summaryrefslogtreecommitdiffstats
path: root/keyboards/handwired
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired')
-rwxr-xr-xkeyboards/handwired/maartenwut/config.h45
-rwxr-xr-xkeyboards/handwired/maartenwut/keymaps/default/keymap.c46
-rwxr-xr-xkeyboards/handwired/maartenwut/maartenwut.c13
-rwxr-xr-xkeyboards/handwired/maartenwut/maartenwut.h23
-rwxr-xr-xkeyboards/handwired/maartenwut/rules.mk67
5 files changed, 194 insertions, 0 deletions
diff --git a/keyboards/handwired/maartenwut/config.h b/keyboards/handwired/maartenwut/config.h
new file mode 100755
index 0000000000..066f138560
--- /dev/null
+++ b/keyboards/handwired/maartenwut/config.h
@@ -0,0 +1,45 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xBB80
+#define PRODUCT_ID 0x050D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Maartenwut
+#define PRODUCT Ortho
+#define DESCRIPTION Handwired ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F0, F1, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define QMK_ESC_OUTPUT C6 // usually COL
+#define QMK_ESC_INPUT D0 // usually ROW
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/keymaps/default/keymap.c b/keyboards/handwired/maartenwut/keymaps/default/keymap.c
new file mode 100755
index 0000000000..1c9eff9d81
--- /dev/null
+++ b/keyboards/handwired/maartenwut/keymaps/default/keymap.c
@@ -0,0 +1,46 @@
+#include "maartenwut.h"
+
+#define _MA 0
+#define _NU 1
+#define _FL 2
+#define _GA 3
+#define _AR 4
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define LSHIFT OSM(MOD_LSFT)
+#define SPACE LT(_AR, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT,
+ LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PSCR,
+ KC_LCTL, KC_LGUI, KC_LALT, MO(_NU), SPACE, KC_SPC, MO(_FL), KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT),
+[_NU] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ KC_CAPS, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, KC_0, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+[_FL] = KEYMAP(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY,
+ RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, TG(_GA), _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+[_GA] = KEYMAP(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, _______),
+[_AR] = KEYMAP(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)
+}; \ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/maartenwut.c b/keyboards/handwired/maartenwut/maartenwut.c
new file mode 100755
index 0000000000..6a7c5cee62
--- /dev/null
+++ b/keyboards/handwired/maartenwut/maartenwut.c
@@ -0,0 +1,13 @@
+#include "maartenwut.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+}; \ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/maartenwut.h b/keyboards/handwired/maartenwut/maartenwut.h
new file mode 100755
index 0000000000..0e47d63861
--- /dev/null
+++ b/keyboards/handwired/maartenwut/maartenwut.h
@@ -0,0 +1,23 @@
+#ifndef MAARTENWUT_H
+#define MAARTENWUT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define KEYMAP( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k40, k41, k42, k43, k45, k47, k49, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+ {k40, k41, k42, k43, XXX, k45, XXX, k47, XXX, k49, k4a, k4b, k4c, k4d} \
+}
+
+#endif \ No newline at end of file
diff --git a/keyboards/handwired/maartenwut/rules.mk b/keyboards/handwired/maartenwut/rules.mk
new file mode 100755
index 0000000000..7ed63c65ec
--- /dev/null
+++ b/keyboards/handwired/maartenwut/rules.mk
@@ -0,0 +1,67 @@
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6