diff options
Diffstat (limited to 'keyboards/yandrstudio/nz64/config.h')
| -rw-r--r-- | keyboards/yandrstudio/nz64/config.h | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/keyboards/yandrstudio/nz64/config.h b/keyboards/yandrstudio/nz64/config.h new file mode 100644 index 0000000000..5ef9ef1ece --- /dev/null +++ b/keyboards/yandrstudio/nz64/config.h @@ -0,0 +1,122 @@ +/* Copyright 2021 JasonRen(biu) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xAA96 +#define PRODUCT_ID 0xAAAF +#define DEVICE_VER 0x0001 +#define MANUFACTURER Y&R +#define PRODUCT nz64 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 +#define MATRIX_COL_PINS { A15, B3, B4, B6, B7, B5, C13, A5, A4, B14, B15, A8, A9, A10 } +#define MATRIX_ROW_PINS { C14, B13, B12, C15, A3 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Fix VIA RGB_light */ +#define VIA_HAS_BROKEN_KEYCODES + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + + +/* RGN Matrix */ +#ifdef RGB_MATRIX_ENABLE +# define RGB_DI_PIN A7 +# define RGBLED_NUM 82 +# define DRIVER_LED_TOTAL RGBLED_NUM + +# define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 +# define WS2812_PWM_CHANNEL 2 // default: 2 +# define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. + + +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 +# define RGBLIGHT_VAL_STEP 18 +# define RGB_DISABLE_WHEN_USB_SUSPENDED true +# define RGB_MATRIX_CENTER { 96, 32 } +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS + +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +/* enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined */ +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +/* enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined */ +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#endif + + +#ifdef RGBLIGHT_ENABLE +# define RGB_DI_PIN A7 +# define RGBLED_NUM 82 +# define DRIVER_LED_TOTAL RGBLED_NUM + +# define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 +# define WS2812_PWM_CHANNEL 2 // default: 2 +# define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#endif |