summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/crkbd/config.h21
-rw-r--r--keyboards/crkbd/post_config.h31
-rw-r--r--keyboards/crkbd/readme.md6
-rw-r--r--keyboards/crkbd/rev1/config.h11
-rw-r--r--keyboards/crkbd/rules.mk40
5 files changed, 72 insertions, 37 deletions
diff --git a/keyboards/crkbd/config.h b/keyboards/crkbd/config.h
index d7a3474733..f354efbb47 100644
--- a/keyboards/crkbd/config.h
+++ b/keyboards/crkbd/config.h
@@ -21,20 +21,22 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
/* USB Device descriptor parameter */
-#define VENDOR_ID 0x4653
-#define PRODUCT_ID 0x0001
-#define DEVICE_VER 0x0001
-#define MANUFACTURER foostan
-#define PRODUCT Corne
+#define VENDOR_ID 0x4653
+#define PRODUCT_ID 0x0001
+#define DEVICE_VER 0x0001
+#define MANUFACTURER foostan
+#define PRODUCT Corne
/* key matrix size */
// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+#define MATRIX_ROW_PINS \
+ { D4, C6, D7, E6 }
// wiring of each half
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+#define MATRIX_COL_PINS \
+ { F4, F5, F6, F7, B1, B3 }
// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define if matrix has ghost */
@@ -51,7 +53,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/crkbd/post_config.h b/keyboards/crkbd/post_config.h
new file mode 100644
index 0000000000..e9b0e09dd4
--- /dev/null
+++ b/keyboards/crkbd/post_config.h
@@ -0,0 +1,31 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifndef BOOTMAGIC_LITE_ROW
+# define BOOTMAGIC_LITE_ROW 0
+#endif
+#ifndef BOOTMAGIC_LITE_COLUMN
+# define BOOTMAGIC_LITE_COLUMN 1
+#endif
+
+#ifndef BOOTMAGIC_LITE_ROW_RIGHT
+# define BOOTMAGIC_LITE_ROW_RIGHT 4
+#endif
+#ifndef BOOTMAGIC_LITE_COLUMN_RIGHT
+# define BOOTMAGIC_LITE_COLUMN_RIGHT 1
+#endif
diff --git a/keyboards/crkbd/readme.md b/keyboards/crkbd/readme.md
index 1e5bfb39ab..72d44fbbd5 100644
--- a/keyboards/crkbd/readme.md
+++ b/keyboards/crkbd/readme.md
@@ -20,6 +20,12 @@ make crkbd:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+## Bootloader
+
+The Corne PCBs have a reset button next to the TRRS jack to enter in to the bootloader.
+
+Additionally, if you hold down the "Q" or "P" buttons when plugging in that half of the keyboard (per the default QWERTY layout), this will jump to the bootloader and reset the EEPROM (persistent storage). This would normally be the very top corner-most position, but due to the breakaway column, it's left at Q and P for compatibility.
+
## RGB Matrix
The Corne Keyboard also supports using the RGB Matrix feature, in place of RGB Light. This provids a better experience when using the keyboard, as it supports a number of per key effects properly. If you're not using the in switch LEDs, then you may want to pass on doing this.
diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h
index 95ffb6d5bf..337859d05c 100644
--- a/keyboards/crkbd/rev1/config.h
+++ b/keyboards/crkbd/rev1/config.h
@@ -22,17 +22,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SOFT_SERIAL_PIN D2
/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
+#define RGB_DI_PIN D3
#ifdef RGBLIGHT_ENABLE
-# define RGBLED_NUM 12 // Number of LEDs
+# define RGBLED_NUM 12 // Number of LEDs
+# define RGBLED_SPLIT \
+ { 6, 6 }
# define RGBLIGHT_SPLIT
#endif
#ifdef RGB_MATRIX_ENABLE
-# define RGBLED_NUM 54 // Number of LEDs
+# define RGBLED_NUM 54 // Number of LEDs
# define DRIVER_LED_TOTAL RGBLED_NUM
-# define RGB_MATRIX_SPLIT { 27, 27 }
+# define RGB_MATRIX_SPLIT \
+ { 27, 27 }
# define SPLIT_TRANSPORT_MIRROR
#endif
diff --git a/keyboards/crkbd/rules.mk b/keyboards/crkbd/rules.mk
index 466d9265f8..3adf9adb94 100644
--- a/keyboards/crkbd/rules.mk
+++ b/keyboards/crkbd/rules.mk
@@ -2,39 +2,33 @@
MCU = atmega32u4
# Bootloader selection
-# Teensy halfkay
-# Pro Micro caterina
-# Atmel DFU atmel-dfu
-# LUFA DFU lufa-dfu
-# QMK DFU qmk-dfu
-# ATmega32A bootloadHID
-# ATmega328P USBasp
BOOTLOADER = caterina
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
+# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
+EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
RGB_MATRIX_ENABLE = no
RGB_MATRIX_DRIVER = WS2812
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
# if firmware size over limit, try this option
# LTO_ENABLE = yes
-LAYOUTS = split_3x5_3 split_3x6_3
DEFAULT_FOLDER = crkbd/rev1
+
+RGBLIGHT_SUPPORTED = yes
+RGB_MATRIX_SUPPORTED = yes
+
+LAYOUTS = split_3x5_3 split_3x6_3