summaryrefslogtreecommitdiffstats
path: root/keyboards/infinity60/led_controller.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/infinity60/led_controller.c')
-rw-r--r--keyboards/infinity60/led_controller.c57
1 files changed, 16 insertions, 41 deletions
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index 4dc9b92342..707b4e0df6 100644
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -262,10 +262,10 @@ page_status = 0; //start frame 0 (all off/on)
//maintain lock leds
if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) {
- set_lock_leds(USB_LED_NUM_LOCK, 1);
+ set_lock_leds(NUM_LOCK_LED_ADDRESS, 1);
}
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
- set_lock_leds(USB_LED_CAPS_LOCK, 1);
+ set_lock_leds(CAPS_LOCK_LED_ADDRESS, 1);
}
page_status=0;
@@ -308,28 +308,28 @@ page_status = 0; //start frame 0 (all off/on)
//maintain lock leds
if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) {
- set_lock_leds(USB_LED_NUM_LOCK, 1);
+ set_lock_leds(NUM_LOCK_LED_ADDRESS, 1);
}
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
- set_lock_leds(USB_LED_CAPS_LOCK, 1);
+ set_lock_leds(CAPS_LOCK_LED_ADDRESS, 1);
}
break;
case TOGGLE_NUM_LOCK:
//msg_led = 0 or 1, off/on
- set_lock_leds(USB_LED_NUM_LOCK, msg_led);
+ set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_led);
break;
case TOGGLE_CAPS_LOCK:
//msg_led = 0 or 1, off/on
- set_lock_leds(USB_LED_CAPS_LOCK, msg_led);
+ set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_led);
break;
//TODO: MODE_BREATH
case MODE_BREATH:
break;
case STEP_BRIGHTNESS:
- xprintf("TOGGLE_BACKLIGHT\n");
+ xprintf("STEP_BACKLIGHT\n");
chThdSleepMilliseconds(10);
//led_msg = step pwm up or down
switch (msg_led) {
@@ -458,45 +458,20 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
led_control_reg[1] = column_byte;
}
-void set_lock_leds(uint8_t lock_type, uint8_t led_on) {
- uint8_t page, led_addr, start, temp;
+void set_lock_leds(uint8_t led_addr, uint8_t led_action) {
+ uint8_t page, temp;
uint8_t led_control_word[2] = {0};
//TODO: this function call could send led address vs lock_type.
//however, the switch/case allows for additional steps, like audio, depending on type
- led_addr = 0;
- switch(lock_type) {
- case USB_LED_NUM_LOCK:
- led_addr = NUM_LOCK_LED_ADDRESS;
- break;
- case USB_LED_CAPS_LOCK:
- led_addr = CAPS_LOCK_LED_ADDRESS;
- break;
- #ifdef SCROLL_LOCK_LED_ADDRESS
- case USB_LED_SCROLL_LOCK:
- led_addr = SCROLL_LOCK_LED_ADDRESS;
- break;
- #endif
- #ifdef COMPOSE_LED_ADDRESS
- case USB_LED_COMPOSE:
- led_addr = COMPOSE_LED_ADDRESS;
- break;
- #endif
- #ifdef SCROLL_LOCK_LED_ADDRESS
- case USB_LED_KANA:
- led_addr = KANA_LED_ADDRESS;
- break;
- #endif
- }
-
//ignore frame0 if all leds are on or if option set in led_controller.h
//TODO: blink of all leds are on, clear blink register if not
- is31_read_register(0, 0x00, &temp);
- led_addr += temp == 0 ? 0 : 0x12;//send bit to blink register instead
- start = BACKLIGHT_OFF_LOCK_LED_OFF ? 1 : 0;
+ //is31_read_register(0, 0x00, &temp);
+ //led_addr += temp == 0 ? 0 : 0x12;//send bit to blink register instead
+ //start = BACKLIGHT_OFF_LOCK_LED_OFF ? 1 : 0;
- for(page=start; page<8; page++) {
- set_led_bit(page,led_control_word,led_addr,led_on);
+ for(page=0; page<8; page++) {
+ set_led_bit(page,led_control_word,led_addr,led_action);
is31_write_data(page, led_control_word, 0x02);
}
}
@@ -558,8 +533,8 @@ void led_controller_init(void) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
// clean up the lock LEDs
- set_lock_leds(USB_LED_NUM_LOCK, 0);
- set_lock_leds(USB_LED_CAPS_LOCK, 0);
+ set_lock_leds(NUM_LOCK_LED_ADDRESS, 0);
+ set_lock_leds(CAPS_LOCK_LED_ADDRESS, 0);
/* more time consuming LED processing should be offloaded into
* a thread, with asynchronous messaging. */