diff options
Diffstat (limited to 'keyboards/ymdk/id75/readme.md')
| -rw-r--r-- | keyboards/ymdk/id75/readme.md | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/keyboards/ymdk/id75/readme.md b/keyboards/ymdk/id75/readme.md new file mode 100644 index 0000000000..9315745f71 --- /dev/null +++ b/keyboards/ymdk/id75/readme.md @@ -0,0 +1,30 @@ +# Idobao x YMDK ID75 + + + +A 75-key, 5-row ortholinear keyboard with per-key and underglow RGB LEDs. + +* Keyboard Maintainer: [The QMK Community](https://github.com/qmk) +* Hardware Supported: [Idobao x YMDK ID75 PCB (APM32F103CBT6)](https://www.aliexpress.com/item/3256804537842097.html) + * This PCB uses an ARM Cortex-M3 MCU with 128kb flash. **It is not the same as `idobao/id75` or `ymdk/ymd75`.** +* Hardware Availability: [YMDK](https://ymdkey.com/products/id75-75-keys-ortholinear-layout-qmk-anodized-aluminum-case-plate-hot-swappable-hot-swap-type-c-pcb-mechanical-keyboard-kit), [AliExpress (YMDK Store)](https://www.aliexpress.com/item/2255800125183974.html), [Amazon](https://www.amazon.com/Ortholinear-Anodized-Aluminum-hot-swappable-Mechanical/dp/B07ZQ8CD88) + +Make example for this keyboard (after setting up your build environment): + + make ymdk/id75:default + +Flashing example for this keyboard: + + make ymdk/id75:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving. +* **Physical reset button**: Press the button on the back of the PCB twice in quick succession. +* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, in the bottom-right corner. + +After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `MT.KEY`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded. |