summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/centromere/matrix.c11
-rwxr-xr-xkeyboards/dichotomy/matrix.c16
-rw-r--r--keyboards/glenpickle/chimera_ergo/matrix.c11
-rw-r--r--keyboards/glenpickle/chimera_ls/matrix.c11
-rw-r--r--keyboards/glenpickle/chimera_ortho/matrix.c11
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/matrix.c11
-rwxr-xr-xkeyboards/keyhive/honeycomb/matrix.c12
-rw-r--r--keyboards/mitosis/matrix.c13
-rw-r--r--keyboards/redox_w/matrix.c2
-rw-r--r--keyboards/satt/comet46/matrix.c11
-rw-r--r--keyboards/sirius/uni660/rev1/matrix.c11
-rw-r--r--keyboards/sirius/uni660/rev2/matrix.c11
-rw-r--r--keyboards/telophase/matrix.c11
13 files changed, 111 insertions, 31 deletions
diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c
index bbd771f41b..0218adf39b 100644
--- a/keyboards/centromere/matrix.c
+++ b/keyboards/centromere/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(500000);
}
@@ -39,11 +41,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//wait for the serial data, timeout if it's been too long
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c
index dc90e7501e..0799554f0a 100755
--- a/keyboards/dichotomy/matrix.c
+++ b/keyboards/dichotomy/matrix.c
@@ -48,6 +48,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MAIN_ROWMASK 0xFFF0;
#define LOWER_ROWMASK 0x3FC0;
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
@@ -96,8 +98,6 @@ void matrix_init(void) {
uint8_t matrix_scan(void)
{
- //xprintf("\r\nTRYING TO SCAN");
-
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
@@ -113,18 +113,22 @@ uint8_t matrix_scan(void)
//harm to leave it in here
while(!uart_available()){
timeout++;
- if (timeout > 10000){
- xprintf("\r\nTime out in keyboard.");
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
uint8_t checksum = 0x00;
- for (uint8_t z=0; z<10; z++){
+ for (uint8_t z = 0; z < 10; z++){
checksum = checksum^uart_data[z];
}
checksum = checksum ^ (uart_data[10] & 0xF0);
diff --git a/keyboards/glenpickle/chimera_ergo/matrix.c b/keyboards/glenpickle/chimera_ergo/matrix.c
index 603ad0f386..32d7b09310 100644
--- a/keyboards/glenpickle/chimera_ergo/matrix.c
+++ b/keyboards/glenpickle/chimera_ergo/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/glenpickle/chimera_ls/matrix.c b/keyboards/glenpickle/chimera_ls/matrix.c
index a92c3e8431..9a69724eb7 100644
--- a/keyboards/glenpickle/chimera_ls/matrix.c
+++ b/keyboards/glenpickle/chimera_ls/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/glenpickle/chimera_ortho/matrix.c b/keyboards/glenpickle/chimera_ortho/matrix.c
index a92c3e8431..9a69724eb7 100644
--- a/keyboards/glenpickle/chimera_ortho/matrix.c
+++ b/keyboards/glenpickle/chimera_ortho/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/glenpickle/chimera_ortho_plus/matrix.c b/keyboards/glenpickle/chimera_ortho_plus/matrix.c
index 603ad0f386..32d7b09310 100644
--- a/keyboards/glenpickle/chimera_ortho_plus/matrix.c
+++ b/keyboards/glenpickle/chimera_ortho_plus/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/keyhive/honeycomb/matrix.c b/keyboards/keyhive/honeycomb/matrix.c
index 9a87ca9a2e..c8a7992ec5 100755
--- a/keyboards/keyhive/honeycomb/matrix.c
+++ b/keyboards/keyhive/honeycomb/matrix.c
@@ -46,6 +46,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define ROW_SHIFTER ((uint32_t)1)
#endif
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
//extern int8_t encoderValue;
@@ -112,12 +114,16 @@ uint8_t matrix_scan(void)
// harm to leave it in here
while(!uart_available()){
timeout++;
- if (timeout > 10000){
- xprintf("\r\nTime out in keyboard.");
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
// Check for the end packet, it's our checksum.
diff --git a/keyboards/mitosis/matrix.c b/keyboards/mitosis/matrix.c
index a92c3e8431..e5389bb113 100644
--- a/keyboards/mitosis/matrix.c
+++ b/keyboards/mitosis/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -34,18 +36,23 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
- //there are 10 bytes corresponding to 10 columns, and an end byte
+ //there are 10 bytes corresponding to 10 columns, and then an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/redox_w/matrix.c b/keyboards/redox_w/matrix.c
index 6a33e89976..9c50c9cece 100644
--- a/keyboards/redox_w/matrix.c
+++ b/keyboards/redox_w/matrix.c
@@ -34,7 +34,7 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
- //there are 14 bytes corresponding to 14 columns, and an end byte
+ //there are 10 bytes corresponding to 10 columns, and then an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
diff --git a/keyboards/satt/comet46/matrix.c b/keyboards/satt/comet46/matrix.c
index a92c3e8431..9a69724eb7 100644
--- a/keyboards/satt/comet46/matrix.c
+++ b/keyboards/satt/comet46/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/sirius/uni660/rev1/matrix.c b/keyboards/sirius/uni660/rev1/matrix.c
index 919db5c80d..f65bf0f26a 100644
--- a/keyboards/sirius/uni660/rev1/matrix.c
+++ b/keyboards/sirius/uni660/rev1/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/sirius/uni660/rev2/matrix.c b/keyboards/sirius/uni660/rev2/matrix.c
index 919db5c80d..f65bf0f26a 100644
--- a/keyboards/sirius/uni660/rev2/matrix.c
+++ b/keyboards/sirius/uni660/rev2/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c
index 44b7e4c9e9..a18a2b20ed 100644
--- a/keyboards/telophase/matrix.c
+++ b/keyboards/telophase/matrix.c
@@ -20,6 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h"
#include "uart.h"
+#define UART_MATRIX_RESPONSE_TIMEOUT 10000
+
void matrix_init_custom(void) {
uart_init(1000000);
}
@@ -41,11 +43,16 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//harm to leave it in here
while (!uart_available()) {
timeout++;
- if (timeout > 10000) {
+ if (timeout > UART_MATRIX_RESPONSE_TIMEOUT) {
break;
}
}
- uart_data[i] = uart_read();
+
+ if (timeout < UART_MATRIX_RESPONSE_TIMEOUT) {
+ uart_data[i] = uart_read();
+ } else {
+ uart_data[i] = 0x00;
+ }
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0