diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/satt/comet46/i2c.c | 162 | ||||
| -rw-r--r-- | keyboards/satt/comet46/i2c.h | 46 | ||||
| -rw-r--r-- | keyboards/satt/comet46/keymaps/default/config.h | 29 | ||||
| -rw-r--r-- | keyboards/satt/comet46/keymaps/default/keymap.c | 45 | ||||
| -rw-r--r-- | keyboards/satt/comet46/keymaps/default/rules.mk | 5 | ||||
| -rw-r--r-- | keyboards/satt/comet46/keymaps/satt/config.h | 29 | ||||
| -rw-r--r-- | keyboards/satt/comet46/keymaps/satt/keymap.c | 105 | ||||
| -rw-r--r-- | keyboards/satt/comet46/keymaps/satt/rules.mk | 4 | ||||
| -rw-r--r-- | keyboards/satt/comet46/lib/glcdfont.c | 137 | ||||
| -rw-r--r-- | keyboards/satt/comet46/rules.mk | 5 | ||||
| -rw-r--r-- | keyboards/satt/comet46/ssd1306.c | 343 | ||||
| -rw-r--r-- | keyboards/satt/comet46/ssd1306.h | 90 |
12 files changed, 54 insertions, 946 deletions
diff --git a/keyboards/satt/comet46/i2c.c b/keyboards/satt/comet46/i2c.c deleted file mode 100644 index 4bee5c6398..0000000000 --- a/keyboards/satt/comet46/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/satt/comet46/i2c.h b/keyboards/satt/comet46/i2c.h deleted file mode 100644 index 710662c7ab..0000000000 --- a/keyboards/satt/comet46/i2c.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/satt/comet46/keymaps/default/config.h b/keyboards/satt/comet46/keymaps/default/config.h deleted file mode 100644 index ee02a94b7e..0000000000 --- a/keyboards/satt/comet46/keymaps/default/config.h +++ /dev/null @@ -1,29 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// place overrides here - - -/* Use I2C or Serial */ - -#define USE_I2C -#define SSD1306OLED diff --git a/keyboards/satt/comet46/keymaps/default/keymap.c b/keyboards/satt/comet46/keymaps/default/keymap.c index bccca0a091..3e6f9045ff 100644 --- a/keyboards/satt/comet46/keymaps/default/keymap.c +++ b/keyboards/satt/comet46/keymaps/default/keymap.c @@ -2,9 +2,6 @@ // This is the canonical layout file for the Quantum project. If you want to add another keyboard, #include QMK_KEYBOARD_H -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -148,8 +145,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +#ifdef OLED_ENABLE // You need to add source files to SRC in rules.mk when using OLED display functions void set_keylog(uint16_t keycode); @@ -157,25 +153,10 @@ const char *read_keylog(void); const char *read_modifier_state(void); const char *read_host_led_state(void); -void matrix_init_user(void) { - iota_gfx_init(false); // turns on the display -} - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void render_status(struct CharacterMatrix *matrix) { +bool oled_task_user(void) { // Layer state char layer_str[22]; - matrix_write(matrix, "Layer: "); + oled_write_P(PSTR("Layer: "), false); uint8_t layer = get_highest_layer(layer_state); uint8_t default_layer = get_highest_layer(eeconfig_read_default_layer()); switch (layer) { @@ -207,27 +188,21 @@ void render_status(struct CharacterMatrix *matrix) { default: snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); } - matrix_write_ln(matrix, layer_str); + oled_write_ln(layer_str, false); // Last entered keycode - matrix_write_ln(matrix, read_keylog()); + oled_write_ln(read_keylog(), false); // Modifier state - matrix_write_ln(matrix, read_modifier_state()); + oled_write_ln(read_modifier_state(), false); // Host Keyboard LED Status - matrix_write(matrix, read_host_led_state()); -} + oled_write(read_host_led_state(), false); - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - render_status(&matrix); - matrix_update(&display, &matrix); + return false; } -#endif//SSD1306OLED +#endif bool process_record_user(uint16_t keycode, keyrecord_t *record) { - #ifdef SSD1306OLED + #ifdef OLED_ENABLE if (record->event.pressed) { set_keylog(keycode); } diff --git a/keyboards/satt/comet46/keymaps/default/rules.mk b/keyboards/satt/comet46/keymaps/default/rules.mk index 3fa01f96af..3ceffe90ec 100644 --- a/keyboards/satt/comet46/keymaps/default/rules.mk +++ b/keyboards/satt/comet46/keymaps/default/rules.mk @@ -1,5 +1,6 @@ # If you want to change display settings of the OLED, you need to change the following lines -SRC += ./lib/glcdfont.c \ - ./lib/keylogger.c \ +SRC += ./lib/keylogger.c \ ./lib/modifier_state_reader.c \ ./lib/host_led_state_reader.c + +OLED_ENABLE = yes diff --git a/keyboards/satt/comet46/keymaps/satt/config.h b/keyboards/satt/comet46/keymaps/satt/config.h deleted file mode 100644 index a3ca2ebfef..0000000000 --- a/keyboards/satt/comet46/keymaps/satt/config.h +++ /dev/null @@ -1,29 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -/* Use I2C or Serial */ - -#define USE_I2C -#define SSD1306OLED - -#endif diff --git a/keyboards/satt/comet46/keymaps/satt/keymap.c b/keyboards/satt/comet46/keymaps/satt/keymap.c index 54d1d791d7..505b7eaf0a 100644 --- a/keyboards/satt/comet46/keymaps/satt/keymap.c +++ b/keyboards/satt/comet46/keymaps/satt/keymap.c @@ -5,9 +5,6 @@ #include "keymap_jis2us.h" #include "action_pseudo_lut.h" #include "keymap_japanese.h" -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -176,8 +173,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { } } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +#ifdef OLED_ENABLE // You need to add source files to SRC in rules.mk when using OLED display functions void set_keylog(uint16_t keycode); @@ -185,86 +181,59 @@ const char *read_keylog(void); const char *read_modifier_state(void); const char *read_host_led_state(void); -void matrix_init_user(void) { - iota_gfx_init(false); // turns on the display -} - -void matrix_scan_user(void) { - iota_gfx_task(); // this is what updates the display continuously -} - -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void render_status(struct CharacterMatrix *matrix) { +bool oled_task_user(void) { // Layer