summaryrefslogtreecommitdiffstats
path: root/keyboards/psuieee/pluto12/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/psuieee/pluto12/config.h')
-rw-r--r--keyboards/psuieee/pluto12/config.h110
1 files changed, 7 insertions, 103 deletions
diff --git a/keyboards/psuieee/pluto12/config.h b/keyboards/psuieee/pluto12/config.h
index 60d3f0a501..b59bd05afe 100644
--- a/keyboards/psuieee/pluto12/config.h
+++ b/keyboards/psuieee/pluto12/config.h
@@ -1,4 +1,4 @@
-// Copyright 2021 Willem McGloughlin (wymcg)
+// Copyright 2021-22 Willem McGloughlin (wymcg)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
@@ -16,123 +16,27 @@
#define MATRIX_ROWS 3
#define MATRIX_COLS 4
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
+/* Keyboard Matrix Assignments */
#define MATRIX_ROW_PINS { D0, D4, C6 }
#define MATRIX_COL_PINS { D7, E6, B4, B5 }
#define UNUSED_PINS
+/* Encoder Assignments */
+#define ENCODERS_PAD_A { B6 }
+#define ENCODERS_PAD_B { B2 }
+#define ENCODER_RESOLUTION 4
+
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-//# define RGBLIGHT_ANIMATIONS
-/*== or choose animations ==*/
-//# define RGBLIGHT_EFFECT_BREATHING
-//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//# define RGBLIGHT_EFFECT_SNAKE
-//# define RGBLIGHT_EFFECT_KNIGHT
-//# define RGBLIGHT_EFFECT_CHRISTMAS
-//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//# define RGBLIGHT_EFFECT_RGB_TEST
-//# define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0