1 files changed, 0 insertions, 146 deletions
diff --git a/keyboards/wekey/stelo65/config.h b/keyboards/wekey/stelo65/config.h
deleted file mode 100644
index 6bcd065ac4..0000000000
--- a/keyboards/wekey/stelo65/config.h
+++ /dev/null
@@ -1,146 +0,0 @@
-// Copyright 2021 @wekey (@@wekey)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID    0x5559
-#define PRODUCT_ID   0x0003
-#define DEVICE_VER   0x0001
-#define MANUFACTURER @wekey
-#define PRODUCT      Stelo65
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, E6, D0, D1, C6, F7, F6, F5, F4, F1 }
-#define MATRIX_COL_PINS { C7, B6, B5, B4, D7, D6, D4, D5 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-#ifdef ENCODER_ENABLE
-#define ENCODERS_PAD_A { D3 }
-#define ENCODERS_PAD_B { D2 } 
-#define ENCODER_RESOLUTION 2
-
-#define ENCODERS 1
-#define ENCODERS_CW_KEY  { { 4, 7 } }
-#define ENCODERS_CCW_KEY { { 4, 6 } }
-#endif
-
-#define LED_CAPS_LOCK_PIN B3
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-//#    define RGBLIGHT_ANIMATIONS
-/*== or choose animations ==*/
-//#    define RGBLIGHT_EFFECT_BREATHING
-//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//#    define RGBLIGHT_EFFECT_SNAKE
-//#    define RGBLIGHT_EFFECT_KNIGHT
-//#    define RGBLIGHT_EFFECT_CHRISTMAS
-//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//#    define RGBLIGHT_EFFECT_RGB_TEST
-//#    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0