summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/work_louder/loop/config.h35
-rw-r--r--keyboards/work_louder/loop/keymaps/via/keymap.c4
-rw-r--r--keyboards/work_louder/loop/loop.c5
-rw-r--r--keyboards/work_louder/nano/config.h78
-rw-r--r--keyboards/work_louder/rgb_functions.c157
-rw-r--r--keyboards/work_louder/work_board/config.h78
-rw-r--r--keyboards/work_louder/work_board/keymaps/via/keymap.c31
-rw-r--r--keyboards/work_louder/work_board/work_board.c55
8 files changed, 331 insertions, 112 deletions
diff --git a/keyboards/work_louder/loop/config.h b/keyboards/work_louder/loop/config.h
index 011fe4f321..bd8e3d075c 100644
--- a/keyboards/work_louder/loop/config.h
+++ b/keyboards/work_louder/loop/config.h
@@ -24,7 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x1DF8
#define DEVICE_VER 0x0001
#define MANUFACTURER Work Louder
-#define PRODUCT loop
+#define PRODUCT Loop Pad
/* key matrix size */
#define MATRIX_ROWS 2
@@ -40,7 +40,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
-#define MATRIX_ROW_PINS { F5 }
+#define MATRIX_ROW_PINS \
+ { F5, NO_PIN }
#define MATRIX_COL_PINS { B3, B2, B1, D6, D7, B4, B5, B6, C6, C7, F7, F6 }
#define UNUSED_PINS
@@ -63,20 +64,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-# define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_TWINKLE
+
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT
+#define RGBLIGHT_DEFAULT_HUE 36
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
@@ -87,7 +89,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN F1
#define DRIVER_LED_TOTAL 9
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#define RGB_MATRIX_DISABLE_KEYCODES
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
diff --git a/keyboards/work_louder/loop/keymaps/via/keymap.c b/keyboards/work_louder/loop/keymaps/via/keymap.c
index 134bce65df..c5769b9910 100644
--- a/keyboards/work_louder/loop/keymaps/via/keymap.c
+++ b/keyboards/work_louder/loop/keymaps/via/keymap.c
@@ -15,11 +15,11 @@
*/
#include QMK_KEYBOARD_H
+// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Base */
[0] = LAYOUT_via(
KC_MUTE, KC_MPLY, R_M_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, MO(1),
- KC_VOLD, KC_VOLD, KC_MPRV, KC_MNXT, R_M_MOD, R_M_RMOD
+ KC_VOLU, KC_VOLD, KC_MNXT, KC_MPRV, R_M_MOD, R_M_RMOD
),
[1] = LAYOUT_via(
RESET, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, MO(2), _______,
diff --git a/keyboards/work_louder/loop/loop.c b/keyboards/work_louder/loop/loop.c
index 3551995317..5c0d108d19 100644
--- a/keyboards/work_louder/loop/loop.c
+++ b/keyboards/work_louder/loop/loop.c
@@ -43,14 +43,15 @@ bool encoder_update_kb(uint8_t index, bool clockwise) {
#endif
#ifdef RGB_MATRIX_ENABLE
+// clang-format off
led_config_t g_led_config = {
{
{ NO_LED, NO_LED, NO_LED, 8, 7, 6, 5, 4, 3, 2, 1, 0 }
}, {
- { 36, 32 }, { 55, 32 }, { 74, 32 }, { 93, 32 }, { 112, 32 }, { 131, 32 }, { 150, 32 }, { 169, 32 }, { 188, 32 }
+ {188, 32}, {169, 32}, {150, 32}, {131, 32}, {112, 32}, {93, 32}, {74, 32}, {55, 32}, {36, 32}
}, {
4, 4, 4, 4, 4, 4, 4, 4, 4
}
};
-
+// clang-format on
#endif
