diff options
Diffstat (limited to 'keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h')
| -rw-r--r-- | keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h | 20 |
1 files changed, 12 insertions, 8 deletions
diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 92bbe26e12..b2a240f9ff 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -31,22 +31,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW -#define USB_VBUS_PIN B10 +// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */ #define SPLIT_HAND_PIN C14 // high = left, low = right // WS2812 RGB LED strip input and number of LEDs #define RGB_DI_PIN A1 -#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2 +#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 #define WS2812_PWM_CHANNEL 2 // default: 2 -#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). -#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define RGBLED_NUM 20 #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ { 10, 10 } +#define RGBLIGHT_LIMIT_VAL 80 #define DEBUG_LED_PIN C13 @@ -72,7 +73,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_SDA_PIN B9 #define I2C1_SCL_PAL_MODE 4 #define I2C1_SDA_PAL_MODE 4 -#define I2C1_CLOCK_SPEED 400000 +// #define I2C1_CLOCK_SPEED 400000 +/* For Legacy Compatibility: */ +#define I2C1_SCL 8 +#define I2C1_SDA 9 /* encoder config */ #define ENCODERS_PAD_A \ @@ -91,7 +95,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* eeprom config */ #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 -#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 // #define EXTERNAL_EEPROM_PAGE_SIZE 32 // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 @@ -100,4 +104,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* pmw3360 config */ #define PMW3360_CS_PIN B0 #define PMW3360_SPI_MODE 3 -#define PMW3360_SPI_DIVISOR 4 +#define PMW3360_SPI_DIVISOR 64 |