diff options
Diffstat (limited to 'keyboards/tkc')
46 files changed, 216 insertions, 698 deletions
diff --git a/keyboards/tkc/california/config.h b/keyboards/tkc/california/config.h index 3f8d4b58e7..01959c10ad 100644 --- a/keyboards/tkc/california/config.h +++ b/keyboards/tkc/california/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 10 #define DYNAMIC_KEYMAP_LAYER_COUNT 2 //Reduced layer count due to memory space considerations @@ -41,57 +36,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -#define BACKLIGHT_PIN B7 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 -#endif -#define LED_NUM_LOCK_PIN F1 -#define LED_CAPS_LOCK_PIN F0 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -107,7 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tkc/california/info.json b/keyboards/tkc/california/info.json index b673e5d30d..d7c95747c9 100644 --- a/keyboards/tkc/california/info.json +++ b/keyboards/tkc/california/info.json @@ -8,6 +8,16 @@ "pid": "0x0009", "device_version": "0.0.1" }, + "backlight": { + "pin": "B7", + "breathing": true + }, + "indicators": { + "caps_lock": "F0", + "num_lock": "F1" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.5, "y":0}, {"label":"Home", "x":17, "y":0}, {"label":"End", "x":18, "y":0}, {"label":"Scroll Lock", "x":19, "y":0}, {"label":"Pause", "x":20, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Bksp", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"PgUp", "x":15.5, "y":1.5}, {"label":"Num Lock", "x":17, "y":1.5}, {"label":"/", "x":18, "y":1.5}, {"label":"*", "x":19, "y":1.5}, {"label":"-", "x":20, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"PgDn", "x":15.5, "y":2.5}, {"label":"7", "x":17, "y":2.5}, {"label":"8", "x":18, "y":2.5}, {"label":"9", "x":19, "y":2.5}, {"label":"+", "x":20, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":17, "y":3.5}, {"label":"5", "x":18, "y":3.5}, {"label":"6", "x":19, "y":3.5}, {"x":20, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":15.5, "y":4.75}, {"label":"1", "x":17, "y":4.5}, {"label":"2", "x":18, "y":4.5}, {"label":"3", "x":19, "y":4.5}, {"label":"Enter", "x":20, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Menu", "x":11.25, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":12.5, "y":5.5, "w":1.25}, {"label":"\u2190", "x":14.5, "y":5.75}, {"label":"\u2193", "x":15.5, "y":5.75}, {"label":"\u2192", "x":16.5, "y":5.75}, {"label":"0", "x":18, "y":5.5}, {"label":".", "x":19, "y":5.5}, {"x":20, "y":5.5}] diff --git a/keyboards/tkc/california/rules.mk b/keyboards/tkc/california/rules.mk index 1c4073c9ce..b325f3f0c7 100644 --- a/keyboards/tkc/california/rules.mk +++ b/keyboards/tkc/california/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/lefty/config.h b/keyboards/tkc/candybar/lefty/config.h index 8762bdf515..ebd4742ee3 100644 --- a/keyboards/tkc/candybar/lefty/config.h +++ b/keyboards/tkc/candybar/lefty/config.h @@ -16,45 +16,11 @@ #pragma once -#include "config_common.h" -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 17 #define DIODE_DIRECTION COL2ROW #define MATRIX_ROW_PINS { A8, A9, A10, A13 } #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/lefty/info.json b/keyboards/tkc/candybar/lefty/info.json index c902c78cee..53ed1e97dc 100644 --- a/keyboards/tkc/candybar/lefty/info.json +++ b/keyboards/tkc/candybar/lefty/info.json @@ -8,6 +8,8 @@ "pid": "0x0003", "device_version": "0.0.6" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/lefty/rules.mk b/keyboards/tkc/candybar/lefty/rules.mk index 52cb35c5a2..36101d2f8e 100644 --- a/keyboards/tkc/candybar/lefty/rules.mk +++ b/keyboards/tkc/candybar/lefty/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/lefty_r3/config.h b/keyboards/tkc/candybar/lefty_r3/config.h index ccf635a7ce..a9b8550193 100644 --- a/keyboards/tkc/candybar/lefty_r3/config.h +++ b/keyboards/tkc/candybar/lefty_r3/config.h @@ -16,45 +16,11 @@ #pragma once -#include "config_common.h" -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 17 #define DIODE_DIRECTION COL2ROW #define MATRIX_ROW_PINS { F1, F0, D0, D2 } #define MATRIX_COL_PINS { B5, B6, C6, C7, F7, F6, F5, F4, D5, B3, B0, B1, B2, D4, D6, D7, B4 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/lefty_r3/info.json b/keyboards/tkc/candybar/lefty_r3/info.json index c902c78cee..a6e14261aa 100644 --- a/keyboards/tkc/candybar/lefty_r3/info.json +++ b/keyboards/tkc/candybar/lefty_r3/info.json @@ -8,6 +8,8 @@ "pid": "0x0003", "device_version": "0.0.6" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c b/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c index 24ed684f8e..149d1e3f0a 100644 --- a/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c +++ b/keyboards/tkc/candybar/lefty_r3/keymaps/default/keymap.c @@ -25,16 +25,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \ - KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \ + KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , + KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), }; diff --git a/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c b/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c index 70aca6eced..8e8f02aee6 100644 --- a/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c +++ b/keyboards/tkc/candybar/lefty_r3/keymaps/via/keymap.c @@ -27,28 +27,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , \ - KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , \ + KC_P7 , KC_P8, KC_P9 , KC_PAST, KC_ESC , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_O , KC_P , KC_DEL , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_PMNS, KC_TAB , KC_A , KC_S , KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , + KC_P1 , KC_P2, KC_P3 , KC_PPLS, KC_LSFT, KC_Z , KC_X, KC_C , KC_V , KC_B, KC_N , KC_M , KC_COMM, KC_DOT , KC_UP ,KC_RSFT , MO(_FL), KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer */ [_FL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), [_AL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), [_LL] = LAYOUT( - KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \ - KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , \ - KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \ + KC_P7 , KC_P8, KC_P9 , KC_VOLU, QK_BOOT , KC_Q , KC_W , KC_E, KC_R , KC_T , KC_Y, KC_U , KC_I , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , + KC_P4 , KC_P5, KC_P6 , KC_VOLD, KC_TAB , KC_A , KC_SCRL, KC_D, KC_F , KC_G , KC_H, KC_J , KC_K , KC_L , KC_QUOT, KC_BSLS , + KC_P1 , KC_P2, KC_P3 , KC_PEQL, KC_LSFT, KC_Z , KC_X, KC_CAPS, KC_V , KC_B, KC_NUM , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , KC_END, KC_P0, KC_PDOT, KC_PENT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC , KC_BSPC, KC_APP , MO(_FL), KC_HOME, KC_PGDN), }; diff --git a/keyboards/tkc/candybar/lefty_r3/rules.mk b/keyboards/tkc/candybar/lefty_r3/rules.mk index 5021259667..92e817504f 100644 --- a/keyboards/tkc/candybar/lefty_r3/rules.mk +++ b/keyboards/tkc/candybar/lefty_r3/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/righty/config.h b/keyboards/tkc/candybar/righty/config.h index 8762bdf515..ebd4742ee3 100644 --- a/keyboards/tkc/candybar/righty/config.h +++ b/keyboards/tkc/candybar/righty/config.h @@ -16,45 +16,11 @@ #pragma once -#include "config_common.h" -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 17 #define DIODE_DIRECTION COL2ROW #define MATRIX_ROW_PINS { A8, A9, A10, A13 } #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/righty/info.json b/keyboards/tkc/candybar/righty/info.json index 4dde92d27f..e964fb2384 100644 --- a/keyboards/tkc/candybar/righty/info.json +++ b/keyboards/tkc/candybar/righty/info.json @@ -8,6 +8,8 @@ "pid": "0x0002", "device_version": "0.0.6" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/righty/rules.mk b/keyboards/tkc/candybar/righty/rules.mk index 52cb35c5a2..36101d2f8e 100644 --- a/keyboards/tkc/candybar/righty/rules.mk +++ b/keyboards/tkc/candybar/righty/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/tkc/candybar/righty_r3/config.h b/keyboards/tkc/candybar/righty_r3/config.h index fd922f0881..5a719c6600 100644 --- a/keyboards/tkc/candybar/righty_r3/config.h +++ b/keyboards/tkc/candybar/righty_r3/config.h @@ -16,45 +16,11 @@ #pragma once -#include "config_common.h" -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 17 #define DIODE_DIRECTION COL2ROW #define MATRIX_ROW_PINS { F6, F7, D0, D2 } #define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, D5, B1, B3, B2, B0, F0, F1, F4, F5 } - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/candybar/righty_r3/info.json b/keyboards/tkc/candybar/righty_r3/info.json index 4dde92d27f..1a93578325 100644 --- a/keyboards/tkc/candybar/righty_r3/info.json +++ b/keyboards/tkc/candybar/righty_r3/info.json @@ -8,6 +8,8 @@ "pid": "0x0002", "device_version": "0.0.6" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c b/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c index 966f67ea90..6b257c1473 100644 --- a/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c +++ b/keyboards/tkc/candybar/righty_r3/keymaps/default/keymap.c @@ -25,16 +25,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = LAYOUT( - KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, \ - KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, \ - KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, \ + KC_ESC,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_DEL,KC_BSPC,KC_P7,KC_P8,KC_P9,KC_PAST, + KC_TAB,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_ENT,KC_P4,KC_P5,KC_P6,KC_PMNS, + KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_RSFT,KC_UP,KC_P1,KC_P2,KC_P3,KC_PPLS, KC_LCTL,KC_LGUI,KC_LALT,KC_SPC,KC_SPC,KC_BSPC,KC_APP,MO(_FL),KC_LEFT,KC_DOWN,KC_RGHT,KC_P0,KC_PDOT,KC_PENT), /* Keymap _FL: Function Layer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}; diff --git a/keyboards/tkc/candybar/righty_r3/keymaps/via/keymap.c b/keyboards/tkc/candybar/righty_r3/keymaps/via/keymap.c index c49d939196..ad0baf41ee 100644 --- a/ |