diff --git a/keyboards/work_louder/nano/config.h b/keyboards/work_louder/nano/config.h
index 4c897b7e51..1a47e725bb 100644
--- a/keyboards/work_louder/nano/config.h
+++ b/keyboards/work_louder/nano/config.h
@@ -24,15 +24,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0xE6EF
#define DEVICE_VER 0x0001
#define MANUFACTURER Work Louder
-#define PRODUCT nano
+#define PRODUCT Nano Pad
/* key matrix size */
-#define MATRIX_ROWS 1
-#ifdef VIA_ENABLE
-# define MATRIX_COLS 5
-#else
-# define MATRIX_COLS 3
-#endif
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 5
/*
* Keyboard Matrix Assignments
@@ -44,13 +40,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
-#define MATRIX_ROW_PINS { F7 }
-#define MATRIX_COL_PINS { B5, B6, C6 }
-#define UNUSED_PINS
+#define MATRIX_ROW_PINS \
+ { F7 }
+#define MATRIX_COL_PINS \
+ { B5, B6, C6, NO_PIN, NO_PIN }
/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
+#define DIODE_DIRECTION COL2ROW
//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
@@ -62,25 +58,26 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
-#define RGBLIGHT_DI_PIN C7
-# define RGBLED_NUM 6
+#define RGBLIGHT_DI_PIN C7
+#define RGBLED_NUM 6
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-# define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT
+#define RGBLIGHT_DEFAULT_HUE 170
+
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
@@ -89,9 +86,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
-#define RGB_DI_PIN F6
-#define DRIVER_LED_TOTAL 2
+#define RGB_DI_PIN F6
+#define DRIVER_LED_TOTAL 2
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#define RGB_MATRIX_DISABLE_KEYCODES
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
@@ -151,14 +150,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 3
-
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 2
-#define ENCODERS_PAD_A { D7 }
-#define ENCODERS_PAD_B { B4 }
+#define ENCODERS_PAD_A \
+ { D7 }
+#define ENCODERS_PAD_B \
+ { B4 }
#define ENCODERS 1
-#define ENCODERS_CW_KEY { { 3, 0 } }
-#define ENCODERS_CCW_KEY { { 4, 0 } }
+#define ENCODERS_CW_KEY \
+ { \
+ { 3, 0 } \
+ }
+#define ENCODERS_CCW_KEY \
+ { \
+ { 4, 0 } \
+ }
diff --git a/keyboards/work_louder/rgb_functions.c b/keyboards/work_louder/rgb_functions.c
index 5a2043f9b4..c9106b3976 100644
--- a/keyboards/work_louder/rgb_functions.c
+++ b/keyboards/work_louder/rgb_functions.c
@@ -17,13 +17,160 @@
#include QMK_KEYBOARD_H
#include "rgb_functions.h"
-#if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_EANBLE)
-# undef RGB_DI_PIN
-# define RGBLIGHT_DI_PIN
-# include "ws2812.c"
+#ifdef RGBLIGHT_ENABLE
+# include "ws2812.h"
+# include <avr/interrupt.h>
+# include <avr/io.h>
+# include <util/delay.h>
+
+# define pinmask(pin) (_BV((pin)&0xF))
+
+/*
+ * Forward declare internal functions
+ *
+ * The functions take a byte-array and send to the data output as WS2812 bitstream.
+ * The length is the number of bytes to send - three per LED.
+ */
+
+static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi);
+
+/*
+ This routine writes an array of bytes with RGB values to the Dataout pin
+ using the fast 800kHz clockless WS2811/2812 protocol.
