diff options
Diffstat (limited to 'keyboards/wilba_tech')
86 files changed, 215 insertions, 673 deletions
diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h index 6f8d6f9b8b..d34fd6468c 100644 --- a/keyboards/wilba_tech/rama_works_kara/config.h +++ b/keyboards/wilba_tech/rama_works_kara/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// M60-A PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json index 18bba59fe5..3dd9ad22c2 100644 --- a/keyboards/wilba_tech/rama_works_kara/info.json +++ b/keyboards/wilba_tech/rama_works_kara/info.json @@ -8,6 +8,11 @@ "pid": "0x4B52", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "community_layouts": ["60_hhkb"], diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h index c0b005d443..c3bb43ec6d 100644 --- a/keyboards/wilba_tech/rama_works_koyu/config.h +++ b/keyboards/wilba_tech/rama_works_koyu/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// KOYU PCB pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 -// COL2ROW or ROW2COL -#define DIODE_DIRECTION COL2ROW - // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE // Locking resynchronize hack diff --git a/keyboards/wilba_tech/rama_works_koyu/info.json b/keyboards/wilba_tech/rama_works_koyu/info.json index 190638c001..55a180af63 100644 --- a/keyboards/wilba_tech/rama_works_koyu/info.json +++ b/keyboards/wilba_tech/rama_works_koyu/info.json @@ -8,6 +8,11 @@ "pid": "0x4B59", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["F0", "F1", "F4", "F6", "F7"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h index be92b36639..00ecf5f186 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/config.h +++ b/keyboards/wilba_tech/rama_works_m10_b/config.h @@ -17,23 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m10_b/info.json b/keyboards/wilba_tech/rama_works_m10_b/info.json index 4b7c87be21..0133776586 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/info.json +++ b/keyboards/wilba_tech/rama_works_m10_b/info.json @@ -8,6 +8,11 @@ "pid": "0x00AB", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "backlight": { "pin": "C6" }, diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h index 9f68eb4287..1cc9655b1b 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/config.h +++ b/keyboards/wilba_tech/rama_works_m10_c/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { E6 } -#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m10_c/info.json b/keyboards/wilba_tech/rama_works_m10_c/info.json index b60dd53815..6b6bd3d61b 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/info.json +++ b/keyboards/wilba_tech/rama_works_m10_c/info.json @@ -8,6 +8,11 @@ "pid": "0x00AC", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"], + "rows": ["E6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h index 79a1614268..ab04ab070b 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/config.h +++ b/keyboards/wilba_tech/rama_works_m50_a/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F5, F6 } -#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m50_a/info.json b/keyboards/wilba_tech/rama_works_m50_a/info.json index a53a960f0a..e26b56dd2f 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/info.json +++ b/keyboards/wilba_tech/rama_works_m50_a/info.json @@ -8,6 +8,11 @@ "pid": "0x050A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"], + "rows": ["F0", "F1", "F5", "F6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h index add6c1c779..9b6b3c7955 100644 --- a/keyboards/wilba_tech/rama_works_m50_ax/config.h +++ b/keyboards/wilba_tech/rama_works_m50_ax/config.h @@ -15,23 +15,6 @@ */ #pragma once - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F0, F1, F5, F6 } -#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/wilba_tech/rama_works_m50_ax/info.json b/keyboards/wilba_tech/rama_works_m50_ax/info.json index 2fc265fec9..fc296c2754 100644 --- a/keyboards/wilba_tech/rama_works_m50_ax/info.json +++ b/keyboards/wilba_tech/rama_works_m50_ax/info.json @@ -8,6 +8,11 @@ "pid": "0x150A", "device_version": "0.0.1" }, + "matrix_pins": { + "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"], + "rows": ["F0", "F1", "F5", "F6"] + }, + "diode_direction": "COL2ROW", "processor": "atmega32u4", "bootloader": "atmel-dfu", "layouts": { diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h index acc21edc28..c80a018496 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/config.h +++ b/keyboards/wilba_tech/rama_works_m60_a/config.h @@ -15,18 +15,10 @@ */ #pragma once - -// M60-A PCB default pin-out -#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } -#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } - // IS31FL3731 driver #define DRIVER_COUNT 2 #define RGB_MATRIX_LED_COUNT 72 |