10 files changed, 0 insertions, 210 deletions
diff --git a/keyboards/tkc/california/config.h b/keyboards/tkc/california/config.h
index 30c95175b9..4dc9cb739a 100644
--- a/keyboards/tkc/california/config.h
+++ b/keyboards/tkc/california/config.h
@@ -69,27 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/candybar/lefty/config.h b/keyboards/tkc/candybar/lefty/config.h
index f8cadbc87c..1badd2f96d 100644
--- a/keyboards/tkc/candybar/lefty/config.h
+++ b/keyboards/tkc/candybar/lefty/config.h
@@ -34,27 +34,6 @@
 //#define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/candybar/lefty_r3/config.h b/keyboards/tkc/candybar/lefty_r3/config.h
index 041f5fe5ee..981ec8b711 100644
--- a/keyboards/tkc/candybar/lefty_r3/config.h
+++ b/keyboards/tkc/candybar/lefty_r3/config.h
@@ -34,27 +34,6 @@
 //#define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/candybar/righty/config.h b/keyboards/tkc/candybar/righty/config.h
index f8cadbc87c..1badd2f96d 100644
--- a/keyboards/tkc/candybar/righty/config.h
+++ b/keyboards/tkc/candybar/righty/config.h
@@ -34,27 +34,6 @@
 //#define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/candybar/righty_r3/config.h b/keyboards/tkc/candybar/righty_r3/config.h
index 7ed53da29c..1297d82b22 100644
--- a/keyboards/tkc/candybar/righty_r3/config.h
+++ b/keyboards/tkc/candybar/righty_r3/config.h
@@ -34,27 +34,6 @@
 //#define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/godspeed75/config.h b/keyboards/tkc/godspeed75/config.h
index ce03240df6..5184691ef2 100644
--- a/keyboards/tkc/godspeed75/config.h
+++ b/keyboards/tkc/godspeed75/config.h
@@ -34,27 +34,6 @@
 //#define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/m0lly/config.h b/keyboards/tkc/m0lly/config.h
index d2bb452a53..53f2a94f18 100644
--- a/keyboards/tkc/m0lly/config.h
+++ b/keyboards/tkc/m0lly/config.h
@@ -95,27 +95,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/osav2/config.h b/keyboards/tkc/osav2/config.h
index e8d6aaa61d..31da9570bd 100644
--- a/keyboards/tkc/osav2/config.h
+++ b/keyboards/tkc/osav2/config.h
@@ -90,27 +90,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/tkc1800/config.h b/keyboards/tkc/tkc1800/config.h
index 9cca323822..b3a335e017 100644
--- a/keyboards/tkc/tkc1800/config.h
+++ b/keyboards/tkc/tkc1800/config.h
@@ -76,27 +76,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define QMK_SPEAKER C6
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/tkc/tkl_ab87/config.h b/keyboards/tkc/tkl_ab87/config.h
index f77a996d29..a7569e5819 100644
--- a/keyboards/tkc/tkl_ab87/config.h
+++ b/keyboards/tkc/tkl_ab87/config.h
@@ -95,27 +95,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */