diff options
Diffstat (limited to 'keyboards')
26 files changed, 1478 insertions, 0 deletions
diff --git a/keyboards/idobao/id87/v2/config.h b/keyboards/idobao/id87/v2/config.h new file mode 100644 index 0000000000..8a2c58aa2d --- /dev/null +++ b/keyboards/idobao/id87/v2/config.h @@ -0,0 +1,163 @@ +// Copyright 2022 peepeetee (@peepeetee) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6964 // "id" +#define PRODUCT_ID 0x0087 +#define DEVICE_VER 0x0002 +#define MANUFACTURER IDOBAO +#define PRODUCT ID87 + +/* key matrix size */ +#define MATRIX_ROWS 11 +#define MATRIX_COLS 9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { E6, B0, B1, B2, B3, B7, F7, F6, F5, F4, F1 } + +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 } +//#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +#define LED_CAPS_LOCK_PIN C7 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN E2 +# define DRIVER_LED_TOTAL 103 /* 16 Bottom 87 top*/ +#ifdef RGB_DI_PIN +# define RGBLED_NUM 103 /* 16 Bottom 87 top*/ +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#endif +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_KEYPRESSES +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/idobao/id87/v2/info.json b/keyboards/idobao/id87/v2/info.json new file mode 100644 index 0000000000..e4e252aa64 --- /dev/null +++ b/keyboards/idobao/id87/v2/info.json @@ -0,0 +1,98 @@ +{ + "keyboard_name": "ID87", + "url": "https://www.idobao.net/products/idobao-id87-80-hot-swappable-mechanical-keyboard-kit", + "maintainer": "qmk", + "layouts": { + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"-", "x":11, "y":1.5}, + {"label":"=", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"[", "x":11.5, "y":2.5}, + {"label":"]", "x":12.5, "y":2.5}, + {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":";", "x":10.75, "y":3.5}, + {"label":"'", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":",", "x":9.25, "y":4.5}, + {"label":".", "x":10.25, "y":4.5}, + {"label":"/", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + {"label":"Up", "x":16.25, "y":4.5}, + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"LT(1, KC_APP)", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + {"label":"Left", "x":15.25, "y":5.5}, + {"label":"Down", "x":16.25, "y":5.5}, + {"label":"Right", "x":17.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/idobao/id87/v2/keymaps/default/keymap.c b/keyboards/idobao/id87/v2/keymaps/default/keymap.c new file mode 100644 index 0000000000..2b07bdb0ec --- /dev/null +++ b/keyboards/idobao/id87/v2/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* +Copyright 2020 Tybera +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_APP), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_tkl_ansi( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, _______, + _______, BL_TOGG, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, BL_INC, + _______, _______, _______, _______, _______, _______, _______, _______, BL_INC, BL_DEC, RGB_MOD + ), + +}; diff --git a/keyboards/idobao/id87/v2/keymaps/default/readme.md b/keyboards/idobao/id87/v2/keymaps/default/readme.md new file mode 100644 index 0000000000..6054431de4 --- /dev/null +++ b/keyboards/idobao/id87/v2/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for id87
\ No newline at end of file diff --git a/keyboards/idobao/id87/v2/keymaps/via/keymap.c b/keyboards/idobao/id87/v2/keymaps/via/keymap.c new file mode 100644 index 0000000000..534784555c --- /dev/null +++ b/keyboards/idobao/id87/v2/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* +Copyright 2020 Tybera +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_APP), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_tkl_ansi( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, _______, + _______, BL_TOGG, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, BL_INC, + _______, _______, _______, _______, _______, _______, _______, _______, BL_INC, BL_DEC, RGB_MOD + ), + [2] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/idobao/id87/v2/keymaps/via/rules.mk b/keyboards/idobao/id87/v2/keymaps/via/rules.mk new file mode 100644 index 0000000000..ca9fed0e6b --- /dev/null +++ b/keyboards/idobao/id87/v2/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +LTO_ENABLE = yes +VIA_ENABLE = yes diff --git a/keyboards/idobao/id87/v2/readme.md b/keyboards/idobao/id87/v2/readme.md new file mode 100644 index 0000000000..06a3f2c08a --- /dev/null +++ b/keyboards/idobao/id87/v2/readme.md @@ -0,0 +1,27 @@ +# ID87 v2 + + + +A TKL keyboard with hotswap sockets and in switch RGB. + +* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) +* Hardware Supported: ID87 v2 +* Hardware Availability: [Drop](https://drop.com/buy/idobao-id87-v2-tkl-mechanical-keyboard-kit), [idobao](https://idobao.net/products/idobao-id87-v2-tkl-pcb-mounted-hot-swappable-mechanical-keyboard-kit) + +Make example for this keyboard (after setting up your build environment): + + make idobao/id87/v2:default + +Flashing example for this keyboard: + + make idobao/id87/v2:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/idobao/id87/v2/rules.mk b/keyboards/idobao/id87/v2/rules.mk new file mode 100644 index 0000000000..1d519258e3 --- /dev/null +++ b/keyboards/idobao/id87/v2/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 + +LAYOUTS = tkl_ansi diff --git a/keyboards/idobao/id87/v2/v2.c b/keyboards/idobao/id87/v2/v2.c new file mode 100644 index 0000000000..5bca630ca3 --- /dev/null +++ b/keyboards/idobao/id87/v2/v2.c @@ -0,0 +1,45 @@ +// Copyright 2022 peepeetee (@peepeetee) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "v2.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + { 102, NO_LED, 101, 100, 99, 98, 97, 96, 95 }, //0 + { 70, 71, 72, 73, 74, 75, 76, 77, 78 }, //1 + { 69, 68, 67, 66, 65, 64, 63, 62, 61 }, //2 + { 40, 41, 42, 43, 44, 45, 46, 47, 48 }, //3 + { 39, NO_LED, 38, 37, 36, 35, 34, 33, 32 }, //4 + { 16, 17, 18, 23, 22, NO_LED, 19, 21, 20 }, //5 + { NO_LED, 87, 88, 90, 91, 92, 89, 93, 94 }, //6 + { 80, 86, 85, 83, NO_LED, 82, 84, 81, 79 }, //7 + { NO_LED, 53, 54, 56, 57, 58, 55, 59, 60 }, //8 + { NO_LED, NO_LED, 27, 52, NO_LED, 51, NO_LED, 50, 49 }, //9 + { NO_LED, 26, 25, NO_LED, 28, 29, 24, 30, 31 } //A +}, { + // LED Index to Physical Position + { 13, 51 },{ 40, 51},{ 73, 51},{ 108, 51},{ 141, 51},{ 174, 51},{ 207, 51}, + { 207, 32}, + { 207, 13},{ 174, 13},{ 141, 13},{ 108, 13},{ 73, 13},{ 40, 13},{ 13, 13}, + { 13, 32}, + +{ 8, 59 }, { 23, 59 }, { 38, 59 }, { 83, 59 }, { 129, 59 }, { 144, 59 }, { 159, 59 }, { 174, 59 }, { 193, 59 }, { 205, 59 }, { 217, 59 }, +{ 205, 49 }, { 165, 49 }, { 142, 49 }, { 130, 49 }, { 118, 49 }, { 106, 49 }, { 94, 49 }, { 82, 49 }, { 70, 49 }, { 58, 49 }, { 46, 49 }, { 34, 49 }, { 14, 49 }, +{ 11, 39 }, { 28, 39 }, { 40, 39 }, { 52, 39 }, { 64, 39 }, { 76, 39 }, { 88, 39 }, { 100, 39 }, { 112, 39 }, { 124, 39 }, { 136, 39 }, { 148, 39 }, { 168, 39 }, +{ 217, 30 }, { 205, 30 }, { 193, 30 }, { 172, 30 }, { 157, 30 }, { 145, 30 }, { 133, 30 }, { 121, 30 }, { 109, 30 }, { 97, 30 }, { 85, 30 }, { 73, 30 }, { 61, 30 }, { 49, 30 }, { 37, 30 }, { 25, 30 }, { 10, 30 }, +{ 7, 20 }, { 19, 20 }, { 31, 20 }, { 43, 20 }, { 55, 20 }, { 67, 20 }, { 79, 20 }, { 91, 20 }, { 103, 20 }, { 115, 20 }, { 127, 20 }, { 139, 20 }, { 151, 20 }, { 169, 20 }, { 193, 20 }, { 205, 20 }, { 217, 20 }, +{ 217, 5 }, { 205, 5 }, { 193, 5 }, { 175, 5 }, { 163, 5 }, { 151, 5 }, { 139, 5 }, { 121, 5 }, { 109, 5 }, { 97, 5 }, { 85, 5 }, { 67, 5 }, { 55, 5 }, { 43, 5 }, { 31, 5 },{ 7, 5 }, +}, { + // LED Index to Flag +2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + +1,1,1,4,1,1,1,1,1,1,1, +1,1,4,4,4,4,4,4,4,4,4,4,1, +9,4,4,4,4,4,4,4,4,4,4,4,1, +1,1,1,4,4,4,4,4,4,4,4,4,4,4,4,4,1, +4,4,4,4,4,4,4,4,4,4,4,4,4,1,1,1,1, +1,9,1,4,4,4,4,1,1,1,1,4,4,4,4,1 +} }; + +#endif diff --git a/keyboards/idobao/id87/v2/v2.h b/keyboards/idobao/id87/v2/v2.h new file mode 100644 index 0000000000..1a75d95755 --- /dev/null +++ b/keyboards/idobao/id87/v2/v2.h @@ -0,0 +1,40 @@ +/* +Copyright 2020 Tybera +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_tkl_ansi( \ + K00, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K73, K76, K72, K71, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K83, K86, K82, K81, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K93, \ + K40, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, K92, \ + K50, K51, K52, K56, K58, K57, K54, K53, KA6, KA2, KA1 \ +) { \ + { K00, KC_NO, K02, K03, K04, K05, K06, K07, K08 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, KC_NO, K56, K57, K58 }, \ + { KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \ + { K70, K71, K72, K73, KC_NO, K75, K76, K77, K78 }, \ + { KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \ + { KC_NO, KC_NO, K92, K93, KC_NO, K95, KC_NO, K97, K98 }, \ + { KC_NO, KA1, KA2, KC_NO, KA4, KA5, KA6, KA7, KA8 }, \ +} + + diff --git a/keyboards/winry/winry315/config.h b/keyboards/winry/winry315/config.h new file mode 100644 index 0000000000..1a9617c1e3 --- /dev/null +++ b/keyboards/winry/winry315/config.h @@ -0,0 +1,138 @@ +// Copyright 2022 Sergey Vlasov (@sigprof) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +// Key matrix size. +#define MATRIX_ROWS 1 +#define MATRIX_COLS 24 + +// Key pins (including encoder press switches). +// The NO_PIN entries are reserved for encoder rotation mappings. +#define DIRECT_PINS \ + { \ + { F4, C7, D4, D5, D1, F5, C6, D6, D3, D2, F6, B6, D7, B4, B5, B2, D0, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \ + } + +// clang-format off + +// Encoder pins. +// Encoder numbering (assuming the default board orientation with encoders on +// the top side): +// 0 - left +// 1 - center (with a longer shaft and a larger knob) +// 2 - right +#define ENCODERS_PAD_A { F1, B0, B3 } +#define ENCODERS_PAD_B { F0, B1, B7 } +#define ENCODER_RESOLUTION 4 + +// Encoder mappings (used for VIA). +#define ENCODERS 3 +#define ENCODERS_CW_KEY { { 22, 0 }, { 18, 0 }, { 20, 0 } } +#define ENCODERS_CCW_KEY { { 23, 0 }, { 19, 0 }, { 21, 0 } } + +// clang-format on + +// RGB LED parameters. +// This PCB uses a single chain of WS2812-compatible addressable RGB LEDs for +// per-key backlight and underglow. +#define RGB_DI_PIN F7 +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 150 + +// RGB Lighting configuration. This mode is used by the vendor firmware, and +// can be chosen if the full RGB Matrix support is not desired for some reason. +#ifdef RGBLIGHT_ENABLE +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_SLEEP +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +#endif + +// RGB Matrix configuration. +#ifdef RGB_MATRIX_ENABLE +# define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL + +# define RGB_MATRIX_CENTER \ + { 35, 35 } + +# define RGB_DISABLE_WHEN_USB_SUSPENDED + +// This option is required for the TYPING_HEATMAP and DIGITAL_RAIN effects, +// both of which are disabled below, so the common support for those effects is +// disabled too. +# undef RGB_MATRIX_FRAMEBUFFER_EFFECTS + +// This option is required for reactive effects; disabling this option will +// implicitly disable all of them. +# define RGB_MATRIX_KEYPRESSES + +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +// The PIXEL_FRACTAL effect does not work properly when the matrix layout is +// different from the physical layout; it also has problems when underglow +// LEDs are present, or when multiple LEDs are associated with the same key. +# undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL + +// Framebuffer effects; can be enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS +// is defined. Both of these effects currently don't work properly when the +// key matrix does not match the physical layout, so they are disabled. +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN + +// Reactive effects; can be enabled only if at least one of +// RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined. +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#endif + +// Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed. +#define DEBOUNCE 5 diff --git a/keyboards/winry/winry315/info.json b/keyboards/winry/winry315/info.json new file mode 100644 index 0000000000..6410c6222f --- /dev/null +++ b/keyboards/winry/winry315/info.json @@ -0,0 +1,104 @@ +{ + "manufacturer": "Winry", + "keyboard_name": "Winry315", + "maintainer": "sigprof", + "url": "", + "usb": { + "device_version": "0.0.1", + "pid": "0x0315", + "vid": "0xF1F1" + }, + "layout_aliases": { + "LAYOUT_all": "LAYOUT_top" |