summaryrefslogtreecommitdiffstats
path: root/keyboards/lime/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/lime/readme.md')
-rw-r--r--keyboards/lime/readme.md30
1 files changed, 30 insertions, 0 deletions
diff --git a/keyboards/lime/readme.md b/keyboards/lime/readme.md
new file mode 100644
index 0000000000..539ae97fd3
--- /dev/null
+++ b/keyboards/lime/readme.md
@@ -0,0 +1,30 @@
+# Lime Keyboard
+
+![Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/lime_keyboard.jpeg?raw=true)
+
+Lime is a 6×4+6 keys column-staggered split keyboard with encoder and joystick support. Based on [Lily58](https://github.com/kata0510/Lily58), [Corne](https://github.com/foostan/crkbd), [Helix](https://github.com/MakotoKurauchi/helix) and [Sofle](https://github.com/josefadamcik/SofleKeyboard) keyboards. This board features a reversible PCB, OLEDs, Underglow and Bluetooth support. The PCB has holes for floating or screwed mounts but can be also mounted with a gasket.
+
+The Lime keyboard was created by [HellTM](https://github.com/HellSingCoder) with the help of the QMK and custom keyboard community.
+
+Build guide and a build log not available yet
+
+* Keyboard Maintainer: [HellSingCoder](https://www.simonepellegrino.com/) (GitHub: [HellTM](https://github.com/HellSingCoder))
+* Hardware Supported: LimeKeyboard PCB, ProMicro
+* Hardware Availability: [PCB & Case Data](https://github.com/HellSingCoder/LimeKeyboard)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make lime:default
+
+Flashing example for this keyboard:
+
+ make lime:default:flash
+
+Press reset button on he keyboard when asked. You can do that in 3 ways:
+* **Physical reset button**: Briefly press the button near the TRRS connector on the PCB - if you haven't installed one, short the pads instead
+* **Keycode in layout**: Press the key mapped to `RESET` (`Lower` + `Raise` + `Esc` on the default layout)
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+
+Disconnect the first half, connect the second one and repeat the process.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).