state char layer_str[22]; - matrix_write(matrix, "Layer: "); + oled_write_P(PSTR("Layer: "), false); uint8_t layer = get_highest_layer(layer_state); - uint8_t default_layer = biton32(eeconfig_read_default_layer()); - switch (layer) { - case _QWERTY: - switch (default_layer) { - case _QWERTY: - snprintf(layer_str, sizeof(layer_str), "Qwerty"); - break; - case _PSEUDO_US: - snprintf(layer_str, sizeof(layer_str), "Psuedo_US"); - break; - default: - snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer); - break; - } - break; - case _RAISE: - snprintf(layer_str, sizeof(layer_str), "Raise"); - break; - case _LOWER: - snprintf(layer_str, sizeof(layer_str), "Lower"); - break; + uint8_t default_layer = get_highest_layer(eeconfig_read_default_layer()); + switch (layer) { + case _QWERTY: + switch (default_layer) { + case _QWERTY: + snprintf(layer_str, sizeof(layer_str), "Qwerty"); + break; + case _PSEUDO_US: + snprintf(layer_str, sizeof(layer_str), "Psuedo_US"); + break; + default: + snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer); + break; + } + break; + case _RAISE: + snprintf(layer_str, sizeof(layer_str), "Raise"); + break; + case _LOWER: + snprintf(layer_str, sizeof(layer_str), "Lower"); + break; case _PSEUDO_US_RAISE: snprintf(layer_str, sizeof(layer_str), "P_US_Raise"); break; case _PSEUDO_US_LOWER: snprintf(layer_str, sizeof(layer_str), "P_US_Lower"); break; - case _ADJUST: - snprintf(layer_str, sizeof(layer_str), "Adjust"); - break; - default: - snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); - } - matrix_write_ln(matrix, layer_str); + case _ADJUST: + snprintf(layer_str, sizeof(layer_str), "Adjust"); + break; + default: + snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); + } + oled_write_ln(layer_str, false); // Last entered keycode - matrix_write_ln(matrix, read_keylog()); + oled_write_ln(read_keylog(), false); // Modifier state - matrix_write_ln(matrix, read_modifier_state()); + oled_write_ln(read_modifier_state(), false); // Host Keyboard LED Status - matrix_write(matrix, read_host_led_state()); -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif + oled_write(read_host_led_state(), false); - matrix_clear(&matrix); - render_status(&matrix); - matrix_update(&display, &matrix); + return false; } -#endif//SSD1306OLED +#endif bool process_record_user(uint16_t keycode, keyrecord_t *record) { - #ifdef SSD1306OLED + #ifdef OLED_ENABLE if (record->event.pressed) { set_keylog(keycode); } diff --git a/keyboards/satt/comet46/keymaps/satt/rules.mk b/keyboards/satt/comet46/keymaps/satt/rules.mk index 91609dd4fd..9c07b12fcb 100644 --- a/keyboards/satt/comet46/keymaps/satt/rules.mk +++ b/keyboards/satt/comet46/keymaps/satt/rules.mk @@ -1,8 +1,8 @@ SRC += action_pseudo_lut.c # If you want to change display settings of the OLED, you need to change the following lines -SRC += ./lib/glcdfont.c \ - ./lib/keylogger.c \ +SRC += ./lib/keylogger.c \ ./lib/modifier_state_reader.c \ ./lib/host_led_state_reader.c +OLED_ENABLE = yes diff --git a/keyboards/satt/comet46/lib/glcdfont.c b/keyboards/satt/comet46/lib/glcdfont.c deleted file mode 100644 index 361d0c3dc6..0000000000 --- a/keyboards/satt/comet46/lib/glcdfont.c +++ /dev/null @@ -1,137 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#include "progmem.h" - -// Standard ASCII 5x7 font - -const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, - 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, - 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, - 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, - 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, - 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, - 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, - 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, - 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, - 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, - 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, - 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, - 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, - 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, - 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, - 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, - 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, - 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, - 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, - 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, - 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, - 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, - 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, - 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, - 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, - 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, - 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, - 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, - 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, - 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, - 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, - 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, - 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, - 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, - 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, - 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, - 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, - 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, - 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, - 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, - 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, - 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, - 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, - 