summaryrefslogtreecommitdiffstats
path: root/keyboards/rgbkb/sol/keymaps
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/rgbkb/sol/keymaps')
-rw-r--r--keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk45
-rw-r--r--keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk44
-rw-r--r--keyboards/rgbkb/sol/keymaps/default/keymap.c350
-rw-r--r--keyboards/rgbkb/sol/keymaps/default/readme.md4
-rw-r--r--keyboards/rgbkb/sol/keymaps/default/rules.mk40
-rw-r--r--keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk51
-rw-r--r--keyboards/rgbkb/sol/keymaps/xulkal/rules.mk48
7 files changed, 266 insertions, 316 deletions
diff --git a/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk b/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk
index 12c8779467..47dd9a7e27 100644
--- a/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk
+++ b/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk
@@ -1,38 +1,15 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix
-RGBLIGHT_ANIMATIONS = yes # LED animations
-LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
-RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
-RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
-RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
-UNICODE_ENABLE = no # Unicode
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000)
-IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
+# Overridden build options from rev1
+
+# RGB Options
+LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
+
+# Misc
+OLED_DRIVER_ENABLE = yes # Enable the OLED Driver
-# Do not edit past here
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
- OPT_DEFS += -DIOS_DEVICE_ENABLE
-else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)
- OPT_DEFS += -DRGBLIGHT_FULL_POWER
-endif
-ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes)
- OPT_DEFS += -DRGB_MATRIX_KEYPRESSES
-endif
-ifeq ($(strip $(LED_MIRRORED)), yes)
- OPT_DEFS += -DLED_MIRRORED
-endif
+
+# Do not edit past here
+
+include keyboards/$(KEYBOARD)/post_rules.mk
diff --git a/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk b/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk
index 09b0e201d5..2993bdacc3 100644
--- a/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk
+++ b/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk
@@ -1,38 +1,14 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix
-RGBLIGHT_ANIMATIONS = yes # LED animations
-LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
-RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
-RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
-RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
-UNICODE_ENABLE = no # Unicode
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000)
-IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
+# Overridden build options from rev1
+
+# Debug Options
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+
-# Do not edit past here
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
- OPT_DEFS += -DIOS_DEVICE_ENABLE
-else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)
- OPT_DEFS += -DRGBLIGHT_FULL_POWER
-endif
-ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes)
- OPT_DEFS += -DRGB_MATRIX_KEYPRESSES
-endif
-ifeq ($(strip $(LED_MIRRORED)), yes)
- OPT_DEFS += -DLED_MIRRORED
-endif
+# Do not edit past here
+
+include keyboards/$(KEYBOARD)/post_rules.mk
+
diff --git a/keyboards/rgbkb/sol/keymaps/default/keymap.c b/keyboards/rgbkb/sol/keymaps/default/keymap.c
index ca73524822..f948dc450f 100644
--- a/keyboards/rgbkb/sol/keymaps/default/keymap.c
+++ b/keyboards/rgbkb/sol/keymaps/default/keymap.c
@@ -5,13 +5,6 @@
#include "split_util.h"
#endif
-extern keymap_config_t keymap_config;
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -23,22 +16,18 @@ enum layer_number {
_ADJ
};
-enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- COLEMAK,
- FN,
- ADJ,
- BACKLIT,
- RGBRST
-};
+// Keycode defines for layers
+#define QWERTY DF(_QWERTY)
+#define COLEMAK DF(_COLEMAK)
+#define FN MO(_FN)
+#define ADJ MO(_ADJ)
-enum macro_keycodes {
- KC_SAMPLEMACRO,
+enum custom_keycodes {
+ RGBRST = SAFE_RANGE,
+ RGB_MENU
};
-
-
-#define FN_ESC LT(_FN, KC_ESC)
+#define FN_ESC LT(_FN, KC_ESC)
#define FN_CAPS LT(_FN, KC_CAPS)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -50,9 +39,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* |FN(CAPS)| A | S | D | F | G | ( | | ) | H | J | K | L | ; | ' |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Shift |
+ * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right |
+ * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | Space| DEL | | Enter| Space|
* `-------------' `-------------'
@@ -74,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* |FN(CAPS)| A | R | S | T | G | ( | | ) | K | N | E | I | O | ' |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Shift |
+ * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Enter |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
@@ -83,9 +72,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_COLEMAK] = LAYOUT( \
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, \
- FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_LPRN, KC_RPRN, KC_K, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_LCBR, KC_RCBR, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, \
+ FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_LPRN, KC_RPRN, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \
KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, \
KC_SPC, KC_DEL, KC_ENT, KC_SPC \
),
@@ -107,8 +96,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_FN] = LAYOUT( \
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
- _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, _______, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \
- _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \
+ _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, KC_SLCK, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_NLCK, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \
_______, _______, _______, _______ \
@@ -134,120 +123,184 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
_______, RGB_SAD, RGB_VAI, RGB_SAI, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
- _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \
+ _______, RGB_SPD, _______, RGB_SPI, _______, _______, _______, _______, _______, RGB_SPI, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+ _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, RGB_SPD, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \
_______, _______, _______, _______ \
)
};
+// For RGBRST Keycode
+#if defined(RGB_MATRIX_ENABLE)
+void rgb_matrix_increase_flags(void)
+{
+ switch (rgb_matrix_get_flags()) {
+ case LED_FLAG_ALL: {
+ rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
+ rgb_matrix_set_color_all(0, 0, 0);
+ }
+ break;
+ case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: {
+ rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
+ rgb_matrix_set_color_all(0, 0, 0);
+ }
+ break;
+ case LED_FLAG_UNDERGLOW: {
+ rgb_matrix_set_flags(LED_FLAG_NONE);
+ rgb_matrix_disable_noeeprom();
+ }
+ break;
+ default: {
+ rgb_matrix_set_flags(LED_FLAG_ALL);
+ rgb_matrix_enable_noeeprom();
+ }
+ break;
+ }
+}
+void rgb_matrix_decrease_flags(void)
+{
+ switch (rgb_matrix_get_flags()) {
+ case LED_FLAG_ALL: {
+ rgb_matrix_set_flags(LED_FLAG_NONE);
+ rgb_matrix_disable_noeeprom();
+ }
+ break;
+ case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: {
+ rgb_matrix_set_flags(LED_FLAG_ALL);
+ rgb_matrix_set_color_all(0, 0, 0);
+ }
+ break;
+ case LED_FLAG_UNDERGLOW: {
+ rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER);
+ rgb_matrix_set_color_all(0, 0, 0);
+ }
+ break;
+ default: {
+ rgb_matrix_set_flags(LED_FLAG_UNDERGLOW);
+ rgb_matrix_enable_noeeprom();
+ }
+ break;
+ }
+}
+#endif
-// define variables for reactive RGB
-bool TOG_STATUS = false;
-int RGB_current_mode;
+#ifdef RGB_OLED_MENU
+uint8_t rgb_encoder_state = 4;
+
+typedef void (*rgb_matrix_f)(void);
+
+const rgb_matrix_f rgb_matrix_functions[6][2] = {
+ { rgb_matrix_increase_hue, rgb_matrix_decrease_hue },
+ { rgb_matrix_increase_sat, rgb_matrix_decrease_sat },
+ { rgb_matrix_increase_val, rgb_matrix_decrease_val },