+*/
+
+// Timing in ns
+# define w_zeropulse 350
+# define w_onepulse 900
+# define w_totalperiod 1250
+
+// Fixed cycles used by the inner loop
+# define w_fixedlow 2
+# define w_fixedhigh 4
+# define w_fixedtotal 8
+
+// Insert NOPs to match the timing, if possible
+# define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000)
+# define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000)
+# define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000)
+
+// w1_nops - nops between rising edge and falling edge - low
+# if w_zerocycles >= w_fixedlow
+# define w1_nops (w_zerocycles - w_fixedlow)
+# else
+# define w1_nops 0
+# endif
+
+// w2_nops - nops between fe low and fe high
+# if w_onecycles >= (w_fixedhigh + w1_nops)
+# define w2_nops (w_onecycles - w_fixedhigh - w1_nops)
+# else
+# define w2_nops 0
+# endif
+
+// w3_nops - nops to complete loop
+# if w_totalcycles >= (w_fixedtotal + w1_nops + w2_nops)
+# define w3_nops (w_totalcycles - w_fixedtotal - w1_nops - w2_nops)
+# else
+# define w3_nops 0
+# endif
+
+// The only critical timing parameter is the minimum pulse length of the "0"
+// Warn or throw error if this timing can not be met with current F_CPU settings.
+# define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000)
+# if w_lowtime > 550
+# error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
+# elif w_lowtime > 450
+# warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
+# warning "Please consider a higher clockspeed, if possible"
+# endif
+
+# define w_nop1 "nop \n\t"
+# define w_nop2 "rjmp .+0 \n\t"
+# define w_nop4 w_nop2 w_nop2
+# define w_nop8 w_nop4 w_nop4
+# define w_nop16 w_nop8 w_nop8
+
+static inline void ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t masklo, uint8_t maskhi) {
+ uint8_t curbyte, ctr, sreg_prev;
+
+ sreg_prev = SREG;
+ cli();
+
+ while (datlen--) {
+ curbyte = (*data++);
+
+ asm volatile(" ldi %0,8 \n\t"
+ "loop%=: \n\t"
+ " out %2,%3 \n\t" // '1' [01] '0' [01] - re
+# if (w1_nops & 1)
+ w_nop1
+# endif
+# if (w1_nops & 2)
+ w_nop2
+# endif
+# if (w1_nops & 4)
+ w_nop4
+# endif
+# if (w1_nops & 8)
+ w_nop8
+# endif
+# if (w1_nops & 16)
+ w_nop16
+# endif
+ " sbrs %1,7 \n\t" // '1' [03] '0' [02]
+ " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low
+ " lsl %1 \n\t" // '1' [04] '0' [04]
+# if (w2_nops & 1)
+ w_nop1
+# endif
+# if (w2_nops & 2)
+ w_nop2
+# endif
+# if (w2_nops & 4)
+ w_nop4
+# endif
+# if (w2_nops & 8)
+ w_nop8
+# endif
+# if (w2_nops & 16)
+ w_nop16
+# endif
+ " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high
+# if (w3_nops & 1)
+ w_nop1
+# endif
+# if (w3_nops & 2)
+ w_nop2
+# endif
+# if (w3_nops & 4)
+ w_nop4
+# endif
+# if (w3_nops & 8)
+ w_nop8
+# endif
+# if (w3_nops & 16)
+ w_nop16
+# endif
+
+ " dec %0 \n\t" // '1' [+2] '0' [+2]
+ " brne loop%=\n\t" // '1' [+3] '0' [+4]
+ : "=&d"(ctr)
+ : "r"(curbyte), "I"(_SFR_IO_ADDR(PORTx_ADDRESS(RGBLIGHT_DI_PIN))), "r"(maskhi), "r"(masklo));
+ }
+
+ SREG = sreg_prev;
+}
void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) {
- ws2812_setleds(start_led, num_leds);
+ DDRx_ADDRESS(RGBLIGHT_DI_PIN) |= pinmask(RGBLIGHT_DI_PIN);
+
+ uint8_t masklo = ~(pinmask(RGBLIGHT_DI_PIN)) & PORTx_ADDRESS(RGBLIGHT_DI_PIN);
+ uint8_t maskhi = pinmask(RGBLIGHT_DI_PIN) | PORTx_ADDRESS(RGBLIGHT_DI_PIN);
+
+ ws2812_sendarray_mask((uint8_t *)start_led, num_leds * sizeof(LED_TYPE), masklo, maskhi);
+
