diff options
Diffstat (limited to 'keyboards')
37 files changed, 332 insertions, 403 deletions
diff --git a/keyboards/clueboard1/Makefile b/keyboards/clueboard/Makefile index a2599d2143..d6f4bfcae6 100644 --- a/keyboards/clueboard1/Makefile +++ b/keyboards/clueboard/Makefile @@ -1,4 +1,5 @@ +SUBPROJECT_DEFAULT = rev2 # MCU name MCU = atmega32u4 diff --git a/keyboards/clueboard1/clueboard1.c b/keyboards/clueboard/clueboard.c index 5785f447f0..13195bda6b 100644 --- a/keyboards/clueboard1/clueboard1.c +++ b/keyboards/clueboard/clueboard.c @@ -1,4 +1,9 @@ -#include "clueboard1.h" +#include "clueboard.h" + +void led_init_ports() { + // * Set our LED pins as output + DDRB |= (1<<4); +} void led_set_kb(uint8_t usb_led) { DDRF |= (1<<0); diff --git a/keyboards/clueboard/clueboard.h b/keyboards/clueboard/clueboard.h new file mode 100644 index 0000000000..4f2a3c1df1 --- /dev/null +++ b/keyboards/clueboard/clueboard.h @@ -0,0 +1,13 @@ +#ifndef CLUEBOARD_H +#define CLUEBOARD_H + +#ifdef SUBPROJECT_rev1 + #include "rev1.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2.h" +#endif + +#include "quantum.h" + +#endif diff --git a/keyboards/clueboard1/config.h b/keyboards/clueboard/config.h index 16338ddb03..ceac80795b 100644 --- a/keyboards/clueboard1/config.h +++ b/keyboards/clueboard/config.h @@ -22,29 +22,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* USB Device descriptor parameter */ #define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2301 -#define DEVICE_VER 0x0003 #define MANUFACTURER Clueboard #define PRODUCT Clueboard #define DESCRIPTION QMK keyboard firmware for Clueboard -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -// ROWS: Top to bottom, COLS: Left to right -/* Column pin configuration -* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1 -*/ -#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } -/* Row pin configuration -* row: 0 1 2 3 4 -* pin: D1 D0 D2 D5 D3 -*/ -#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 } -#define UNUSED_PINS - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW @@ -64,16 +45,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* Underlight configuration - */ - #define ws2812_PORTREG PORTB - #define ws2812_DDRREG DDRB - #define ws2812_pin 2 - #define RGBLED_NUM 14 // Number of LEDs - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -92,4 +63,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev1 + #include "rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2/config.h" +#endif + #endif diff --git a/keyboards/clueboard2/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c index 1795e68cda..89f71e83a7 100644 --- a/keyboards/clueboard2/keymaps/default/keymap.c +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -#include "clueboard2.h" +#include "clueboard.h" // Used for SHIFT_ESC #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) @@ -138,6 +138,7 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { if (record->event.pressed) { rgblight_toggle(); } + break; case RGBLED_INCREASE_HUE: if (record->event.pressed) { diff --git a/keyboards/clueboard/keymaps/max/Makefile b/keyboards/clueboard/keymaps/max/Makefile new file mode 100644 index 0000000000..950dadf841 --- /dev/null +++ b/keyboards/clueboard/keymaps/max/Makefile @@ -0,0 +1,49 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/clueboard2/keymaps/max/keymap.c b/keyboards/clueboard/keymaps/max/keymap.c index 65a101c2b5..82c93401db 100644 --- a/keyboards/clueboard2/keymaps/max/keymap.c +++ b/keyboards/clueboard/keymaps/max/keymap.c @@ -1,4 +1,4 @@ -#include "clueboard2.h" +#include "clueboard.h" // Used for SHIFT_ESC #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) diff --git a/keyboards/clueboard2/keymaps/skully/keymap.c b/keyboards/clueboard/keymaps/skully/keymap.c index 74a03f2f30..df6f054e07 100644 --- a/keyboards/clueboard2/keymaps/skully/keymap.c +++ b/keyboards/clueboard/keymaps/skully/keymap.c @@ -1,4 +1,4 @@ -#include "clueboard2.h" +#include "clueboard.h" // Used for SHIFT_ESC #define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile new file mode 100644 index 0000000000..80a942d06f --- /dev/null +++ b/keyboards/clueboard/rev1/Makefile @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h new file mode 100644 index 0000000000..9bb58f56e8 --- /dev/null +++ b/keyboards/clueboard/rev1/config.h @@ -0,0 +1,37 @@ +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "../config.h" + +#define PRODUCT_ID 0x2301 +#define DEVICE_VER 0x0003 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +// ROWS: Top to bottom, COLS: Left to right +/* Column pin configuration +* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 +* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1 +*/ +#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } +/* Row pin configuration +* row: 0 1 2 3 4 +* pin: D1 D0 D2 D5 D3 +*/ +#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 } +#define UNUSED_PINS + +/* Underlight configuration + */ +#define ws2812_PORTREG PORTB +#define ws2812_DDRREG DDRB +#define ws2812_pin 2 +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + +#endif
\ No newline at end of file diff --git a/keyboards/clueboard/rev1/rev1.c b/keyboards/clueboard/rev1/rev1.c new file mode 100644 index 0000000000..520a869e57 --- /dev/null +++ b/keyboards/clueboard/rev1/rev1.c @@ -0,0 +1 @@ +#include "rev1.h" diff --git a/keyboards/clueboard1/clueboard1.h b/keyboards/clueboard/rev1/rev1.h index 3c6c333420..abdfd079b3 100644 --- a/keyboards/clueboard1/clueboard1.h +++ b/keyboards/clueboard/rev1/rev1.h @@ -1,8 +1,7 @@ -#ifndef CLUEBOARD1_H -#define CLUEBOARD1_H - -#include "quantum.h" +#ifndef REV1_H +#define REV1_H +#include "../clueboard.h" /* Clueboard matrix layout * ,-----------------------------------------------------------. ,---. @@ -30,6 +29,7 @@ */ // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array + #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile new file mode 100644 index 0000000000..cea967b795 --- /dev/null +++ b/keyboards/clueboard/rev2/Makefile @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../Makefile +endif diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h new file mode 100644 index 0000000000..e2f8336beb --- /dev/null +++ b/keyboards/clueboard/rev2/config.h @@ -0,0 +1,40 @@ +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "../config.h" + +#define PRODUCT_ID 0x2320 +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +// ROWS: Top to bottom, COLS: Left to right +/* Row pin configuration +* row: 0 1 2 3 4 5 6 7 8 9 +* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 +*/ +#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 + * pin: F0 F1 F4 F5 F6 F7 E6 B1 + */ +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } +#define UNUSED_PINS + + /* Backlight configuration + */ +#define BACKLIGHT_LEVELS 1 + +/* Underlight configuration + */ +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD +#define ws2812_pin 7 +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif
\ No newline at end of file diff --git a/keyboards/clueboard/rev2/rev2.c b/keyboards/clueboard/rev2/rev2.c new file mode 100644 index 0000000000..7a8ec368e6 --- /dev/null +++ b/keyboards/clueboard/rev2/rev2.c @@ -0,0 +1,47 @@ +#include "rev2.h" +#include <avr/io.h> +#include "backlight.h" +#include "print.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); + + // JTAG disable for PORT F. write JTD bit twice within four cycles. + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); +} + + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +void backlight_init_ports(void) { + print("init_backlight_pin()\n"); + // Set our LED pins as output + DDRD |= (1<<6); // Esc + DDRB |= (1<<7); // Page Up + DDRD |= (1<<4); // Arrows + + // Set our LED pins low + PORTD &= ~(1<<6); // Esc + PORTB &= ~(1<<7); // Page Up + PORTD &= ~(1<<4); // Arrows +} + +void backlight_set(uint8_t level) { + if ( level == 0 ) { + // Turn off light + PORTD |= (1<<6); // Esc + PORTB |= (1<<7); // Page Up + PORTD |= (1<<4); // Arrows + } else { + // Turn on light + PORTD &= ~(1<<6); // Esc + PORTB &= ~(1<<7); // Page Up + PORTD &= ~(1<<4); // Arrows + } +} diff --git a/keyboards/clueboard2/clueboard2.h b/keyboards/clueboard/rev2/rev2.h index e474b31019..912de405da 100644 --- a/keyboards/clueboard2/clueboard2.h +++ b/keyboards/clueboard/rev2/rev2.h @@ -1,8 +1,7 @@ -#ifndef CLUEBOARD2_H -#define CLUEBOARD2_H - -#include "quantum.h" +#ifndef REV2_H +#define REV2_H +#include "../clueboard.h" /* Clueboard matrix layout * ,-----------------------------------------------------------. ,---. @@ -30,6 +29,7 @@ */ // The first section contains all of the arguments // The second converts the arguments into a two-dimensional array + #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ diff --git a/keyboards/clueboard1/keymaps/default/keymap.c b/keyboards/clueboard1/keymaps/default/keymap.c deleted file mode 100644 index 3f4f3c4149..0000000000 --- a/keyboards/clueboard1/keymaps/default/keymap.c +++ /dev/null @@ -1,184 +0,0 @@ -#include "clueboard1.h" - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _RS 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| - * `----------------------------------------------------------------------------------' - */ -[_BL] = KEYMAP( - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' - */ -[_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), - - /* Keymap _RS: Reset layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' - */ -[_RS] = KEYMAP( - #ifdef RGBLIGHT_ENABLE - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(1), F(7), \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(8), \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), F(5), \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, F(2), F(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, F(4), F(6), F(3)), - #else - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS), - #endif -}; - -enum function_id { - SHIFT_ESC, - #ifdef RGBLIGHT_ENABLE - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL - #endif -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), - #ifdef RGBLIGHT_ENABLE - [1] = ACTION_FUNCTION(RGBLED_TOGGLE), - [2] = ACTION_FUNCTION(RGBLED_STEP_MODE), - [3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - #endif -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; - switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - //led operations - #ifdef RGBLIGHT_ENABLE - case RGBLED_TOGGLE: - if (record->event.pressed) { - rgblight_toggle(); - } - - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; - #endif - } -} diff --git a/keyboards/clueboard2/config.h b/keyboards/clueboard2/config.h deleted file mode 100644 index 2887519afd..0000000000 --- a/keyboards/clueboard2/config.h +++ /dev/null @@ -1,99 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2320 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard with RGB Underlighting -#define DESCRIPTION QMK keyboard firmware for Clueboard - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -// ROWS: Top to bottom, COLS: Left to right -/* Row pin configuration -* row: 0 1 2 3 4 5 6 7 8 9 -* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 -*/ -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -/* Column pin configuration - * col: 0 1 2 3 4 5 6 7 - * pin: F0 F1 F4 F5 F6 F7 E6 B1 - */ -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 1 - -/* Underlight configuration - */ - #define ws2812_PORTREG PORTD - #define ws2812_DDRREG DDRD - #define ws2812_pin 7 - #define RGBLED_NUM 14 // Number of LEDs - #define RGBLIGHT_HUE_STEP 10 - #define RGBLIGHT_SAT_STEP 17 - #define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/clueboard2/keymaps/max/Makefile b/keyboards/clueboard2/keymaps/max/Makefile deleted file mode 100644 index 22b5b94e37..0000000000 --- a/keyboards/clueboard2/keymaps/max/Makefile +++ /dev/null @@ -1,11 +0,0 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/cluepad/Makefile b/keyboards/cluepad/Makefile index eb7a58025e..a331ff4dcd 100644 --- a/keyboards/cluepad/Makefile +++ b/keyboards/cluepad/Makefile @@ -1,8 +1,4 @@ - -# # project specific files -SRC = backlight.c - # MCU name #MCU = at90usb1287 MCU = atmega32u4 diff --git a/keyboards/cluepad/backlight.c b/keyboards/cluepad/backlight.c deleted file mode 100644 index a9caed1df8..0000000000 --- a/keyboards/cluepad/backlight.c +++ /dev/null @@ -1,54 +0,0 @@ -#include <avr/io.h> -#include "backlight.h" -#include "led.h" - |