+ { rgb_matrix_increase_speed, rgb_matrix_decrease_speed },
+ { rgb_matrix_step, rgb_matrix_step_reverse },
+ { rgb_matrix_increase_flags, rgb_matrix_decrease_flags }
+};
+#endif
#ifdef ENCODER_ENABLE
+
+static pin_t encoders_pad_a[] = ENCODERS_PAD_A;
+#define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a)/sizeof(pin_t))
+
+const uint16_t PROGMEM encoders[][NUMBER_OF_ENCODERS * 2][2] = {
+ [_QWERTY] = ENCODER_LAYOUT( \
+ KC_VOLU, KC_VOLD,
+ KC_VOLU, KC_VOLD
+ ),
+ [_COLEMAK] = ENCODER_LAYOUT( \
+ _______, _______,
+ _______, _______
+ ),
+ [_FN] = ENCODER_LAYOUT( \
+ _______, _______,
+ _______, _______
+ ),
+ [_ADJ] = ENCODER_LAYOUT( \
+ _______, _______,
+ _______, _______
+ )
+};
+
void encoder_update_user(uint8_t index, bool clockwise) {
- if (index == 0) { /* First encoder */
- if (clockwise) {
- tap_code(KC_VOLU);
- } else {
- tap_code(KC_VOLD);
- }
- } else if (index == 1) { /* Second encoder*/
- if (clockwise) {
- tap_code(KC_VOLU);
- } else {
- tap_code(KC_VOLD);
+ if (!is_keyboard_master())
+ return;
+
+#ifdef RGB_OLED_MENU
+ if (index == RGB_OLED_MENU) {
+ (*rgb_matrix_functions[rgb_encoder_state][clockwise])();
+ } else
+#endif
+ {
+ uint8_t layer = biton32(layer_state);
+ uint16_t keycode = encoders[layer][index][clockwise];
+ while (keycode == KC_TRANSPARENT && layer > 0)
+ {
+ layer--;
+ if ((layer_state & (1 << layer)) != 0)
+ keycode = encoders[layer][index][clockwise];
}
+ if (keycode != KC_TRANSPARENT)
+ tap_code16(keycode);
}
}
#endif
-// Setting ADJ layer RGB back to default
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
- if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
- #ifdef RGBLIGHT_ENABLE
- //rgblight_mode(RGB_current_mode);
- #endif
- layer_on(layer3);
- } else {
- layer_off(layer3);
- }
-}
-
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
-
+ static uint16_t reset_timer;
switch (keycode) {
- case QWERTY:
+ case RGBRST:
+#if defined(RGBLIGHT_ENABLE)
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ }
+#elif defined(RGB_MATRIX_ENABLE)
+ if (record->event.pressed) {
+ eeconfig_update_rgb_matrix_default();
+ }
+#endif
+ return false;
+ case RESET:
if (record->event.pressed) {
- set_single_persistent_default_layer(_QWERTY);
+ reset_timer = timer_read();
+ } else {
+ if (timer_elapsed(reset_timer) >= 500) {
+ reset_keyboard();
+ }
}
return false;
- break;
- case COLEMAK:
- if(record->event.pressed) {
- set_single_persistent_default_layer(_COLEMAK);
+#if defined(RGB_MATRIX_ENABLE) && defined(KEYBOARD_rgbkb_sol_rev2)
+ case RGB_TOG:
+ if (record->event.pressed) {
+ rgb_matrix_increase_flags();
}
return false;
- break;
- case FN:
+#endif
+ case RGB_MENU:
+#ifdef RGB_OLED_MENU
if (record->event.pressed) {
- //not sure how to have keyboard check mode and set it to a variable, so my work around
- //uses another variable that would be set to true after the first time a reactive key is pressed.
- if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+ if (get_mods() & MOD_MASK_SHIFT) {
+ rgb_encoder_state = (rgb_encoder_state - 1);
+ if (rgb_encoder_state > 5) {
+ rgb_encoder_state = 5;
+ }
} else {
- TOG_STATUS = !TOG_STATUS;
- #ifdef RGBLIGHT_ENABLE
- //rgblight_mode(15);
- #endif
+ rgb_encoder_state = (rgb_encoder_state + 1) % 6;
}
- layer_on(_FN);
- } else {
- #ifdef RGBLIGHT_ENABLE
- //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
- #endif
- layer_off(_FN);
- TOG_STATUS = false;
}
+#endif
return false;
- break;
- case ADJ:
- if (record->event.pressed) {
- layer_on(_ADJ);
- } else {
- layer_off(_ADJ);
- }
- return false;
- break;
- //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
- case RGBRST:
- #ifdef RGBLIGHT_ENABLE
- if (record->event.pressed) {
- eeconfig_update_rgblight_default();
- rgblight_enable();
- RGB_current_mode = rgblight_config.mode;
- }
- #endif
- break;
}
return true;
}
-void matrix_init_user(void) {
-#ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
-#endif
-}
-
-
// OLED Driver Logic
#ifdef OLED_DRIVER_ENABLE
-
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
- if (!has_usb())
- return OLED_ROTATION_180; // flip 180 for offhand
+ if (is_keyboard_master())