+ _delay_us(WS2812_TRST_US);
}
#endif
diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h
index 2ccc1be4c4..fb9723db0b 100644
--- a/keyboards/work_louder/work_board/config.h
+++ b/keyboards/work_louder/work_board/config.h
@@ -27,8 +27,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT Work Board
/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
/*
* Keyboard Matrix Assignments
@@ -40,42 +40,35 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F5 }
-#define MATRIX_COL_PINS { D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, E6 }
+#define MATRIX_ROW_PINS \
+ { F0, F1, F4, F5 }
+#define MATRIX_COL_PINS \
+ { D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, E6 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
+#define DIODE_DIRECTION COL2ROW
-#define LED_NUM_LOCK_PIN B2
-#define LED_CAPS_LOCK_PIN B3
-#define LED_SCROLL_LOCK_PIN B7
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-#define RGBLIGHT_DI_PIN D2
-# define RGBLED_NUM 26
+#define RGBLIGHT_DI_PIN D2
+#define RGBLED_NUM 26
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_LIMIT_VAL 100 /* The maximum brightness level */
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-# define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_TWINKLE
+
+#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_GRADIENT + 9
+#define RGBLIGHT_DEFAULT_HUE 213
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
@@ -84,10 +77,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
-#define RGB_DI_PIN D0
-#define DRIVER_LED_TOTAL 50
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 100
+#define RGB_DI_PIN D1
+#define DRIVER_LED_TOTAL 49
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#define RGB_MATRIX_DISABLE_KEYCODES
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
@@ -146,14 +140,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-#define ENCODERS_PAD_A { B0 }
-#define ENCODERS_PAD_B { B1 }
+#define ENCODERS_PAD_A \
+ { B0 }
+#define ENCODERS_PAD_B \
+ { B1 }
#define ENCODERS 1
-#define ENCODERS_CW_KEY { { 12, 1 } }
-#define ENCODERS_CCW_KEY { { 12, 2 } }
+#define ENCODERS_CW_KEY \
+ { \
+ { 12, 1 } \
+ }
+#define ENCODERS_CCW_KEY \
+ { \
+ { 12, 2 } \
+ }
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0
+
+#define VIA_EEPROM_LAYOUT_OPTIONS_DEFAULT 0x1
diff --git a/keyboards/work_louder/work_board/keymaps/via/keymap.c b/keyboards/work_louder/work_board/keymaps/via/keymap.c
index 6bdc75ac22..1cf5e07577 100644
--- a/keyboards/work_louder/work_board/keymaps/via/keymap.c
+++ b/keyboards/work_louder/work_board/keymaps/via/keymap.c
@@ -27,14 +27,15 @@ enum tap_dances {
ENC_TAP,
};
-#define LOWER KC_FN13
-#define RAISE KC_FN23
+#define LOWER FN_MO13
+#define RAISE FN_MO23
+// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_via(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, USER09,
- KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_VOLD,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , KC_VOLU,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_VOLU,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , KC_VOLD,
KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
@@ -59,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
-
+// clang-format on
void dance_enc_finished(qk_tap_dance_state_t *state, void *user_data) {
if (state->count == 1) {
@@ -93,3 +94,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
return true;