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, - 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, - 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, - 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, - 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, - 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, - 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, - 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, - 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, - 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, - 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, - 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, - 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, - 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, - 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, - 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, - 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, - 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, - 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, - 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, - 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, - 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, - 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, - 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, - 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, - 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, - 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, - 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, - 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, - 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, - 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, - 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, - 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, - 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, - 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, - 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, - 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, - 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, - 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, - 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, - 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, - 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, - 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, - 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, - 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, - 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, - 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, - 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, - 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, - 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, - 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, - 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, - 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, - 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, - 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, - 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, - 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, - 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, - 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, - 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, - 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, - 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, - 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, - 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, - 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, - 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, - 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, - 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, - 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, - 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, - 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, - 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, - 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, - 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, - 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, - 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00 -}; diff --git a/keyboards/satt/comet46/rules.mk b/keyboards/satt/comet46/rules.mk index e177fc6441..83f7d905e9 100644 --- a/keyboards/satt/comet46/rules.mk +++ b/keyboards/satt/comet46/rules.mk @@ -17,9 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite +OLED_DRIVER = SSD1306 # project specific files -SRC += matrix.c \ - i2c.c \ - ssd1306.c +SRC += matrix.c QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/satt/comet46/ssd1306.c b/keyboards/satt/comet46/ssd1306.c deleted file mode 100644 index 4bd2d80bc4..0000000000 --- a/keyboards/satt/comet46/ssd1306.c +++ /dev/null @@ -1,343 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -struct CharacterMatrix display; - -extern const unsigned char font[] PROGMEM; - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ - -// 'last_flush' is declared as uint16_t, -// so this must be less than 65535 -#define ScreenOffInterval 60000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -static bool force_dirty = true; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - - send_cmd2(SetComPins, 0x2); - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { - char data_ln[strlen(data)+2]; - snprintf(data_ln, sizeof(data_ln), "%s\n", data); - matrix_write(matrix, data_ln); -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty|| force_dirty) { - iota_gfx_flush(); - force_dirty = false; - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { - force_dirty = true; - return true; |