+ return OLED_ROTATION_90;
return rotation;
}
@@ -255,62 +308,63 @@ static void render_logo(void) {
static const char PROGMEM sol_logo[] = {
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
- 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
-
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0
+ };
oled_write_P(sol_logo, false);
}
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_FN (1<<_FN)
-#define L_ADJ (1<<_ADJ)
-#define L_ADJ_TRI (L_ADJ|L_FN)
-
static void render_status(void) {
// Render to mode icon
- static const char PROGMEM mode_logo[4][4] = {
- {0x95,0x96,0x0a,0},
- {0xb5,0xb6,0x0a,0},
- {0x97,0x98,0x0a,0},
- {0xb7,0xb8,0x0a,0} };
-
- if (keymap_config.swap_lalt_lgui != false) {
- oled_write_P(mode_logo[0], false);
- oled_write_P(mode_logo[1], false);
- } else {
- oled_write_P(mode_logo[2], false);
- oled_write_P(mode_logo[3], false);
- }
-
- // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
- oled_write_P(PSTR("Layer: "), false);
- switch (layer_state) {
- case L_BASE:
- oled_write_P(PSTR("Default\n"), false);
+ static const char PROGMEM sol_icon[] = {
+ 0x9b,0x9c,0x9d,0x9e,0x9f,
+ 0xbb,0xbc,0xbd,0xbe,0xbf,
+ 0xdb,0xdc,0xdd,0xde,0xdf,0
+ };
+ oled_write_P(sol_icon, false);
+
+ // Define layers here
+ oled_write_P(PSTR("Layer"), false);
+ switch (biton32(layer_state)) {
+ case _QWERTY:
+ oled_write_P(PSTR("BASE "), false);
+ break;
+ case _COLEMAK:
+ oled_write_P(PSTR("CLMK "), false);
break;
- case L_FN:
- oled_write_P(PSTR("FN \n"), false);
+ case _FN:
+ oled_write_P(PSTR("FN "), false);
break;
- case L_ADJ:
- case L_ADJ_TRI:
- oled_write_P(PSTR("ADJ \n"), false);
+ case _ADJ:
+ oled_write_P(PSTR("ADJ "), false);
break;
default:
- oled_write_P(PSTR("UNDEF \n"), false);
+ oled_write_P(PSTR("UNDEF"), false);
}
// Host Keyboard LED Status
- uint8_t led_usb_state = host_keyboard_leds();
- oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLOCK ") : PSTR(" "), false);
- oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false);
- oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCLK ") : PSTR(" "), false);
+ uint8_t led_state = host_keyboard_leds();
+ oled_write_P(PSTR("-----"), false);
+ oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false);
+ oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false);
+ oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false);
+
+#ifdef RGB_OLED_MENU
+ static char buffer[31] = { 0 };
+ snprintf(buffer, sizeof(buffer), "h%3d s%3d v%3d s%3d m%3d e%3d ", rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v, rgb_matrix_config.speed, rgb_matrix_config.mode, rgb_matrix_get_flags());
+ buffer[4 + rgb_encoder_state * 5] = '<';
+
+ oled_write_P(PSTR("-----"), false);
+ oled_write(buffer, false);
+#endif
}
void oled_task_user(void) {
- if (is_keyboard_master())
+ if (is_keyboard_master()) {
render_status();
- else
+ } else {
render_logo();
+ oled_scroll_left();
+ }
}
#endif
diff --git a/keyboards/rgbkb/sol/keymaps/default/readme.md b/keyboards/rgbkb/sol/keymaps/default/readme.md
index 75182c06fc..4a97a7babe 100644
--- a/keyboards/rgbkb/sol/keymaps/default/readme.md
+++ b/keyboards/rgbkb/sol/keymaps/default/readme.md
@@ -10,7 +10,7 @@
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* |FN(CAPS)| A | S | D | F | G | ( | | ) | H | J | K | L | ; | ' |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Shift |
+ * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
@@ -27,7 +27,7 @@
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* |FN(CAPS)| A | R | S | T | G | ( | | ) | K | N | E | I | O | ' |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Shift |
+ * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Enter |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
diff --git a/keyboards/rgbkb/sol/keymaps/default/rules.mk b/keyboards/rgbkb/sol/keymaps/default/rules.mk
index 09b0e201d5..203d59c6a7 100644
--- a/keyboards/rgbkb/sol/keymaps/default/rules.mk
+++ b/keyboards/rgbkb/sol/keymaps/default/rules.mk
@@ -1,38 +1,16 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
+# Default keymap does not have any overridden options from the rev1 / rev2 rules.mk files.