}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ writePinLow(B2);
+ writePinLow(B3);
+ writePinLow(B7);
+
+ switch (get_highest_layer(state)) {
+ case 1:
+ writePinHigh(B2);
+ break;
+ case 2:
+ writePinHigh(B3);
+ break;
+ case 3:
+ writePinHigh(B7);
+ break;
+ }
+
+ return state;
+}
diff --git a/keyboards/work_louder/work_board/work_board.c b/keyboards/work_louder/work_board/work_board.c
index e17f7417cc..a2722a055a 100644
--- a/keyboards/work_louder/work_board/work_board.c
+++ b/keyboards/work_louder/work_board/work_board.c
@@ -18,7 +18,9 @@
#if !defined(VIA_ENABLE) && defined(ENCODER_ENABLE)
bool encoder_update_kb(uint8_t index, bool clockwise) {
- if (!encoder_update_user(index, clockwise)) { return false; }
+ if (!encoder_update_user(index, clockwise)) {
+ return false;
+ }
if (clockwise) {
tap_code(KC_VOLD);
} else {
@@ -71,23 +73,56 @@ __attribute__((weak)) void oled_task_user(void) {
}
#endif
-
#ifdef RGB_MATRIX_ENABLE
+// clang-format off
led_config_t g_led_config = { {
- { 49, 48, 47, 46, 45, 43, 42, 41, 40, 39, 38, 37},
- { 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36 },
- { 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13 },
- { 0, 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12 },
+ { 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48 },
+ { 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25 },
+ { 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 },
+ { 12, 11, 10, 9, 8, 7, 5, 4, 3, 2, 1, 0}
}, {
- { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 122, 63 }, { 101, 63 }, { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 },
+ { 223, 63 }, { 203, 63 }, { 183, 63 }, { 162, 63 }, { 142, 63 }, { 122, 63 }, { 112, 63 }, { 101, 63 }, { 81, 63 }, { 61, 63 }, { 40, 63 }, { 20, 63 }, { 0, 63 },
{ 0, 42 }, { 20, 42 }, { 40, 42 }, { 61, 42 }, { 81, 42 }, { 101, 42 }, { 122, 42 }, { 142, 42 }, { 162, 42 }, { 183, 42 }, { 203, 42 }, { 223, 42 },
{ 223, 21 }, { 203, 21 }, { 183, 21 }, { 162, 21 }, { 142, 21 }, { 122, 21 }, { 101, 21 }, { 81, 21 }, { 61, 21 }, { 40, 21 }, { 20, 21 }, { 0, 21 },
- { 0, 0 }, { 20, 0 }, { 40, 0 }, { 61, 0 }, { 81, 0 }, { 101, 0 }, { 122, 0 }, { 132, 0 }, { 142, 0 }, { 162, 0 }, { 183, 0 }, { 203, 0 }, { 223, 0 },
+ { 0, 0 }, { 20, 0 }, { 40, 0 }, { 61, 0 }, { 81, 0 }, { 101, 0 }, { 122, 0 }, { 142, 0 }, { 162, 0 }, { 183, 0 }, { 203, 0 }, { 223, 0 }
}, {
+ 1, 1, 1, 1, 1, 4,4,4, 1, 1, 1, 1, 1,
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
- 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
- 1, 1, 1, 1, 1, 4,4,4, 1, 1, 1, 1, 1
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1
} };
+// clang-format on
+
+__attribute__((weak)) void rgb_matrix_indicators_user(void) {
+# ifdef VIA_ENABLE
+ static bool layout_2u = false;
+ static uint16_t timer = 0;
+ if (timer_elapsed(timer) > 500) {
+ timer = timer_read();
+ layout_2u = (bool)via_get_layout_options();
+ }
+ if (layout_2u) {
+ rgb_matrix_set_color(5, 0, 0, 0);
+ rgb_matrix_set_color(7, 0, 0, 0);
+ } else {
+ rgb_matrix_set_color(6, 0, 0, 0);
+ }
+# else
+ rgb_matrix_set_color(5, 0, 0, 0);
+ rgb_matrix_set_color(7, 0, 0, 0);
+# endif
+}
+
+void keyboard_pre_init_kb(void) {
+ setPinOutput(B2);
+ setPinOutput(B3);
+ setPinOutput(B7);
+
+ writePinLow(B2);
+ writePinLow(B3);
+ writePinLow(B7);
+
+ keyboard_pre_init_user();
+}
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 10:14:40 +0000