summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/infinity60/keymaps/jpetermans/keymap.c1
-rw-r--r--keyboards/infinity60/led_controller.c32
-rw-r--r--keyboards/infinity60/led_controller.h3
-rw-r--r--keyboards/infinity60/rules.mk2
4 files changed, 10 insertions, 28 deletions
diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c
index cc4633b1b4..59249ff728 100644
--- a/keyboards/infinity60/keymaps/jpetermans/keymap.c
+++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c
@@ -247,7 +247,6 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) {
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
- xprintf("init start");
led_controller_init();
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index 5c177d26b0..21f95a9c12 100644
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -135,7 +135,6 @@ msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
* initialise the IS31 chip
* ======================== */
void is31_init(void) {
- xprintf("_is31_init\n");
// just to be sure that it's all zeroes
__builtin_memset(full_page,0,0xB4+1);
// zero function page, all registers (assuming full_page is all zeroes)
@@ -200,41 +199,33 @@ static THD_FUNCTION(LEDthread, arg) {
msg_args[1] = (msg >> 16) & 0XFF;
msg_args[2] = (msg >> 24) & 0xFF;
- xprintf("msg_type: %d-%d-%d\n", msg_type, msg_args[0], msg_args[1]);
switch (msg_type){
case SET_FULL_ROW:
- xprintf("FULL ROW: %d-%d\n", msg_args[0], msg_args[1]);
//write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
//writes only to currently displayed page
write_led_byte(page_status, msg_args[1], msg_args[0]);
break;
case OFF_LED:
- xprintf("OFF: %d-%d\n", msg_args[0], msg_args[1]);
//on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
break;
case ON_LED:
- xprintf("ON: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
break;
case TOGGLE_LED:
- xprintf("TOGGLE: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
break;
case BLINK_OFF_LED:
- xprintf("B_on: %d-%d\n", msg_args[0], msg_args[1]);
//on/off/toggle single led, msg_args[0] = row/col of led
set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
break;
case BLINK_ON_LED:
- xprintf("B_off: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
break;
case BLINK_TOGGLE_LED:
- xprintf("B_togg: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
break;
@@ -244,12 +235,10 @@ static THD_FUNCTION(LEDthread, arg) {
chThdSleepMilliseconds(5);
is31_read_register(0, 0x00, &temp);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- xprintf("TOGGLE_ALL: %d-%d\n", msg_args[0], msg_args[1]);
- xprintf("temp: %d\n", temp);
led_control_reg[0] = 0;
- //if first leds are already on, toggle frame 0 off
+ //toggle led mask based on current state (temp)
if (temp==0 || page_status > 0) {
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else {
@@ -262,13 +251,14 @@ static THD_FUNCTION(LEDthread, arg) {
page_status=0;
- //maintain lock leds
+ //maintain lock leds, reset to off and force recheck to blink of all leds toggled on
+ numlock_status = 0;
+ capslock_status = 0;
led_set(host_keyboard_leds());
}
break;
case TOGGLE_BACKLIGHT:
- xprintf("TOGGLE_BKLT: %d-%d\n", msg_args[0], msg_args[1]);
//msg_args[0] = on/off
//populate 9 byte rows to be written to each pin, first byte is register (pin) address
@@ -287,12 +277,13 @@ static THD_FUNCTION(LEDthread, arg) {
case DISPLAY_PAGE:
//msg_args[0] = page to toggle on
- xprintf("DSPY_PG: %d-%d\n", msg_args[0], msg_args[1]);
if (page_status != msg_args[0]) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
page_status = msg_args[0];
- //maintain lock leds
+ //maintain lock leds, reset to off and force recheck for new page
+ numlock_status = 0;
+ capslock_status = 0;
led_set(host_keyboard_leds());
}
break;
@@ -309,7 +300,6 @@ static THD_FUNCTION(LEDthread, arg) {
break;
case TOGGLE_NUM_LOCK:
- xprintf("NMLK: %d-%d\n", msg_args[0], msg_args[1]);
//msg_args[0] = 0 or 1, off/on
if (numlock_status != msg_args[0]) {
set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
@@ -317,7 +307,6 @@ static THD_FUNCTION(LEDthread, arg) {
}
break;
case TOGGLE_CAPS_LOCK:
- xprintf("CPLK: %d-%d\n", msg_args[0], msg_args[1]);
//msg_args[0] = 0 or 1, off/on
if (capslock_status != msg_args[0]) {
set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
@@ -326,7 +315,6 @@ static THD_FUNCTION(LEDthread, arg) {
break;
case STEP_BRIGHTNESS:
- xprintf("Step: %d-%d\n", msg_args[0], msg_args[1]);
//led_args[0] = step up (1) or down (0)
switch (msg_args[0]) {
case 0:
@@ -373,7 +361,6 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
return;
}
- xprintf("_set action-led: %x-%d\n", action, led_addr);
blink_bit = action>>2;//check for blink bit
action &= ~(1<<2); //strip blink bit
@@ -381,17 +368,14 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin
//led_addr tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
- xprintf("_set control address: %x\n", control_reg_addr);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(5);
is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- xprintf("_set temp_byte_mask: %x\n", temp);
column_bit = 1<<(led_addr % 10 - 1);
column_byte = temp;
- xprintf("_set col_byte_mask: %x\n", column_byte);
switch(action) {
case 0:
@@ -451,7 +435,6 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
led_action |= (1<<2); //set blink bit
}
}
- xprintf("_lock action: %d\n", led_action);
set_led_bit(page,led_control_word,led_addr,led_action);
}
@@ -462,7 +445,6 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
void led_controller_init(void) {
uint8_t i;
- xprintf("led_init\n");
/* initialise I2C */
/* I2C pins */
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h
index 457b21a925..eb6060f260 100644
--- a/keyboards/infinity60/led_controller.h
+++ b/keyboards/infinity60/led_controller.h
@@ -75,7 +75,8 @@ void led_controller_init(void);
// D2:D0 extinguish time (3.5ms*2^i)
#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_ON 0x1
+#define IS31_REG_SHUTDOWN_OFF 0x1
+#define IS31_REG_SHUTDOWN_ON 0x0
#define IS31_REG_AGCCTRL 0x0B
#define IS31_REG_ADCRATE 0x0C
diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
index f58bb26420..c19f62401d 100644
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -56,7 +56,7 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 12:32:23 +0000