mechlovin/zed65/retro66/retro66.h b/keyboards/mechlovin/zed65/retro66/retro66.h new file mode 100644 index 0000000000..2e51141b6d --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/retro66.h @@ -0,0 +1,48 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + +#define LAYOUT_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ + { K40, KC_NO, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} diff --git a/keyboards/mechlovin/zed65/retro66/rules.mk b/keyboards/mechlovin/zed65/retro66/rules.mk new file mode 100644 index 0000000000..2f4f54e74b --- /dev/null +++ b/keyboards/mechlovin/zed65/retro66/rules.mk @@ -0,0 +1,2 @@ +ENCODER_ENABLE = yes +ENCODER_MAP_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/rules.mk b/keyboards/mechlovin/zed65/rules.mk new file mode 100644 index 0000000000..a3a13b375b --- /dev/null +++ b/keyboards/mechlovin/zed65/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = STM32F103 +BOARD = STM32_F103_STM32DUINO + +# Bootloader selection +BOOTLOADER = stm32duino + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +DEFAULT_FOLDER = mechlovin/zed65/wearhaus66 diff --git a/keyboards/mechlovin/zed65/wearhaus66/config.h b/keyboards/mechlovin/zed65/wearhaus66/config.h new file mode 100644 index 0000000000..d582d36973 --- /dev/null +++ b/keyboards/mechlovin/zed65/wearhaus66/config.h @@ -0,0 +1,57 @@ +/* +Copyright 2022 Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +#define MATRIX_ROW_PINS { B13, B14, A10, A1, A0 } +#define MATRIX_COL_PINS { B11, B12, B10, B2, B1, B0, A7, A6, A5, A4, A3, A2, B3, A15, B5 } + + +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN B15 +#define RGBLED_NUM 24 +#define RGBLIGHT_LIMIT_VAL 255 + +#define WS2812_SPI SPID2 // default: SPID1 +#define WS2812_SPI_MOSI_PAL_MODE 0 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif
\ No newline at end of file diff --git a/keyboards/mechlovin/zed65/wearhaus66/halconf.h b/keyboards/mechlovin/zed65/wearhaus66/halconf.h new file mode 100644 index 0000000000..ccf7447285 --- /dev/null +++ b/keyboards/mechlovin/zed65/wearhaus66/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2022 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_SPI TRUE + +#include_next <halconf.h> + diff --git a/keyboards/mechlovin/zed65/wearhaus66/info.json b/keyboards/mechlovin/zed65/wearhaus66/info.json new file mode 100644 index 0000000000..ac672ff1f6 --- /dev/null +++ b/keyboards/mechlovin/zed65/wearhaus66/info.json @@ -0,0 +1,91 @@ +{ + "keyboard_name": "Wearhaus66", + "manufacturer": "Mechlovin Studio", + "url": "", + "maintainer": "Mechlovin' Studio", + "usb": { + "vid": "0x4D4C", + "pid": "0x6602", + "device_version": "0.0.1" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"0,0", "x":0, "y":0}, + {"label":"0,1", "x":1, "y":0}, + {"label":"0,2", "x":2, "y":0}, + {"label":"0,3", "x":3, "y":0}, + {"label":"0,4", "x":4, "y":0}, + {"label":"0,5", "x":5, "y":0}, + {"label":"0,6", "x":6, "y":0}, + {"label":"0,7", "x":7, "y":0}, + {"label":"0,8", "x":8, "y":0}, + {"label":"0,9", "x":9, "y":0}, + {"label":"0,10", "x":10, "y":0}, + {"label":"0,11", "x":11, "y":0}, + {"label":"0,12", "x":12, "y":0}, + {"label":"0,13", "x":13, "y":0}, + {"label":"1,13", "x":14, "y":0}, + {"label":"1,14", "x":15.25, "y":0.75}, + {"label":"1,0", "x":0, "y":1, "w":1.5}, + {"label":"1,1", "x":1.5, "y":1}, + {"label":"1,2", "x":2.5, "y":1}, + {"label":"1,3", "x":3.5, "y":1}, + {"label":"1,4", "x":4.5, "y":1}, + {"label":"1,5", "x":5.5, "y":1}, + {"label":"1,6", "x":6.5, "y":1}, + {"label":"1,7", "x":7.5, "y":1}, + {"label":"1,8", "x":8.5, "y":1}, + {"label":"1,9", "x":9.5, "y":1}, + {"label":"1,10", "x":10.5, "y":1}, + {"label":"1,11", "x":11.5, "y":1}, + {"label":"1,12", "x":12.5, "y":1}, + {"label":"2,12", "x":13.5, "y":1, "w":1.5}, + {"label":"2,14", "x":15.25, "y":1.75}, + {"label":"2,0", "x":0, "y":2, "w":1.75}, + {"label":"2,1", "x":1.75, "y":2}, + {"label":"2,2", "x":2.75, "y":2}, + {"label":"2,3", "x":3.75, "y":2}, + {"label":"2,4", "x":4.75, "y":2}, + {"label":"2,5", "x":5.75, "y":2}, + {"label":"2,6", "x":6.75, "y":2}, + {"label":"2,7", "x":7.75, "y":2}, + {"label":"2,8", "x":8.75, "y":2}, + {"label":"2,9", "x":9.75, "y":2}, + {"label":"2,10", "x":10.75, "y":2}, + {"label":"2,11", "x":11.75, "y":2}, + {"label":"2,13", "x":12.75, "y":2, "w":2.25}, + {"label":"3,14", "x":15.25, "y":2.75}, + {"label":"3,0", "x":0, "y":3, "w":1.25}, + {"label":"3,1", "x":1.25, "y":3}, + {"label":"3,2", "x":2.25, "y":3}, + {"label":"3,3", "x":3.25, "y":3}, + {"label":"3,4", "x":4.25, "y":3}, + {"label":"3,5", "x":5.25, "y":3}, + {"label":"3,6", "x":6.25, "y":3}, + {"label":"3,7", "x":7.25, "y":3}, + {"label":"3,8", "x":8.25, "y":3}, + {"label":"3,9", "x":9.25, "y":3}, + {"label":"3,10", "x":10.25, "y":3}, + {"label":"3,11", "x":11.25, "y":3}, + {"label":"3,12", "x":12.25, "y":3, "w":1.75}, + {"label":"3,13", "x":14, "y":3}, + {"label":"4,0", "x":0, "y":4, "w":1.25}, + {"label":"4,1", "x":1.25, "y":4, "w":1.25}, + {"label":"4,2", "x":2.5, "y":4, "w":1.25}, |