diff options
Diffstat (limited to 'keyboards/system76/launch_1/readme.md')
| -rw-r--r-- | keyboards/system76/launch_1/readme.md | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/keyboards/system76/launch_1/readme.md b/keyboards/system76/launch_1/readme.md new file mode 100644 index 0000000000..1dcdeccc39 --- /dev/null +++ b/keyboards/system76/launch_1/readme.md @@ -0,0 +1,62 @@ +# System76 Launch Configurable Keyboard (launch_1) + + + +The Launch Configurable Keyboard is engineered to be comfortable, fully customizable, and make your workflow more efficient. + +- High-speed USB Hub +- Works on Linux, Windows and macOS +- 100% Open Source +- Made in Colorado + +Additional Launch Keyboard resources: + +- Keyboard Maintainer: [System76](https://github.com/system76) +- Hardware Supported: [System76 Launch GitHub Repository](https://github.com/system76/launch) +- Hardware Availability: [Shop System76](https://system76.com/accessories/launch) + +## Building Firmware + +To build the firmware using `make` (after setting up the build environment), e.g.: + +```bash +make -r system76/launch_1:default +``` + +Equivalently, using the QMK CLI: + +```bash +qmk compile -kb system76/launch_1 -km default +``` + +## Flashing Firmware (DFU) + +To build and flash the firmware on the keyboard, e.g.: + +```bash +make -r system76/launch_1:default:flash +``` + +Equivalently, using the QMK CLI: + +```bash +qmk flash -kb system76/launch_1 -km default +``` + +## Flashing Firmware (ISP) + +To flash the firmware (and/or bootloader) using ISP refer to the [_ISP Flashing Guide_](https://docs.qmk.fm/#/isp_flashing_guide). + +> **Factory fuse values** => Low: `0x5E`, High: `0x99`, Extended: `0xF3`, Lock Bits: `0xFF` + +## Environment Setup + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. If new to QMK, start with the [_Complete Newbs Guide_](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard. +- **Keycode in layout**: Press the key mapped to `RESET` in the second layer (Escape). +- **Electrical reset**: Briefly short AVR ISP's GND (6) and RST (5) pads on the back of the PCB. |