+# Example:
+# if you wanted to disable EXTRAKEY_ENABLE, you would copy the line from the rev1/rules.mk file
+# and paste it in to this file, changing the yes to no. Like so:
+# EXTRAKEY_ENABLE = no # Audio control and System control(+450)
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+# To keep things clean and tidy, as well as make upgrades easier, only place overrides from the defaults in this file.
+
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix
-RGBLIGHT_ANIMATIONS = yes # LED animations
-LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
-RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
-RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
-RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
-UNICODE_ENABLE = no # Unicode
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000)
-IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
-# Do not edit past here
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
- OPT_DEFS += -DIOS_DEVICE_ENABLE
-else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)
- OPT_DEFS += -DRGBLIGHT_FULL_POWER
-endif
+# Do not edit past here
-ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes)
- OPT_DEFS += -DRGB_MATRIX_KEYPRESSES
-endif
+include keyboards/$(KEYBOARD)/post_rules.mk
-ifeq ($(strip $(LED_MIRRORED)), yes)
- OPT_DEFS += -DLED_MIRRORED
-endif
diff --git a/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk b/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk
index 21dca0b116..056959a550 100644
--- a/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk
+++ b/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk
@@ -1,38 +1,21 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix
-RGBLIGHT_ANIMATIONS = no # LED animations
-LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
-RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
-RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
-RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
-UNICODE_ENABLE = no # Unicode
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000)
-IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
+# Overridden build options from rev1 & rev2
-# Do not edit past here
+# Debug Options
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+
+# RGB Options
+RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix
+RGBLIGHT_ANIMATIONS = no # LED animations
+LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
+RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight
+
+# Userspace implements their own LTO
+LINK_TIME_OPTIMIZATION_ENABLE = no
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
- OPT_DEFS += -DIOS_DEVICE_ENABLE
-else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)
- OPT_DEFS += -DRGBLIGHT_FULL_POWER
-endif
-ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes)
- OPT_DEFS += -DRGB_MATRIX_KEYPRESSES
-endif
-ifeq ($(strip $(LED_MIRRORED)), yes)
- OPT_DEFS += -DLED_MIRRORED
-endif
+# Do not edit past here
+
+include keyboards/$(KEYBOARD)/post_rules.mk
+
diff --git a/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk b/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk
index ad0c480349..238d1cf234 100644
--- a/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk
+++ b/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk
@@ -1,37 +1,19 @@
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix
-RGBLIGHT_ANIMATIONS = no # LED animations
-LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
-RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
-RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
-RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
-UNICODE_ENABLE = no # Unicode
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000)
-ENCODER_ENABLE = no # Enable rotary encoder (+90)
-IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone)
+# Overridden build options from rev1 & rev2
+
+# RGB Options
+RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix
+RGBLIGHT_ANIMATIONS = no # LED animations
+LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
+RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight
+FULLHAND_ENABLE = yes # Enables the additional 24 Full Hand LEDs
+
+# Misc
+OLED_DRIVER_ENABLE = yes # Enable the OLED Driver
-# Do not edit past here
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
- OPT_DEFS += -DIOS_DEVICE_ENABLE
-else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)
- OPT_DEFS += -DRGBLIGHT_FULL_POWER
-endif
-ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes)
- OPT_DEFS += -DRGB_MATRIX_KEYPRESSES
-endif
-ifeq ($(strip $(LED_MIRRORED)), yes)
- OPT_DEFS += -DLED_MIRRORED
-endif
+# Do not edit past here
+
+include keyboards/$(KEYBOARD)/post_rules.mk
+