Move matrix config to info.json, part 5 (#20003)

Co-authored-by: Nick Brassel <nick@tzarc.org>

86 files changed, 215 insertions, 673 deletions

diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h
index 6f8d6f9b8b..d34fd6468c 100644
--- a/keyboards/wilba_tech/rama_works_kara/config.h
+++ b/keyboards/wilba_tech/rama_works_kara/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json
index 18bba59fe5..3dd9ad22c2 100644
--- a/keyboards/wilba_tech/rama_works_kara/info.json
+++ b/keyboards/wilba_tech/rama_works_kara/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4B52",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_hhkb"],
diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h
index c0b005d443..c3bb43ec6d 100644
--- a/keyboards/wilba_tech/rama_works_koyu/config.h
+++ b/keyboards/wilba_tech/rama_works_koyu/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// KOYU PCB pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_koyu/info.json b/keyboards/wilba_tech/rama_works_koyu/info.json
index 190638c001..55a180af63 100644
--- a/keyboards/wilba_tech/rama_works_koyu/info.json
+++ b/keyboards/wilba_tech/rama_works_koyu/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4B59",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h
index be92b36639..00ecf5f186 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_b/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_b/info.json b/keyboards/wilba_tech/rama_works_m10_b/info.json
index 4b7c87be21..0133776586 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_b/info.json
@@ -8,6 +8,11 @@
     "pid": "0x00AB",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "C6"
   },
diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h
index 9f68eb4287..1cc9655b1b 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_c/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_c/info.json b/keyboards/wilba_tech/rama_works_m10_c/info.json
index b60dd53815..6b6bd3d61b 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_c/info.json
@@ -8,6 +8,11 @@
     "pid": "0x00AC",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h
index 79a1614268..ab04ab070b 100644
--- a/keyboards/wilba_tech/rama_works_m50_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m50_a/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, F6 }
-#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m50_a/info.json b/keyboards/wilba_tech/rama_works_m50_a/info.json
index a53a960f0a..e26b56dd2f 100644
--- a/keyboards/wilba_tech/rama_works_m50_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m50_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x050A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
+        "rows": ["F0", "F1", "F5", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h
index add6c1c779..9b6b3c7955 100644
--- a/keyboards/wilba_tech/rama_works_m50_ax/config.h
+++ b/keyboards/wilba_tech/rama_works_m50_ax/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, F6 }
-#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m50_ax/info.json b/keyboards/wilba_tech/rama_works_m50_ax/info.json
index 2fc265fec9..fc296c2754 100644
--- a/keyboards/wilba_tech/rama_works_m50_ax/info.json
+++ b/keyboards/wilba_tech/rama_works_m50_ax/info.json
@@ -8,6 +8,11 @@
         "pid": "0x150A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
+        "rows": ["F0", "F1", "F5", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h
index acc21edc28..c80a018496 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m60_a/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_m60_a/info.json b/keyboards/wilba_tech/rama_works_m60_a/info.json
index d76b178947..8ba17a5df2 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m60_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x060A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_hhkb"],
diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h
index 5b745b109d..6d3f0fb97f 100644
--- a/keyboards/wilba_tech/rama_works_m65_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m65_b/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE