summaryrefslogtreecommitdiffstats
path: root/keyboards/ymd96/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ymd96/README.md')
-rw-r--r--keyboards/ymd96/README.md25
1 files changed, 9 insertions, 16 deletions
diff --git a/keyboards/ymd96/README.md b/keyboards/ymd96/README.md
index a60323ab95..5de5062ecd 100644
--- a/keyboards/ymd96/README.md
+++ b/keyboards/ymd96/README.md
@@ -10,7 +10,7 @@ using Bootmapper Client to change any keyboard settings, since not all the
USB report options are supported.
Here is the default layout, it is fairly simple with a few function keys:
-![YMD96 Layout](https://i.imgur.com/qCwE2ns.png)
+![YMD96 Layout](https://i.imgur.com/3QnqVPn.png)
If you have a different layout (since there were many options during the GB), please feel free to contribute!
Keyboard maintainer: [Andrew](https://github.com/sparkyman215)
@@ -29,27 +29,18 @@ This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/t
## Installing and Building
-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-```
-
-In order to use the `./program` script, which can reboot the board into
-the bootloader, you'll need Python 2 with PyUSB installed:
-
-```
-$ pip install pyusb
-```
+Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme!
+On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux, you can simply use the terminal.
+Once you have those two pieces of software:
Build the keyboard with
```
-$ make ymd96:default
+$ make ymd96-default
```
If you make your own layout, change the `default` word to whatever your layout is.
+And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding control, and click `find device`. Then you can specify the .hex file and flash it to the device.
+
## Troubleshooting
From my experience, it's really hard to brick these boards. But these
@@ -60,3 +51,5 @@ tricks have been useful when it got stuck in a weird scenario.
done, just reflash the board with the original firmware.
2. Sometimes USB hubs can act weird, so try connecting the board directly
to your computer or plugging/unplugging the USB hub.
+
+Lastly, if you still need help, you can add me on Discord and I'll be happy to help.