diff options
Diffstat (limited to 'keyboards/kc60/config.h')
| -rw-r--r-- | keyboards/kc60/config.h | 92 |
1 files changed, 67 insertions, 25 deletions
diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h index 7c6e695a45..c58aedd76f 100644 --- a/keyboards/kc60/config.h +++ b/keyboards/kc60/config.h @@ -20,12 +20,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0x530A -#define PRODUCT_ID 0x6FFC -#define DEVICE_VER 0x0001 -#define MANUFACTURER NPKC -#define PRODUCT KC60 -#define DESCRIPTION QMK Firmware: KC60 +#define VENDOR_ID 0x530A +#define PRODUCT_ID 0x6FFC +#define DEVICE_VER 0x0001 +#define MANUFACTURER NPKC +#define PRODUCT KC60 /* key matrix size */ #define MATRIX_ROWS 5 @@ -45,39 +44,39 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } #define UNUSED_PINS -/* COL2ROW, ROW2COL*/ +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B6 -#define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 +#define BACKLIGHT_BREATHING -#ifdef RGBLIGHT_ENABLE -# define RGB_DI_PIN F5 -# define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. +#define RGB_DI_PIN F5 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 # define RGBLIGHT_HUE_STEP 8 # define RGBLIGHT_SAT_STEP 8 # define RGBLIGHT_VAL_STEP 8 # define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ /*== all animations enable ==*/ # define RGBLIGHT_ANIMATIONS /*== or choose animations ==*/ -// # define RGBLIGHT_EFFECT_BREATHING -// # define RGBLIGHT_EFFECT_RAINBOW_MOOD -// # define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// # define RGBLIGHT_EFFECT_SNAKE -// # define RGBLIGHT_EFFECT_KNIGHT -// # define RGBLIGHT_EFFECT_CHRISTMAS -// # define RGBLIGHT_EFFECT_STATIC_GRADIENT -// # define RGBLIGHT_EFFECT_RGB_TEST -// # define RGBLIGHT_EFFECT_ALTERNATING +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING /*== customize breathing effect ==*/ /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ # define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 /*==== use exp() and sin() ====*/ -// # define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// # define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ @@ -91,9 +90,52 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |